Volkswagen ID.3 Charging at Lidl Charging

Volkswagen ID.3 Charger Will Not Start a Session

You plugged in your ID.3 and the charger just sits there. No power, no animation on the infotainment screen, nothing happening. Whether you are at a public DC fast charger or an AC destination charger, there are a few specific things to check before giving up on this station.

Symptoms

• CCS2 connector is plugged into the right rear charge port but the charger shows 'Waiting'
• Infotainment screen shows no charging activity after connecting the cable
• Charger display says 'Authorization required' even though you tapped your card
• Charge port LED on the right rear does not change color after plugging in
• We Charge or Elli app shows the car as connected but not charging

What to Do

1. 1

   Unplug and reseat the CCS2 connector

   Remove the connector from the right rear charge port completely. Wait five seconds. Reinsert it firmly until you hear the latch click. Make sure the two DC pins at the bottom of the CCS2 plug are aligned and fully engaged.

2. 2

   Authorize the session manually

   Check the charger display. If it says 'Waiting for authorization' or similar, tap your RFID card on the reader, open the charger operator's app, or use contactless payment. Do not assume Plug & Charge will work unless you have confirmed it is active.

3. 3

   Check for scheduled charging in the infotainment

   On the ID.3's infotainment screen, go to the charging settings. Look for departure timer or scheduled charging. If it is active, disable it or select 'Charge Now' to start immediately.

4. 4

   Verify Plug & Charge setup in the We Charge app

   Open the We Charge or Elli app on your phone. Check that Plug & Charge is enabled and your payment method is valid. If Plug & Charge has never been set up, you will need to authorize sessions manually at every charger.

5. 5

   Restart the infotainment system

   Press and hold the power button on the infotainment screen for about 10 seconds until it goes black. Wait for it to restart. This can resolve communication glitches between the ID. Software and the charger without affecting the car's other systems.

6. 6

   Try a different charger or connector

   If the session still will not start, the charger may be faulted. Try a different connector at the same station, or find a nearby alternative using the We Charge app or the ID.3's built-in charger finder.

Volkswagen ID.3 Payment Failed at Charging Station

You are at the charger, your ID.3 is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting for authorization. Payment problems at public chargers are common, and they usually have nothing to do with your car. Here is how to get charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger reader
• We Charge or Elli app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two different payment options covers most situations.

2. 2

   Check the We Charge or Elli app

   Open the We Charge or Elli app on your phone. Make sure your account is active, your payment method is valid, and there are no outstanding charges. Try starting the session remotely through the app.

3. 3

   Scan the charger QR code

   Most public chargers have a QR code on the unit. Scan it with your phone camera. This opens the operator's payment page in your browser, where you can usually pay with a credit card without downloading their specific app.

4. 4

   Check your bank app for blocked transactions

   Open your banking app and look for flagged or declined transactions. If you see a notification about a blocked payment, approve it and try the charger again.

5. 5

   Try Plug & Charge if available

   If the charger supports Plug & Charge and your ID.3 has it activated through We Charge, unplug and replug the CCS2 connector into the right rear charge port. Payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works, the charger's payment system may be completely down. Find a nearby alternative using the We Charge app or the ID.3's built-in charger finder on the infotainment screen.

Volkswagen ID.3 Charging Slower Than Expected

You plugged in your ID.3 expecting 130 kW and the infotainment screen shows 40 kW. Or your wallbox at home is stuck at 3 kW instead of 11 kW. The ID.3 Pro has a smaller 59 kWh battery than its siblings, which means the charging curve tapers sooner. But most slow charging has a fixable cause.

Symptoms

• DC fast charging power well below the 130 kW maximum shown on the infotainment display
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 55-60% during DC fast charging
• Infotainment display shows a long estimated time to reach your target percentage
• Different CCS2 chargers consistently deliver less power than expected

What to Do

1. 1

   Check if preconditioning was active

   On the infotainment screen, look for battery temperature indicators when charging. If the battery was cold, enable preconditioning in the We Charge or Elli app before your next fast charging stop. You can also set a departure time, which warms the battery before you leave.

2. 2

   Check your current state of charge

   If you are above 60%, the reduced speed is expected on the 59 kWh pack. For the fastest DC charging, arrive at the charger between 10-20%. The ID.3 Pro peaks early and tapers sooner than larger-battery VW models.

3. 3

   Verify the charger is not sharing power

   Check if another car is plugged into the same charging station. Some stations split available power between users. If possible, move to a charger unit where no other car is connected.

4. 4

   Check the AC charge current setting

   On the infotainment screen, navigate to the charging settings. Look for the AC charge current or amperage limit. Make sure it is set to the maximum. This only affects AC charging at home or destination chargers.

5. 5

   Try a different charger

   If speeds remain low, the charger may be delivering less than its rated power. Try a different station. Use the We Charge app or the ID.3's built-in charger finder to locate alternatives nearby.

6. 6

   Check for a software update

   Go to the settings menu on the infotainment screen and check for available ID. Software updates. VW has improved charging curves through software updates on MEB platform vehicles. Install any pending updates.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.