Renault 5 E-Tech Charging at Lidl Charging

Renault 5 E-Tech Charger Will Not Start a Session

You are at the charger, the connector is in your Renault 5, but nothing happens. The screen stays idle, or you get an error message and the session never begins. This is one of the most common frustrations at public chargers, and it is almost always fixable on the spot.

Symptoms

• Charger screen stays on the welcome page after plugging in
• Charger shows an error code and returns to the start screen
• Charge port light on the Renault 5 does not illuminate or flashes red
• Connector clicks in but the car does not acknowledge the connection
• Charger displays 'Vehicle not detected' or 'Communication error'

What to Do

1. 1

   Reinsert the connector firmly

   Remove the connector from the Renault 5, check for debris or moisture in the charge port, and push the connector back in straight and firm until you hear a click. The charge port indicator should light up.

2. 2

   Open the charge port flap completely

   Make sure the fuel cap-style flap at the right rear is fully open and not obstructing the connector. If it is stuck in cold weather, gently push it or use warm water to clear ice. Do not force it.

3. 3

   Check that the car is ready to charge

   Verify the Renault 5 is in Park. On the OpenR Link screen, check the charging settings for any scheduled charging that might block immediate charging. Disable the schedule if you need to charge now.

4. 4

   Authenticate with the charger

   Tap your RFID card on the charger's reader, start the session through the operator's app, or use contactless payment. Make sure you select the correct stall number if using an app. Wait for the charger screen to confirm authorization.

5. 5

   Try a different stall

   If the charger still will not start after reinserting the connector and authenticating, the stall may be faulty. Try a different stall at the same station. If all stalls fail, find the nearest alternative using Google Maps on the OpenR Link screen.

6. 6

   Lock and unlock the car

   Locking and unlocking the Renault 5 with the key fob or the MY Renault app can reset the charge port communication. After unlocking, open the charge port flap and try plugging in again.

Renault 5 E-Tech Charging Payment Failed at Station

You are at the charger, your Renault 5 is plugged in, but the payment will not go through. The charger says 'Authorization failed' or just does nothing after you tap your card. Payment problems are one of the most common reasons a charge never starts, and you can usually fix them in a minute or two.

Symptoms

• Charger screen shows 'Authorization failed' or 'Payment declined' after tapping a card
• Charger app shows an error when trying to start a session
• Contactless bank card is declined at the charger terminal
• RFID card tap produces no response from the charger
• Charger accepts payment but the session ends immediately with zero kWh

What to Do

1. 1

   Try the charger operator's app

   Look for the operator name on the charger (Ionity, Shell Recharge, Allego, Fastned, etc.). Download their app if you do not have it, add a payment method, and start the session. Double-check that you selected the correct stall number.

2. 2

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try an RFID card or the operator's app. Having at least two options means you are rarely stuck.

3. 3

   Check your bank card balance

   Open your banking app and confirm you have enough available balance for the pre-authorization hold. Previous charging sessions may have pending holds that temporarily reduce your available funds.

4. 4

   Check your charging service subscription

   If you use a Mobilize or roaming charging service, open the MY Renault app and verify your subscription is active and the payment method is valid. Renew or update it if needed.

5. 5

   Reset the charger

   Press the stop or reset button on the charger. Wait for it to return to the welcome screen. Unplug the connector from your Renault 5, wait 30 seconds, plug back in, and try authenticating again.

6. 6

   Move to a different stall or station

   If nothing works at this stall, try a different one at the same station. Payment terminals fail independently. If the whole station is down, use Google Maps on your OpenR Link screen to find the nearest alternative.

Renault 5 E-Tech Charging Slower Than Expected

You plugged in your Renault 5 E-Tech expecting 100 kW and the screen shows 30 kW. Or your home wallbox is delivering 3 kW instead of 11 kW. The Renault 5 has a smaller 52 kWh battery that charges efficiently when conditions are right, but a few common factors can cut the speed significantly.

Symptoms

• DC fast charging speed well below the 100 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops noticeably after 50-60%
• OpenR Link display shows lower power than the charger's rating
• Charging takes much longer than the estimated time shown in the MY Renault app

What to Do

1. 1

   Precondition the battery before arriving

   Use the MY Renault app or the car's climate scheduling to warm the battery before a fast charge. If you are on a road trip, driving for at least 20-30 minutes before stopping warms the battery naturally. Set your charging stop as a navigation destination in OpenR Link to activate automatic preconditioning.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is normal. For the fastest charging, arrive at the charger between 10-20% and charge to 80%. This keeps you in the Renault 5's peak charging range.

3. 3

   Verify the charger's rated power

   Look at the charger unit for its power rating. If it says 50 kW, that is the maximum you will get. For faster charging, look for chargers rated at 100 kW or higher. The MY Renault app and Google Maps (built into OpenR Link) can filter by charger speed.

4. 4

   Check if the charger is shared

   Look at the charging station. If another car is charging at the next stall on the same unit, your power may be split. Move to an unoccupied unit if one is available.

5. 5

   Check your home AC setup

   For home charging, verify whether your wallbox is wired for 3-phase. Check the Renault 5's charging settings to confirm the AC charge current is at maximum. A single-phase installation limits you to about 3.7 kW.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.