Volkswagen ID.3 Charging at Ionity

Volkswagen ID.3 Charger Will Not Start a Session

You plugged in your ID.3 and the charger just sits there. No power, no animation on the infotainment screen, nothing happening. Whether you are at a public DC fast charger or an AC destination charger, there are a few specific things to check before giving up on this station.

Symptoms

• CCS2 connector is plugged into the right rear charge port but the charger shows 'Waiting'
• Infotainment screen shows no charging activity after connecting the cable
• Charger display says 'Authorization required' even though you tapped your card
• Charge port LED on the right rear does not change color after plugging in
• We Charge or Elli app shows the car as connected but not charging

What to Do

1. 1

   Unplug and reseat the CCS2 connector

   Remove the connector from the right rear charge port completely. Wait five seconds. Reinsert it firmly until you hear the latch click. Make sure the two DC pins at the bottom of the CCS2 plug are aligned and fully engaged.

2. 2

   Authorize the session manually

   Check the charger display. If it says 'Waiting for authorization' or similar, tap your RFID card on the reader, open the charger operator's app, or use contactless payment. Do not assume Plug & Charge will work unless you have confirmed it is active.

3. 3

   Check for scheduled charging in the infotainment

   On the ID.3's infotainment screen, go to the charging settings. Look for departure timer or scheduled charging. If it is active, disable it or select 'Charge Now' to start immediately.

4. 4

   Verify Plug & Charge setup in the We Charge app

   Open the We Charge or Elli app on your phone. Check that Plug & Charge is enabled and your payment method is valid. If Plug & Charge has never been set up, you will need to authorize sessions manually at every charger.

5. 5

   Restart the infotainment system

   Press and hold the power button on the infotainment screen for about 10 seconds until it goes black. Wait for it to restart. This can resolve communication glitches between the ID. Software and the charger without affecting the car's other systems.

6. 6

   Try a different charger or connector

   If the session still will not start, the charger may be faulted. Try a different connector at the same station, or find a nearby alternative using the We Charge app or the ID.3's built-in charger finder.

Volkswagen ID.3 Payment Failed at Charging Station

You are at the charger, your ID.3 is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting for authorization. Payment problems at public chargers are common, and they usually have nothing to do with your car. Here is how to get charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger reader
• We Charge or Elli app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two different payment options covers most situations.

2. 2

   Check the We Charge or Elli app

   Open the We Charge or Elli app on your phone. Make sure your account is active, your payment method is valid, and there are no outstanding charges. Try starting the session remotely through the app.

3. 3

   Scan the charger QR code

   Most public chargers have a QR code on the unit. Scan it with your phone camera. This opens the operator's payment page in your browser, where you can usually pay with a credit card without downloading their specific app.

4. 4

   Check your bank app for blocked transactions

   Open your banking app and look for flagged or declined transactions. If you see a notification about a blocked payment, approve it and try the charger again.

5. 5

   Try Plug & Charge if available

   If the charger supports Plug & Charge and your ID.3 has it activated through We Charge, unplug and replug the CCS2 connector into the right rear charge port. Payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works, the charger's payment system may be completely down. Find a nearby alternative using the We Charge app or the ID.3's built-in charger finder on the infotainment screen.

Volkswagen ID.3 Charging Slower Than Expected

You plugged in your ID.3 expecting 130 kW and the infotainment screen shows 40 kW. Or your wallbox at home is stuck at 3 kW instead of 11 kW. The ID.3 Pro has a smaller 59 kWh battery than its siblings, which means the charging curve tapers sooner. But most slow charging has a fixable cause.

Symptoms

• DC fast charging power well below the 130 kW maximum shown on the infotainment display
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 55-60% during DC fast charging
• Infotainment display shows a long estimated time to reach your target percentage
• Different CCS2 chargers consistently deliver less power than expected

What to Do

1. 1

   Check if preconditioning was active

   On the infotainment screen, look for battery temperature indicators when charging. If the battery was cold, enable preconditioning in the We Charge or Elli app before your next fast charging stop. You can also set a departure time, which warms the battery before you leave.

2. 2

   Check your current state of charge

   If you are above 60%, the reduced speed is expected on the 59 kWh pack. For the fastest DC charging, arrive at the charger between 10-20%. The ID.3 Pro peaks early and tapers sooner than larger-battery VW models.

3. 3

   Verify the charger is not sharing power

   Check if another car is plugged into the same charging station. Some stations split available power between users. If possible, move to a charger unit where no other car is connected.

4. 4

   Check the AC charge current setting

   On the infotainment screen, navigate to the charging settings. Look for the AC charge current or amperage limit. Make sure it is set to the maximum. This only affects AC charging at home or destination chargers.

5. 5

   Try a different charger

   If speeds remain low, the charger may be delivering less than its rated power. Try a different station. Use the We Charge app or the ID.3's built-in charger finder to locate alternatives nearby.

6. 6

   Check for a software update

   Go to the settings menu on the infotainment screen and check for available ID. Software updates. VW has improved charging curves through software updates on MEB platform vehicles. Install any pending updates.

Session won't start after contactless payment

You tap your card, the reader beeps, but the charger never begins delivering power. This is one of the most reported issues at Ionity stations.

Symptoms

• Contactless reader shows a green light but nothing happens
• Screen says 'Initializing' for more than 60 seconds
• Card is charged a pre-authorization hold but no energy is delivered
• Error message appears after the tap but disappears too quickly to read

How to Fix It

1. 1

   Unplug the cable and wait 10 seconds

   This resets the charger's session state. Plug the cable back in firmly until you hear the locking click.

2. 2

   Try a different payment method

   Open the Ionity app and start the session from there instead. If you have an Ionity subscription, use the app. App-initiated sessions bypass the contactless reader entirely.

3. 3

   Check your card's contactless limit

   Some banks block contactless transactions above a certain amount. Ionity may pre-authorize up to 100 EUR. If your bank flags this, the session fails silently.

4. 4

   Move to another stall at the same station

   Individual charger units can have faulty card readers while the rest of the station works fine. Try the next available stall.

5. 5

   Check for a pending hold on your bank statement

   If a hold was placed but no session started, it typically releases within 3 to 7 business days. You will not be charged for energy you did not receive.

Plug & Charge pairing fails

Your vehicle supports Plug & Charge (ISO 15118) but the Ionity station does not recognize it. The charger asks for payment instead of starting automatically.

Symptoms

• Charger prompts for app or card payment instead of starting automatically
• Screen shows 'Vehicle not recognized'
• Plug & Charge worked at this station before but stopped working
• Pairing completed in the Ionity app but the station still asks for payment

How to Fix It

1. 1

   Verify Plug & Charge is enabled in your vehicle settings

   Some vehicles (like Porsche Taycan, BMW iX, Mercedes EQS) have a toggle in the infotainment system. If it was turned off during a software update, the charger cannot identify your car.

2. 2

   Re-pair your vehicle in the Ionity app

   Go to the Ionity app, navigate to Plug & Charge settings, remove the existing pairing, and set it up again. This refreshes the digital certificate.

3. 3

   Check that your Ionity subscription is active

   Plug & Charge on Ionity requires an active subscription. If your subscription lapsed, the auto-start will fail even if the pairing is intact.

4. 4

   Try unplugging and re-plugging slowly

   The ISO 15118 handshake happens in the first few seconds. If you plug in too quickly or the connector is not fully seated, the handshake times out and the charger falls back to manual payment.

5. 5

   Start the session via the app as a fallback

   Plug & Charge issues are often caused by backend certificate mismatches. You can still charge at Ionity subscription rates by starting the session through the app while the issue is resolved.

Charger screen frozen or unresponsive

The charger display is stuck on a loading screen, shows garbled text, or does not respond to touch. The hardware may still work even if the screen does not.

Symptoms

• Screen shows a logo or loading animation that never progresses
• Touch inputs on the screen do nothing
• Screen is completely black but the charger lights are on
• Screen shows an error code that does not clear

How to Fix It

1. 1

   Try plugging in and starting via the app

   The screen and the charging hardware are separate systems. Many Ionity chargers will still deliver power even with a frozen display if you initiate the session through the Ionity app.

2. 2

   Unplug completely and wait 30 seconds

   Sometimes unplugging triggers a soft reset of the charger unit. Wait, then try again.

3. 3

   Try a different stall

   Ionity stations typically have multiple charger units. A frozen screen on one unit does not affect the others.

4. 4

   Report the charger in the Ionity app

   Open the Ionity app, find the station, and report the specific charger as out of order. This helps Ionity dispatch maintenance faster.

App shows station available but charger is faulted

The Ionity app shows green (available) status for a station, but when you arrive, the chargers display errors or are physically out of service.

Symptoms

• App shows 'Available' but charger displays 'Out of Order'
• All stalls at the station are faulted despite the app showing availability
• Charger has a maintenance sticker or barrier but the app has not been updated
• You drove to a station specifically because the app said it was free

How to Fix It

1. 1

   Refresh the station status in the app

   Pull down to refresh the station view. Status updates can lag by several minutes, especially after a charger was recently reported or rebooted.

2. 2

   Check individual charger status, not just the station

   Tap into the station details in the Ionity app. Even if some stalls show faulted, others at the same station may still work.

3. 3

   Try plugging in anyway

   Occasionally a charger shows a stale error on its screen from a previous session but works fine for the next user. Plug in and attempt to start via the app.

4. 4

   Plan a backup station

   Before driving to an Ionity station, check if there is an alternative station within 10 to 15 minutes. Ionity stations along highways sometimes have another Ionity or competitor station at the next exit.

5. 5

   Report the discrepancy

   Use the 'Report a problem' option in the Ionity app. Accurate reports help Ionity fix status sync issues and prioritize maintenance.

Unexpectedly high ad-hoc price

You charged without an Ionity subscription subscription and the per-kWh price is significantly higher than you expected. Ionity's ad-hoc rate is one of the most expensive in Europe.

Symptoms

• Invoice shows 0.75 EUR/kWh or higher
• Total cost for a short session is much higher than expected
• Price displayed on the charger screen was not noticed before starting
• You assumed the price would be similar to home charging or other networks

How to Fix It

1. 1

   Check if Ionity subscription would save you money

   Ionity offers subscription plans that reduce the per-kWh price significantly. Check the Ionity app for current plans and rates. If you charge at Ionity more than once or twice a month, a subscription usually pays for itself.

2. 2

   Check your vehicle manufacturer's charging plan

   Many EV manufacturers (Hyundai, Kia, BMW, Mercedes, Volkswagen Group, Ford) offer bundled Ionity pricing through their own apps. You may already have access to a discounted rate through your car brand.

3. 3

   Look at the charger screen before starting next time

   Ionity displays the per-kWh price on the charger screen before the session starts. The ad-hoc price is always shown.

4. 4

   Consider roaming providers for occasional use

   If you do not want a subscription, some roaming apps (like Shell Recharge, Chargemap, or Maingau) offer lower Ionity rates than the ad-hoc price.

Charging speed much lower than 350 kW

The station advertises 350 kW but your vehicle is charging at a fraction of that speed. This can be normal or it can indicate a problem.

Symptoms

• Dashboard shows 50 to 100 kW at a 350 kW charger
• Charging started fast but dropped sharply after a few minutes
• Other vehicles at the same station seem to charge faster
• Speed is lower than what you normally get at Ionity

How to Fix It

1. 1

   Check your battery level

   Charging speed drops significantly above 60 to 80% state of charge on most vehicles. This is normal battery behavior, not an Ionity issue. For the fastest stop, charge from 10 to 80% and move on.

2. 2

   Check the battery temperature

   Cold batteries charge slowly. If your vehicle supports battery preconditioning, set the Ionity station as your navigation destination. The car will warm the battery on the way there.

3. 3

   Verify your vehicle's max DC charging speed

   Not all EVs can accept 350 kW. Many popular models top out at 100 to 150 kW. The charger delivers only what the vehicle requests.

4. 4

   Try a different stall

   Individual charger units can occasionally have hardware limitations or faults that reduce output. Moving to another stall at the same station can sometimes restore full speed.

5. 5

   Check for power sharing

   Some Ionity stations share power between adjacent stalls. If the neighboring stall is also in use, both vehicles may receive reduced power. Try a stall that is not next to another active session.