Maxus eDeliver 3 Charging at Iberdrola

Maxus eDeliver 3 Charger Will Not Start Charging

You plugged in the CCS2 cable and nothing happened. Or the charger keeps showing an error. The eDeliver 3 is a solid delivery van, but as a less common brand in Europe, it can occasionally encounter compatibility issues with certain chargers. Most start failures come down to authentication, cable seating, or charger compatibility.

Symptoms

• CCS2 connector plugged in but charger shows no active session
• Charger displays an error code immediately after connecting
• Dashboard shows the charge port is connected but charging does not begin
• Cable does not lock into the CCS2 port on the eDeliver 3
• Charger starts the handshake but fails with a protocol error

What to Do

1. 1

   Remove and reseat the CCS2 connector

   Pull the connector out completely, wait 10 seconds, and push it back in firmly. Make sure it clicks and locks. Check the charge port for debris.

2. 2

   Turn the vehicle off and on

   Switch the eDeliver 3 fully off, wait 30 seconds, then turn it back on. Unplug and replug the cable. This resets the charging communication system.

3. 3

   Re-authenticate with the charger

   Cancel any active session in your charging app and start fresh. If using RFID, hold the card against the reader for a few seconds. Try authenticating before you plug in if the charger supports that flow.

4. 4

   Try a different charger brand

   If the eDeliver 3 will not start on this charger, try a different brand of charger. The eDeliver 3 may have better compatibility with some charger manufacturers. Note which ones work for future reference.

5. 5

   Check for software updates

   Contact your Maxus dealer or check the Maxus app. Software updates can fix charging compatibility issues. The Maxus service network in Europe is smaller, so plan service visits ahead of time.

6. 6

   Contact Maxus support

   If the eDeliver 3 consistently fails to start on multiple chargers, there may be a vehicle-side issue. Contact your Maxus dealer. Keep a log of which chargers failed and any error codes displayed.

Maxus eDeliver 3 Charging Payment Failed at DC

The charger is right there, your eDeliver 3 needs a charge, and the payment just failed. Payment issues at public chargers have nothing to do with your van. They are about the charging network, your card, or your phone signal. Here is how to get around it and get charging.

Symptoms

• Charger displays a payment error or 'transaction declined' message
• Charging app shows 'session failed to start' after payment attempt
• RFID card is not recognized by the charger reader
• Contactless bank card tap does not register
• Authorization starts but times out before the charger delivers power

What to Do

1. 1

   Try a different payment method

   Switch from RFID to app or from app to contactless bank card. Always carry at least two options so one failure does not leave you stranded.

2. 2

   Check your mobile signal

   If signal is weak, the app cannot complete the transaction. Step away from walls or structures and try again.

3. 3

   Verify your payment details

   Open the charging app and check that your card is valid and up to date. Update if the card has been replaced.

4. 4

   Check accepted networks on the charger

   Look for logos showing which networks and apps work at this charger. If yours is not listed, you need a different payment method or a different charger.

5. 5

   Contact your fleet manager

   If using a company RFID card that is not working, your manager can check if the card is active and has no restrictions. Most RFID cards have a support number printed on them.

6. 6

   Find a nearby alternative charger

   If payment is not working here, check your app for the next closest charger on your route. Move on rather than losing delivery time.

Maxus eDeliver 3 Charging Slower Than Expected

You stopped at a public charger expecting a quick top-up and the charger shows 15 kW instead of the 90 kW maximum. The eDeliver 3's 52.5 kWh battery can reach up to 90 kW on DC, but the actual speed depends on temperature, state of charge, and the charger. As a less common brand in Europe, the eDeliver 3 may also encounter occasional charger compatibility quirks. Here is what to check.

Symptoms

• DC fast charging speed well below the 90 kW maximum
• AC charging stuck at about 3 kW instead of the 7 kW maximum
• Charging speed drops sharply after reaching 50-60% on the dashboard
• Charging starts at a reasonable speed but slows down within minutes
• Charger display shows lower power than its rated output

What to Do

1. 1

   Check the battery temperature

   Look at the dashboard for battery temperature information. If the battery is cold, driving for 20-30 minutes before charging can help. The eDeliver 3 lacks preconditioning, so the battery warms up only through driving.

2. 2

   Check your state of charge

   Look at the battery percentage on the dashboard. If you are above 80%, the slower speed is normal. Arrive between 10-20% for the fastest DC charging speeds.

3. 3

   Verify the charger is not sharing power

   Look at the charger. If there are two cables and someone is using the other one, you may be sharing power. Move to an unoccupied charger if one is available.

4. 4

   Try a different charger brand

   If speeds are consistently low at one type of charger, try a different brand or network. The eDeliver 3 may work better with some charger manufacturers than others due to its less common charging firmware.

5. 5

   Check for vehicle software updates

   Contact your Maxus dealer or check the Maxus app for available software updates. Updates can improve charging compatibility and speeds. The Maxus service network is smaller, so this may require scheduling ahead.

6. 6

   Accept the AC limitation

   If your depot wallbox delivers 7 kW or less, you are already at the eDeliver 3's maximum AC rate. A 3-phase 11 kW or 22 kW wallbox will not charge faster than 7 kW on this van. Plan overnight charging accordingly.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.