Mercedes eVito Charging at Iberdrola

Mercedes eVito Van Charger Will Not Start a Session

You have connected the charger to your Mercedes eVito and nothing is happening. No session, no power, no charging light. When you are between jobs or trying to charge at the depot, you need this resolved quickly. Here is how.

Symptoms

• CCS2 or Type 2 connector is plugged in but no session starts
• The MBUX display does not show charging activity
• The charger screen shows an error after plug-in
• The charge port indicator stays off or flashes amber
• The depot wallbox status light does not change when plugged in

What to Do

1. 1

   Authenticate before plugging in

   At public chargers, tap your RFID card or start the session in the app before inserting the connector. Wait for the charger to confirm it is ready.

2. 2

   Clean and reinsert the connector

   Remove the connector, wipe the charge port on the eVito with a dry cloth to remove any dirt, then reinsert the connector firmly until it clicks.

3. 3

   Check MBUX charging settings

   On the MBUX display, navigate to the charging menu. Check if departure time charging is active. Disable it for immediate charging.

4. 4

   Check the depot electrical panel

   If at the depot, check the circuit breaker for the charging circuit. Also check the wallbox status indicator. Report issues to your fleet manager.

5. 5

   Lock and unlock the van

   Use the key to lock the eVito, wait 20 seconds, then unlock. This can reset the charging electronics after a fault state.

6. 6

   Move to a different charger

   If the charger is faulty, do not waste time. Move to another unit or station, especially if you are mid-route.

Mercedes eVito Van Payment Failed at Charging Station

You are at a public charger with your Mercedes eVito and the payment will not go through. Whether it is a fleet card, personal RFID, or an app, payment failures at public chargers waste time between jobs. Here is how to resolve it fast.

Symptoms

• Fleet card does not start a session at the charger
• RFID card tap produces no response
• Charging app shows a payment authorization error
• Contactless bank card is declined
• Charger shows 'payment failed' on the screen

What to Do

1. 1

   Check accepted payment methods

   Look at the charger stickers and screen for accepted networks and cards. If your fleet card logo is not shown, this charger is not on your network.

2. 2

   Try a different payment method

   Switch between fleet card, personal RFID, charging app, and contactless bank card. One may work where others fail.

3. 3

   Verify fleet card status

   Contact your fleet manager or check the fleet card provider app to confirm the card is active and has not hit a spending limit.

4. 4

   Hold the card steadily

   Place the card flat against the reader for 3 seconds. Do not tap and pull away quickly. Gloves can interfere with NFC reading.

5. 5

   Cancel and retry

   Cancel any pending session in the app, wait 60 seconds, and start a fresh attempt.

6. 6

   Move to another charger unit

   If the payment reader on this unit is broken, try the next charger at the station. Do not waste time troubleshooting hardware you cannot fix.

Mercedes eVito Van Charging Slower Than Expected Speed

Your Mercedes eVito is charging slower than the 110 kW DC maximum. Or your depot wallbox is barely delivering power overnight. Without battery preconditioning, the eVito is especially sensitive to cold weather. Here is what to check and how to improve your charging speed.

Symptoms

• DC fast charging well below the 110 kW maximum
• Depot AC charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops quickly after 40-50% state of charge
• Winter charging starts extremely slowly
• Mid-route DC charging takes too long between jobs

What to Do

1. 1

   Drive before charging in cold weather

   Since the eVito lacks preconditioning, drive for at least 20-30 minutes before stopping at a DC charger in winter. This warms the battery through use.

2. 2

   Charge between 20-50% for fastest speeds

   Plan your mid-route charging stops to arrive between 20-50% state of charge. This is where the eVito can approach its 110 kW peak.

3. 3

   Check your depot charger wiring

   Ask your fleet manager or electrician to verify the depot wallbox is wired for three-phase at 16A per phase for 11 kW. Single-phase installations are common but much slower.

4. 4

   Choose unshared DC chargers

   At public stations, check if the charger is sharing power. If another vehicle is on the paired connector, try a different unit.

5. 5

   Use MBUX to check charging status

   The MBUX infotainment system shows current charging power and estimated time. Use this to verify speeds and decide if you should move to a different charger.

6. 6

   Try a different charger

   If speeds remain well below expected at a low state of charge, the charger may be faulty. Move to another unit.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.