Mercedes eSprinter Charging at Iberdrola

Mercedes eSprinter Van Charger Will Not Start Session

You have plugged in your Mercedes eSprinter and nothing is happening. Whether at the depot or a public charger mid-route, a session that will not start is a problem. The eSprinter uses standard CCS2 and Type 2 connectors, so the issue is usually authentication, settings, or the charger itself.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging session starts
• MBUX does not show any charging activity
• The charger screen shows an error after plug-in
• The charge port indicator does not light up
• Depot wallbox shows no activity when the eSprinter is connected

What to Do

1. 1

   Authenticate with the charger

   At public stations, tap your RFID or fleet card, or use the charging app before plugging in. Wait for the charger screen to confirm the session is starting.

2. 2

   Firmly reinsert the connector

   Remove the connector, check the charge port for dirt or debris, then reinsert it firmly until you hear the locking click.

3. 3

   Disable departure time charging

   In MBUX, go to the charging settings and turn off any departure time or scheduled charging. This allows immediate charging when you plug in.

4. 4

   Check depot charging queue

   If at the depot, check with your fleet manager whether load management is queuing your van. Some systems show queue status on the wallbox display.

5. 5

   Lock and unlock the eSprinter

   Lock the van with the key, wait 20 seconds, then unlock. This resets the charging system and can clear fault states.

6. 6

   Try a different charger

   If the charger cannot negotiate with the eSprinter's LFP battery system, try a newer or higher-rated charger. Some older 50 kW chargers have compatibility issues.

Mercedes eSprinter Van Payment Failed at the Charger

You are at a public charger with your Mercedes eSprinter and the payment is not going through. With a large van and a delivery schedule to keep, payment problems are the last thing you need. Here is how to resolve it quickly and get back on the road.

Symptoms

• Fleet charging card is declined at the charger
• RFID card does not register when tapped
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• The charger screen shows an error and will not start the session

What to Do

1. 1

   Check which payments the charger accepts

   Read the stickers and screen on the charger. If your fleet card logo is not shown, the charger is not on your network.

2. 2

   Try an alternative payment method

   Use a personal RFID card, a different charging app, or a contactless bank card. Keep the receipt for reimbursement from your company.

3. 3

   Check fleet card status

   Contact your fleet manager or the card provider to verify the card is active and has not exceeded its spending limit.

4. 4

   Hold the card steadily for 3 seconds

   Place the card flat on the reader without moving. Remove gloves if wearing them. Some readers need a full 3-second contact to register.

5. 5

   Cancel any stuck sessions

   If a previous payment attempt is stuck, cancel it in the app and wait a minute before trying again.

6. 6

   Move to a different charger

   If the payment terminal is broken, try the next unit. Do not waste delivery time on a faulty card reader.

Mercedes eSprinter Van Charging Slower Than Expected

Your Mercedes eSprinter has a large 113 kWh LFP battery, which means charging sessions take longer than smaller vans even at peak speed. But if you are seeing speeds well below 115 kW on DC, something else is going on. Here is what to check.

Symptoms

• DC fast charging well below the 115 kW maximum
• Depot AC charging is slow with the large 113 kWh battery
• Charging speed drops sharply after 50-60% state of charge
• Cold weather charging starts at very low power
• A full DC charge takes significantly longer than expected

What to Do

1. 1

   Use navigation to precondition the battery

   Set the DC charger as your destination in the MBUX navigation. The eSprinter will precondition the LFP battery to the ideal temperature, which is critical for fast charging, especially in cold weather.

2. 2

   Plan charging stops for low state of charge

   Charge between 10-60% for the fastest DC speeds. With the LFP battery, you can safely charge to 100% daily without degradation concerns, but the last 20% will be slow.

3. 3

   Use high-power chargers

   Choose chargers rated 150 kW or higher to ensure the eSprinter can reach its 115 kW peak. On a 50 kW charger, a 113 kWh battery takes a very long time.

4. 4

   Upgrade depot chargers if needed

   For a 113 kWh battery, 11 kW three-phase AC is the minimum for reliable overnight charging. If your depot has single-phase or 7 kW chargers, discuss an upgrade with your fleet manager.

5. 5

   Avoid shared charger stalls

   At public stations, choose a charger where both connectors are free. With the eSprinter's large battery, shared power extends charging significantly.

6. 6

   Try a different charger

   If speeds are well below 80-90 kW at a low state of charge with a warm battery, the charger may be faulty. Try another unit.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.