Mercedes eSprinter Charging at Fastned

Mercedes eSprinter Van Charger Will Not Start Session

You have plugged in your Mercedes eSprinter and nothing is happening. Whether at the depot or a public charger mid-route, a session that will not start is a problem. The eSprinter uses standard CCS2 and Type 2 connectors, so the issue is usually authentication, settings, or the charger itself.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging session starts
• MBUX does not show any charging activity
• The charger screen shows an error after plug-in
• The charge port indicator does not light up
• Depot wallbox shows no activity when the eSprinter is connected

What to Do

1. 1

   Authenticate with the charger

   At public stations, tap your RFID or fleet card, or use the charging app before plugging in. Wait for the charger screen to confirm the session is starting.

2. 2

   Firmly reinsert the connector

   Remove the connector, check the charge port for dirt or debris, then reinsert it firmly until you hear the locking click.

3. 3

   Disable departure time charging

   In MBUX, go to the charging settings and turn off any departure time or scheduled charging. This allows immediate charging when you plug in.

4. 4

   Check depot charging queue

   If at the depot, check with your fleet manager whether load management is queuing your van. Some systems show queue status on the wallbox display.

5. 5

   Lock and unlock the eSprinter

   Lock the van with the key, wait 20 seconds, then unlock. This resets the charging system and can clear fault states.

6. 6

   Try a different charger

   If the charger cannot negotiate with the eSprinter's LFP battery system, try a newer or higher-rated charger. Some older 50 kW chargers have compatibility issues.

Mercedes eSprinter Van Payment Failed at the Charger

You are at a public charger with your Mercedes eSprinter and the payment is not going through. With a large van and a delivery schedule to keep, payment problems are the last thing you need. Here is how to resolve it quickly and get back on the road.

Symptoms

• Fleet charging card is declined at the charger
• RFID card does not register when tapped
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• The charger screen shows an error and will not start the session

What to Do

1. 1

   Check which payments the charger accepts

   Read the stickers and screen on the charger. If your fleet card logo is not shown, the charger is not on your network.

2. 2

   Try an alternative payment method

   Use a personal RFID card, a different charging app, or a contactless bank card. Keep the receipt for reimbursement from your company.

3. 3

   Check fleet card status

   Contact your fleet manager or the card provider to verify the card is active and has not exceeded its spending limit.

4. 4

   Hold the card steadily for 3 seconds

   Place the card flat on the reader without moving. Remove gloves if wearing them. Some readers need a full 3-second contact to register.

5. 5

   Cancel any stuck sessions

   If a previous payment attempt is stuck, cancel it in the app and wait a minute before trying again.

6. 6

   Move to a different charger

   If the payment terminal is broken, try the next unit. Do not waste delivery time on a faulty card reader.

Mercedes eSprinter Van Charging Slower Than Expected

Your Mercedes eSprinter has a large 113 kWh LFP battery, which means charging sessions take longer than smaller vans even at peak speed. But if you are seeing speeds well below 115 kW on DC, something else is going on. Here is what to check.

Symptoms

• DC fast charging well below the 115 kW maximum
• Depot AC charging is slow with the large 113 kWh battery
• Charging speed drops sharply after 50-60% state of charge
• Cold weather charging starts at very low power
• A full DC charge takes significantly longer than expected

What to Do

1. 1

   Use navigation to precondition the battery

   Set the DC charger as your destination in the MBUX navigation. The eSprinter will precondition the LFP battery to the ideal temperature, which is critical for fast charging, especially in cold weather.

2. 2

   Plan charging stops for low state of charge

   Charge between 10-60% for the fastest DC speeds. With the LFP battery, you can safely charge to 100% daily without degradation concerns, but the last 20% will be slow.

3. 3

   Use high-power chargers

   Choose chargers rated 150 kW or higher to ensure the eSprinter can reach its 115 kW peak. On a 50 kW charger, a 113 kWh battery takes a very long time.

4. 4

   Upgrade depot chargers if needed

   For a 113 kWh battery, 11 kW three-phase AC is the minimum for reliable overnight charging. If your depot has single-phase or 7 kW chargers, discuss an upgrade with your fleet manager.

5. 5

   Avoid shared charger stalls

   At public stations, choose a charger where both connectors are free. With the eSprinter's large battery, shared power extends charging significantly.

6. 6

   Try a different charger

   If speeds are well below 80-90 kW at a low state of charge with a warm battery, the charger may be faulty. Try another unit.

Autocharge not recognizing your vehicle

You have Autocharge set up in the Fastned app, but when you plug in, the charger asks for payment instead of starting automatically.

Symptoms

• Charger screen prompts for app or card payment after plugging in
• Screen shows 'Vehicle not recognized' or goes straight to the payment screen
• Autocharge worked at other Fastned stations but not this one
• You recently changed your vehicle or payment method in the Fastned app

How to Fix It

1. 1

   Check Autocharge status in the Fastned app

   Open the Fastned app, go to your account or Autocharge settings, and verify that Autocharge is toggled on and linked to your current vehicle. If you switched vehicles recently, you may need to re-register the new one.

2. 2

   Unplug, wait 15 seconds, and plug in again

   The Autocharge handshake happens in the first few seconds. If the timing was off or the connector was not fully seated, the charger defaults to manual payment. Try again with a firm, steady plug-in.

3. 3

   Make sure your payment method is valid

   Autocharge bills your saved payment method automatically. If the card on file has expired or been blocked, Autocharge will fail even though your vehicle is recognized. Update your payment details in the Fastned app.

4. 4

   Verify your vehicle supports Autocharge

   Autocharge requires the vehicle to transmit a unique identifier through the charging cable (MAC address). Most newer EVs support this, but some older models or specific firmware versions do not. Check Fastned's website for a compatibility list.

5. 5

   Start the session via the app as a workaround

   If Autocharge is not cooperating, open the Fastned app, select the station and charger, and start the session manually. You will still get your Gold Member or regular pricing.

Contactless card reader not responding

You tap your debit or credit card on the contactless reader, but nothing happens. No beep, no screen change, no error.

Symptoms

• No response from the reader when tapping a card
• Reader beeps but the screen shows 'Transaction failed'
• Card works at shops and other chargers but not at this Fastned station
• Apple Pay or Google Pay does not trigger the reader

How to Fix It

1. 1

   Locate the correct reader

   Fastned chargers have the contactless reader built into the charger unit. It is usually a small pad with the contactless symbol near the screen. Make sure you are tapping on the reader, not on the screen itself.

2. 2

   Hold your card still for 3 to 5 seconds

   Do not tap and remove quickly. Hold the card flat against the reader and wait. Some readers are slower than retail terminals.

3. 3

   Remove your card from its wallet or phone case

   Other cards, RFID badges, or phone cases with magnets can interfere with the contactless signal. Try the card on its own, directly on the reader.

4. 4

   Try a different card

   Some card issuers block pre-authorization transactions above a certain threshold. Fastned may pre-authorize 100 EUR or more. If your card's contactless limit is lower, the transaction fails.

5. 5

   Use the Fastned app instead

   If the contactless reader is faulty, start the session through the Fastned app. You can also use a roaming RFID card from providers like Shell Recharge or Chargemap.

Charger cable too short for your vehicle

The charging cable attached to the Fastned station does not reach your vehicle's charge port. This depends on your vehicle's port position and how you park.

Symptoms

• Cable reaches the port but is stretched tight with no slack
• Cable does not reach at all when parked normally
• You need to reverse in or park at an awkward angle
• Cable reaches but the connector presses against the car body at a sharp angle

How to Fix It

1. 1

   Reposition your vehicle

   Try parking closer to the charger or at a different angle. If your charge port is on the front left, back in so the port is closest to the cable. Many Fastned stations are designed for pull-through parking.

2. 2

   Try the other cable

   Fastned chargers typically have two cables (CCS2 and CHAdeMO, or two CCS2 cables from different sides). The cable on the other side of the charger may reach more easily.

3. 3

   Try a different charger at the same station

   If the station has multiple charger units, another one may give you a better angle. Charger positions vary slightly across units.

4. 4

   Do not force a stretched cable

   A cable under tension can damage the connector, your charge port, or the cable itself. If it does not reach comfortably, reposition the car. A damaged connector can shut down the charger for everyone.

Speed throttling when multiple vehicles are charging

Your charging speed drops when other vehicles start charging at the same Fastned station. This is power sharing in action.

Symptoms

• Charging started at 150 kW and dropped to 80 kW when another car plugged in
• Speed is lower at a busy station than at the same station when it was empty
• Dashboard shows the charger is limiting power, not the battery
• Speed fluctuates as other vehicles arrive and leave

How to Fix It

1. 1

   Understand how Fastned power sharing works

   Most Fastned stations have a total power budget shared across all active chargers. When more vehicles charge simultaneously, each one gets a smaller share. This is a station design limitation, not a fault.

2. 2

   Charge during off-peak hours if possible

   Fastned stations along highways are busiest during weekend travel peaks and holiday periods. Early morning or late evening sessions often mean you have the station to yourself and get full speed.

3. 3

   Choose a station with more capacity

   Newer Fastned stations and recently upgraded locations tend to have larger power budgets. The Fastned app shows the maximum kW per station. Stations rated at 400 kW per charger usually have more headroom than 150 kW stations.

4. 4

   Do not wait for full speed. Charge what you need and go.

   Even at reduced speed, DC fast charging is much faster than AC. If you are getting 80 kW instead of 150 kW, it takes a few extra minutes, not hours. Charge to 80% and continue your trip.

Busy station with no queue management

You arrive at a Fastned station and all chargers are occupied. There is no official way to join a queue or reserve a spot.

Symptoms

• All chargers are in use and multiple cars are waiting
• No clear queue order. Confusion about who arrived first.
• App does not show how many vehicles are waiting
• You are not sure if you should wait or drive to another station

How to Fix It

1. 1

   Check the Fastned app for nearby alternatives

   Before committing to a wait, check if there is another Fastned station or competitor fast charger within 10 to 15 minutes. Waiting 20 minutes for a spot is often slower than driving to a nearby empty station.

2. 2

   Communicate with other waiting drivers

   Fastned does not have a formal queue system. If you decide to wait, make yourself visible by parking near the charger area and, if comfortable, let other waiting drivers know you are in line. Brief eye contact and a nod go a long way.

3. 3

   Watch for vehicles at high state of charge

   If a vehicle on the charger is already above 80%, it will likely leave soon. Drivers charging from 80 to 100% at a DC fast charger are rare. Most will unplug and leave within minutes.

4. 4

   Plan stops to avoid peak times

   Holiday weekends, Friday afternoons, and Sunday evenings are the busiest. If your schedule is flexible, adjusting departure time by an hour or two can make a significant difference in charger availability.

5. 5

   Send feedback to Fastned

   Fastned expands stations based on utilization data. If a station is consistently full, reporting it through the app helps Fastned prioritize adding more chargers at that location.