Volvo EX90 Charging at Neste

Volvo EX90 Plugged In but the Charger Will Not Start

You connected the cable to your Volvo EX90 and nothing happens. No charging indicator on the screen, no confirmation from the charger. The EX90 supports Plug & Charge and multiple authentication methods, but when none of them work, you need to troubleshoot step by step.

Symptoms

• Charger displays an error after plugging in the EX90
• Charge port LED does not light up or stays amber
• 14.5-inch center screen shows no active charging session
• Charger screen says 'waiting for vehicle' or shows a timeout
• CCS connector plugs in but does not lock into the charge port

What to Do

1. 1

   Authenticate with the charger

   Check the charger's screen for payment instructions. Tap your RFID card, open the charging network's app, or use contactless payment. Plug & Charge should activate automatically on supported networks, but if it does not, use manual authentication.

2. 2

   Check the charge port on the left rear

   Open the charge port door fully. Check for ice, snow, or debris. In winter, gently clear any obstructions. Make sure the port cover is not partially blocking the connector.

3. 3

   Seat the connector firmly

   Push the CCS2 connector straight into the port until it clicks and locks. If it will not lock, pull it out and try again. Check that the connector pins are clean and undamaged.

4. 4

   Turn off scheduled charging

   On the center screen, go to Settings, then Charging. If a charging schedule is active, disable it or switch to 'charge immediately.' This is a common reason charging will not start at public chargers.

5. 5

   Restart the charging process

   Unplug the connector, lock and unlock the car using the Volvo Cars app or key, wait 15 seconds, then plug in again. This resets the charging communication.

Volvo EX90 Charger Payment Failed or Card Declined

You are at a public charger with your Volvo EX90 and the payment will not go through. The card reader rejects your card, the app throws an error, or Plug & Charge just does not activate. Payment issues at public chargers are one of the most common frustrations, and they have nothing to do with your car's charging system.

Symptoms

• Charger screen shows 'payment failed' or 'card declined'
• Plug & Charge does not activate when you connect the cable
• Charging app shows a payment error or insufficient balance
• Contactless payment terminal does not respond
• You cannot find any way to pay at the charger

What to Do

1. 1

   Check Plug & Charge status in the Volvo Cars app

   Open the Volvo Cars app and verify that Plug & Charge is enabled with a valid payment method. If the network supports it, try unplugging and reconnecting. If not, proceed to manual payment.

2. 2

   Try a different payment method

   Use a different credit or debit card, your phone's mobile wallet, or the charging network's app. Having multiple options avoids being stuck when one fails.

3. 3

   Check for pre-authorization holds

   Open your banking app and look for pending charges from the charging network. Multiple failed attempts may have placed several holds, reducing your available balance. Contact your bank if needed.

4. 4

   Use the charging network's app instead

   Find the network name on the charger. Download their app, create an account, add a payment method, and start the session through the app. This bypasses the physical payment terminal entirely.

5. 5

   Tap your RFID charging card

   If you carry an RFID card from a charging provider or roaming service, tap it on the charger's card reader. RFID cards are often more reliable than apps or contactless terminals.

Volvo EX90 Charging Slower Than Expected at DC or AC

You plugged in your Volvo EX90 expecting 250 kW and the 14.5-inch screen shows 60 kW. Or your wallbox is only delivering 3 kW instead of 11 kW. The EX90 has one of the fastest charging speeds in its class, but reaching that peak depends on battery temperature, state of charge, and the charger itself.

Symptoms

• DC fast charging speed well below the 250 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 40-50%
• Center screen shows lower power than the charger's rated output
• Charging session starts strong but slows down within 10 minutes

What to Do

1. 1

   Set the charger as your navigation destination

   Use Google Maps on the 14.5-inch center screen to navigate to the charging station. The EX90 will start preconditioning the battery automatically during the drive, preparing it for peak charging speed.

2. 2

   Check the charger's rated power

   Before plugging in, check the charger's label or the app for its maximum output. If the charger is rated at 150 kW, your EX90 cannot charge faster than 150 kW regardless of its 250 kW capability.

3. 3

   Check your state of charge

   For the fastest charging, arrive between 10-20%. The EX90's peak speeds are available at lower states of charge. Above 80%, charging will slow significantly.

4. 4

   Verify the charger is not sharing power

   Many chargers split power between two connectors. If someone is using the adjacent stall, both cars get reduced speeds. Move to a charger with both stalls free.

5. 5

   Check AC charge current settings

   If charging slowly on AC, check the EX90's settings to ensure the charge current limiter is set to maximum. Also verify your wallbox is properly wired for 3-phase.

6. 6

   Try a higher-powered charger

   To take advantage of the EX90's 250 kW capability, look for chargers rated at 300 kW or higher. These are available from networks like Ionity, Fastned, and others.

Confusing fuel station layout

Neste EV chargers are located at fuel stations alongside petrol and diesel pumps. First-time visitors often struggle to find the charger or accidentally drive to the fuel pump area instead.

Symptoms

• You drove into the fuel pump lane instead of the EV charging area
• The EV charger is around the back or side of the station, not visible from the entrance
• Signage for EV charging is missing or hard to see among fuel station branding
• You pulled up to what you thought was a charger but it is a compressed natural gas (CNG) pump

How to Fix It

1. 1

   Look for dedicated EV signage before pulling in

   Neste EV chargers are usually in a separate area from the fuel pumps, often to the side or behind the main station building. Look for green EV charging signs or CCS2 connector symbols.

2. 2

   Check the Neste app for a station map

   Some Neste station listings in the app include a layout or photo showing where the EV chargers are located relative to the fuel pumps. Check this before you arrive.

3. 3

   Drive past the fuel pump area

   If you do not see the charger immediately, continue driving past the fuel pumps. EV chargers at fuel stations are often placed at the edge of the property or near truck parking areas.

4. 4

   Ask the station staff

   Neste station staff can point you to the EV charging area. The indoor counter staff deal with this question regularly.

Neste app charging section is hard to find

The Neste app is primarily designed for fuel customers, loyalty programs, and car wash services. The EV charging feature can be buried in the navigation.

Symptoms

• You downloaded the Neste app but cannot find where to start an EV charging session
• The app homepage shows fuel prices and loyalty points but no obvious EV charging option
• You found a charger map but tapping on a station does not show a 'Start charging' button
• The app keeps directing you to fuel-related features instead of EV charging

How to Fix It

1. 1

   Look for a 'Charging' or 'EV' tab in the app

   Neste has been adding EV features gradually. The charging section may be under a dedicated tab, in the station details, or under a services menu. It is not always on the home screen.

2. 2

   Search for the specific station in the app

   Use the station finder and select the station you are at. The station details page should show whether EV charging is available and give you the option to start a session.

3. 3

   Use an alternative payment method

   If the app is frustrating, use contactless card payment or an RFID card directly at the charger. You do not need the Neste app to charge. The charger works independently.

4. 4

   Check if a third-party app has roaming access

   Neste chargers may be available through roaming networks. Apps like Virta, Plugsurfing, or Shell Recharge might offer access to Neste stations without using the Neste app at all.

RFID card works at fuel pumps but not at the charger

Your Neste loyalty card or fuel RFID card works for paying at the fuel pump but the EV charger does not recognize it. The fuel and EV charging systems use different authentication.

Symptoms

• Neste loyalty card tapped at the EV charger shows 'Card not recognized'
• Fuel RFID works at the pump but does nothing at the charger
• You assumed the same card works for everything at the Neste station
• Staff at the counter say the card should work but it does not

How to Fix It

1. 1

   Understand that fuel and EV charging use separate systems

   Neste's fuel payment infrastructure and EV charging infrastructure are different platforms. A card that authenticates at the pump may not be registered for EV charging.

2. 2

   Check which RFID cards the charger accepts

   Look at the charger screen or signage for logos of accepted charging networks. The charger may accept cards from Virta, Hubject partners, or other EV roaming networks, but not the Neste fuel loyalty card.

3. 3

   Use contactless bank card payment

   If your RFID card is not accepted, tap your debit or credit card on the contactless reader. This works independently of any loyalty program.

4. 4

   Register for EV charging in the Neste app

   If you want to use the Neste ecosystem for EV charging, you may need to activate EV charging as a separate service in your Neste account or app. This links your account to the charging platform.

Charger occupied during commute hours

Neste stations along commuter routes get heavy EV charging traffic during morning and evening rush hours. This is especially common at stations near highways and main roads.

Symptoms

• All chargers occupied when you arrive during morning or evening commute
• App shows the station as available but all stalls are in use when you get there
• Waiting 20+ minutes for a stall to free up
• Cars queued informally with no clear system for who is next

How to Fix It

1. 1

   Check real-time availability before driving to the station

   Use the Neste app or a third-party app to see how many stalls are currently free. Status may lag by a few minutes, so treat it as approximate.

2. 2

   Have a backup station in mind

   Before heading to a Neste station during peak hours, identify one or two alternatives within 10 to 15 minutes. Another Neste station, a competitor, or a supermarket charger nearby.

3. 3

   Shift your charging to off-peak if possible

   Charging at 06:00 or 21:00 instead of 08:00 or 17:30 dramatically reduces wait times at commuter-route stations.

4. 4

   Do not wait indefinitely

   If all stalls are occupied and there are cars waiting ahead of you, the math may not work. Two cars at 30 minutes each means an hour of waiting. Drive to the next available station instead.

Contactless payment has a minimum charge amount

Some Neste EV chargers require a minimum charge amount for contactless bank card transactions. If you only need a few kWh, the payment terminal may reject the transaction or apply a minimum fee.

Symptoms

• Contactless payment rejected with 'Below minimum amount' message
• You only wanted a quick top-up but the charger requires a minimum session value
• Pre-authorization hold is larger than the amount of energy you plan to use
• You are charged a minimum fee even for a very short session

How to Fix It

1. 1

   Check the minimum transaction amount on the charger screen

   The charger should display the minimum charge before you tap your card. This is typically 1 to 5 EUR depending on the payment processor.

2. 2

   Use an RFID card or app instead

   RFID cards and app-based sessions often do not have minimum transaction requirements. You pay only for the energy you use, even for short sessions.

3. 3

   Charge a bit longer to meet the minimum

   If you are just below the minimum, adding a few more kWh brings you above the threshold and you avoid any issues with the payment processor.

4. 4

   Understand the pre-authorization hold

   Contactless payments pre-authorize a fixed amount (often 50 to 100 EUR). The actual charge is calculated after the session ends. The difference between the hold and the actual charge is released back to your account within a few business days.