Volvo EX90 Charging at Fastned

Volvo EX90 Plugged In but the Charger Will Not Start

You connected the cable to your Volvo EX90 and nothing happens. No charging indicator on the screen, no confirmation from the charger. The EX90 supports Plug & Charge and multiple authentication methods, but when none of them work, you need to troubleshoot step by step.

Symptoms

• Charger displays an error after plugging in the EX90
• Charge port LED does not light up or stays amber
• 14.5-inch center screen shows no active charging session
• Charger screen says 'waiting for vehicle' or shows a timeout
• CCS connector plugs in but does not lock into the charge port

What to Do

1. 1

   Authenticate with the charger

   Check the charger's screen for payment instructions. Tap your RFID card, open the charging network's app, or use contactless payment. Plug & Charge should activate automatically on supported networks, but if it does not, use manual authentication.

2. 2

   Check the charge port on the left rear

   Open the charge port door fully. Check for ice, snow, or debris. In winter, gently clear any obstructions. Make sure the port cover is not partially blocking the connector.

3. 3

   Seat the connector firmly

   Push the CCS2 connector straight into the port until it clicks and locks. If it will not lock, pull it out and try again. Check that the connector pins are clean and undamaged.

4. 4

   Turn off scheduled charging

   On the center screen, go to Settings, then Charging. If a charging schedule is active, disable it or switch to 'charge immediately.' This is a common reason charging will not start at public chargers.

5. 5

   Restart the charging process

   Unplug the connector, lock and unlock the car using the Volvo Cars app or key, wait 15 seconds, then plug in again. This resets the charging communication.

Volvo EX90 Charger Payment Failed or Card Declined

You are at a public charger with your Volvo EX90 and the payment will not go through. The card reader rejects your card, the app throws an error, or Plug & Charge just does not activate. Payment issues at public chargers are one of the most common frustrations, and they have nothing to do with your car's charging system.

Symptoms

• Charger screen shows 'payment failed' or 'card declined'
• Plug & Charge does not activate when you connect the cable
• Charging app shows a payment error or insufficient balance
• Contactless payment terminal does not respond
• You cannot find any way to pay at the charger

What to Do

1. 1

   Check Plug & Charge status in the Volvo Cars app

   Open the Volvo Cars app and verify that Plug & Charge is enabled with a valid payment method. If the network supports it, try unplugging and reconnecting. If not, proceed to manual payment.

2. 2

   Try a different payment method

   Use a different credit or debit card, your phone's mobile wallet, or the charging network's app. Having multiple options avoids being stuck when one fails.

3. 3

   Check for pre-authorization holds

   Open your banking app and look for pending charges from the charging network. Multiple failed attempts may have placed several holds, reducing your available balance. Contact your bank if needed.

4. 4

   Use the charging network's app instead

   Find the network name on the charger. Download their app, create an account, add a payment method, and start the session through the app. This bypasses the physical payment terminal entirely.

5. 5

   Tap your RFID charging card

   If you carry an RFID card from a charging provider or roaming service, tap it on the charger's card reader. RFID cards are often more reliable than apps or contactless terminals.

Volvo EX90 Charging Slower Than Expected at DC or AC

You plugged in your Volvo EX90 expecting 250 kW and the 14.5-inch screen shows 60 kW. Or your wallbox is only delivering 3 kW instead of 11 kW. The EX90 has one of the fastest charging speeds in its class, but reaching that peak depends on battery temperature, state of charge, and the charger itself.

Symptoms

• DC fast charging speed well below the 250 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 40-50%
• Center screen shows lower power than the charger's rated output
• Charging session starts strong but slows down within 10 minutes

What to Do

1. 1

   Set the charger as your navigation destination

   Use Google Maps on the 14.5-inch center screen to navigate to the charging station. The EX90 will start preconditioning the battery automatically during the drive, preparing it for peak charging speed.

2. 2

   Check the charger's rated power

   Before plugging in, check the charger's label or the app for its maximum output. If the charger is rated at 150 kW, your EX90 cannot charge faster than 150 kW regardless of its 250 kW capability.

3. 3

   Check your state of charge

   For the fastest charging, arrive between 10-20%. The EX90's peak speeds are available at lower states of charge. Above 80%, charging will slow significantly.

4. 4

   Verify the charger is not sharing power

   Many chargers split power between two connectors. If someone is using the adjacent stall, both cars get reduced speeds. Move to a charger with both stalls free.

5. 5

   Check AC charge current settings

   If charging slowly on AC, check the EX90's settings to ensure the charge current limiter is set to maximum. Also verify your wallbox is properly wired for 3-phase.

6. 6

   Try a higher-powered charger

   To take advantage of the EX90's 250 kW capability, look for chargers rated at 300 kW or higher. These are available from networks like Ionity, Fastned, and others.

Autocharge not recognizing your vehicle

You have Autocharge set up in the Fastned app, but when you plug in, the charger asks for payment instead of starting automatically.

Symptoms

• Charger screen prompts for app or card payment after plugging in
• Screen shows 'Vehicle not recognized' or goes straight to the payment screen
• Autocharge worked at other Fastned stations but not this one
• You recently changed your vehicle or payment method in the Fastned app

How to Fix It

1. 1

   Check Autocharge status in the Fastned app

   Open the Fastned app, go to your account or Autocharge settings, and verify that Autocharge is toggled on and linked to your current vehicle. If you switched vehicles recently, you may need to re-register the new one.

2. 2

   Unplug, wait 15 seconds, and plug in again

   The Autocharge handshake happens in the first few seconds. If the timing was off or the connector was not fully seated, the charger defaults to manual payment. Try again with a firm, steady plug-in.

3. 3

   Make sure your payment method is valid

   Autocharge bills your saved payment method automatically. If the card on file has expired or been blocked, Autocharge will fail even though your vehicle is recognized. Update your payment details in the Fastned app.

4. 4

   Verify your vehicle supports Autocharge

   Autocharge requires the vehicle to transmit a unique identifier through the charging cable (MAC address). Most newer EVs support this, but some older models or specific firmware versions do not. Check Fastned's website for a compatibility list.

5. 5

   Start the session via the app as a workaround

   If Autocharge is not cooperating, open the Fastned app, select the station and charger, and start the session manually. You will still get your Gold Member or regular pricing.

Contactless card reader not responding

You tap your debit or credit card on the contactless reader, but nothing happens. No beep, no screen change, no error.

Symptoms

• No response from the reader when tapping a card
• Reader beeps but the screen shows 'Transaction failed'
• Card works at shops and other chargers but not at this Fastned station
• Apple Pay or Google Pay does not trigger the reader

How to Fix It

1. 1

   Locate the correct reader

   Fastned chargers have the contactless reader built into the charger unit. It is usually a small pad with the contactless symbol near the screen. Make sure you are tapping on the reader, not on the screen itself.

2. 2

   Hold your card still for 3 to 5 seconds

   Do not tap and remove quickly. Hold the card flat against the reader and wait. Some readers are slower than retail terminals.

3. 3

   Remove your card from its wallet or phone case

   Other cards, RFID badges, or phone cases with magnets can interfere with the contactless signal. Try the card on its own, directly on the reader.

4. 4

   Try a different card

   Some card issuers block pre-authorization transactions above a certain threshold. Fastned may pre-authorize 100 EUR or more. If your card's contactless limit is lower, the transaction fails.

5. 5

   Use the Fastned app instead

   If the contactless reader is faulty, start the session through the Fastned app. You can also use a roaming RFID card from providers like Shell Recharge or Chargemap.

Charger cable too short for your vehicle

The charging cable attached to the Fastned station does not reach your vehicle's charge port. This depends on your vehicle's port position and how you park.

Symptoms

• Cable reaches the port but is stretched tight with no slack
• Cable does not reach at all when parked normally
• You need to reverse in or park at an awkward angle
• Cable reaches but the connector presses against the car body at a sharp angle

How to Fix It

1. 1

   Reposition your vehicle

   Try parking closer to the charger or at a different angle. If your charge port is on the front left, back in so the port is closest to the cable. Many Fastned stations are designed for pull-through parking.

2. 2

   Try the other cable

   Fastned chargers typically have two cables (CCS2 and CHAdeMO, or two CCS2 cables from different sides). The cable on the other side of the charger may reach more easily.

3. 3

   Try a different charger at the same station

   If the station has multiple charger units, another one may give you a better angle. Charger positions vary slightly across units.

4. 4

   Do not force a stretched cable

   A cable under tension can damage the connector, your charge port, or the cable itself. If it does not reach comfortably, reposition the car. A damaged connector can shut down the charger for everyone.

Speed throttling when multiple vehicles are charging

Your charging speed drops when other vehicles start charging at the same Fastned station. This is power sharing in action.

Symptoms

• Charging started at 150 kW and dropped to 80 kW when another car plugged in
• Speed is lower at a busy station than at the same station when it was empty
• Dashboard shows the charger is limiting power, not the battery
• Speed fluctuates as other vehicles arrive and leave

How to Fix It

1. 1

   Understand how Fastned power sharing works

   Most Fastned stations have a total power budget shared across all active chargers. When more vehicles charge simultaneously, each one gets a smaller share. This is a station design limitation, not a fault.

2. 2

   Charge during off-peak hours if possible

   Fastned stations along highways are busiest during weekend travel peaks and holiday periods. Early morning or late evening sessions often mean you have the station to yourself and get full speed.

3. 3

   Choose a station with more capacity

   Newer Fastned stations and recently upgraded locations tend to have larger power budgets. The Fastned app shows the maximum kW per station. Stations rated at 400 kW per charger usually have more headroom than 150 kW stations.

4. 4

   Do not wait for full speed. Charge what you need and go.

   Even at reduced speed, DC fast charging is much faster than AC. If you are getting 80 kW instead of 150 kW, it takes a few extra minutes, not hours. Charge to 80% and continue your trip.

Busy station with no queue management

You arrive at a Fastned station and all chargers are occupied. There is no official way to join a queue or reserve a spot.

Symptoms

• All chargers are in use and multiple cars are waiting
• No clear queue order. Confusion about who arrived first.
• App does not show how many vehicles are waiting
• You are not sure if you should wait or drive to another station

How to Fix It

1. 1

   Check the Fastned app for nearby alternatives

   Before committing to a wait, check if there is another Fastned station or competitor fast charger within 10 to 15 minutes. Waiting 20 minutes for a spot is often slower than driving to a nearby empty station.

2. 2

   Communicate with other waiting drivers

   Fastned does not have a formal queue system. If you decide to wait, make yourself visible by parking near the charger area and, if comfortable, let other waiting drivers know you are in line. Brief eye contact and a nod go a long way.

3. 3

   Watch for vehicles at high state of charge

   If a vehicle on the charger is already above 80%, it will likely leave soon. Drivers charging from 80 to 100% at a DC fast charger are rare. Most will unplug and leave within minutes.

4. 4

   Plan stops to avoid peak times

   Holiday weekends, Friday afternoons, and Sunday evenings are the busiest. If your schedule is flexible, adjusting departure time by an hour or two can make a significant difference in charger availability.

5. 5

   Send feedback to Fastned

   Fastned expands stations based on utilization data. If a station is consistently full, reporting it through the app helps Fastned prioritize adding more chargers at that location.