Volvo EX90 Charging at Le Plein

Volvo EX90 Plugged In but the Charger Will Not Start

You connected the cable to your Volvo EX90 and nothing happens. No charging indicator on the screen, no confirmation from the charger. The EX90 supports Plug & Charge and multiple authentication methods, but when none of them work, you need to troubleshoot step by step.

Symptoms

• Charger displays an error after plugging in the EX90
• Charge port LED does not light up or stays amber
• 14.5-inch center screen shows no active charging session
• Charger screen says 'waiting for vehicle' or shows a timeout
• CCS connector plugs in but does not lock into the charge port

What to Do

1. 1

   Authenticate with the charger

   Check the charger's screen for payment instructions. Tap your RFID card, open the charging network's app, or use contactless payment. Plug & Charge should activate automatically on supported networks, but if it does not, use manual authentication.

2. 2

   Check the charge port on the left rear

   Open the charge port door fully. Check for ice, snow, or debris. In winter, gently clear any obstructions. Make sure the port cover is not partially blocking the connector.

3. 3

   Seat the connector firmly

   Push the CCS2 connector straight into the port until it clicks and locks. If it will not lock, pull it out and try again. Check that the connector pins are clean and undamaged.

4. 4

   Turn off scheduled charging

   On the center screen, go to Settings, then Charging. If a charging schedule is active, disable it or switch to 'charge immediately.' This is a common reason charging will not start at public chargers.

5. 5

   Restart the charging process

   Unplug the connector, lock and unlock the car using the Volvo Cars app or key, wait 15 seconds, then plug in again. This resets the charging communication.

Volvo EX90 Charger Payment Failed or Card Declined

You are at a public charger with your Volvo EX90 and the payment will not go through. The card reader rejects your card, the app throws an error, or Plug & Charge just does not activate. Payment issues at public chargers are one of the most common frustrations, and they have nothing to do with your car's charging system.

Symptoms

• Charger screen shows 'payment failed' or 'card declined'
• Plug & Charge does not activate when you connect the cable
• Charging app shows a payment error or insufficient balance
• Contactless payment terminal does not respond
• You cannot find any way to pay at the charger

What to Do

1. 1

   Check Plug & Charge status in the Volvo Cars app

   Open the Volvo Cars app and verify that Plug & Charge is enabled with a valid payment method. If the network supports it, try unplugging and reconnecting. If not, proceed to manual payment.

2. 2

   Try a different payment method

   Use a different credit or debit card, your phone's mobile wallet, or the charging network's app. Having multiple options avoids being stuck when one fails.

3. 3

   Check for pre-authorization holds

   Open your banking app and look for pending charges from the charging network. Multiple failed attempts may have placed several holds, reducing your available balance. Contact your bank if needed.

4. 4

   Use the charging network's app instead

   Find the network name on the charger. Download their app, create an account, add a payment method, and start the session through the app. This bypasses the physical payment terminal entirely.

5. 5

   Tap your RFID charging card

   If you carry an RFID card from a charging provider or roaming service, tap it on the charger's card reader. RFID cards are often more reliable than apps or contactless terminals.

Volvo EX90 Charging Slower Than Expected at DC or AC

You plugged in your Volvo EX90 expecting 250 kW and the 14.5-inch screen shows 60 kW. Or your wallbox is only delivering 3 kW instead of 11 kW. The EX90 has one of the fastest charging speeds in its class, but reaching that peak depends on battery temperature, state of charge, and the charger itself.

Symptoms

• DC fast charging speed well below the 250 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 40-50%
• Center screen shows lower power than the charger's rated output
• Charging session starts strong but slows down within 10 minutes

What to Do

1. 1

   Set the charger as your navigation destination

   Use Google Maps on the 14.5-inch center screen to navigate to the charging station. The EX90 will start preconditioning the battery automatically during the drive, preparing it for peak charging speed.

2. 2

   Check the charger's rated power

   Before plugging in, check the charger's label or the app for its maximum output. If the charger is rated at 150 kW, your EX90 cannot charge faster than 150 kW regardless of its 250 kW capability.

3. 3

   Check your state of charge

   For the fastest charging, arrive between 10-20%. The EX90's peak speeds are available at lower states of charge. Above 80%, charging will slow significantly.

4. 4

   Verify the charger is not sharing power

   Many chargers split power between two connectors. If someone is using the adjacent stall, both cars get reduced speeds. Move to a charger with both stalls free.

5. 5

   Check AC charge current settings

   If charging slowly on AC, check the EX90's settings to ensure the charge current limiter is set to maximum. Also verify your wallbox is properly wired for 3-phase.

6. 6

   Try a higher-powered charger

   To take advantage of the EX90's 250 kW capability, look for chargers rated at 300 kW or higher. These are available from networks like Ionity, Fastned, and others.

App and charger interface only in French

The Le Plein app and the charger screen interface are primarily in French. If you do not read French, navigating menus and understanding error messages takes extra effort.

Symptoms

• The app menus, buttons, and instructions are entirely in French
• The charger screen shows an error message you cannot read
• You cannot find the 'start session' button because the labels are in French
• Support articles and FAQ in the app are in French only

How to Fix It

1. 1

   Learn the key French charging terms

   A few words go a long way. 'Démarrer' means start, 'Arrêter' means stop, 'Brancher' means plug in, 'En charge' means charging, 'Disponible' means available, 'Hors service' means out of order. With these, you can navigate most screens.

2. 2

   Use your phone's translation feature on the charger screen

   Most smartphones can translate text from a photo. Point your camera at the charger screen and use Google Translate, Apple Translate, or a similar app to read the message. This works well for error messages you do not recognize.

3. 3

   Set up the session flow before you arrive

   Open the Le Plein app at home and familiarize yourself with the session flow: find station, select charger, start session. Once you know where the buttons are, the French labels matter less.

4. 4

   Use your phone's built-in app translation if available

   On Android, you can translate app interfaces using the system translation feature. On iOS, you can take a screenshot and translate it. This helps with menus and settings you need to navigate once.

RFID card ordering process through the app

Le Plein RFID cards can only be ordered through the app. There is no option to buy one at a station or from a retail location. The ordering and activation process has a few steps that can trip people up.

Symptoms

• You want an RFID card but cannot find where to order it
• You ordered a card but it has not arrived after the expected delivery time
• Your RFID card arrived but does not work at the charger
• The app says your card is active but the charger does not recognize it

How to Fix It

1. 1

   Order the card through the Le Plein app account section

   Open the Le Plein app, go to your account or profile settings, and look for an RFID card or badge option. Follow the ordering flow, which will ask for your delivery address. Delivery takes several business days within France.

2. 2

   Activate the card in the app after it arrives

   When the card arrives, you may need to activate it in the Le Plein app by entering the card number or scanning it. Check the instructions that came with the card. An unactivated card will not start a session.

3. 3

   Make sure your payment method is valid

   The RFID card charges sessions to the payment method saved in your Le Plein account. If your saved card has expired or been declined, the RFID card will not work even though it is activated. Update your payment details in the app.

4. 4

   Use the app to start sessions while waiting for the RFID card

   You do not need the physical RFID card to charge. The Le Plein app can start sessions directly. Use the app until your card arrives and is activated.

Station coverage concentrated in certain French regions

Le Plein's network does not cover all of France equally. Some regions have good coverage while others have very few or no stations. This can be a problem on longer trips.

Symptoms

• The app shows no Le Plein stations along a section of your route
• Stations are clustered around certain cities but absent in rural areas between them
• You planned a trip assuming Le Plein coverage and found a gap
• The nearest Le Plein station is far from your destination

How to Fix It

1. 1

   Check Le Plein coverage along your entire route before departing

   Open the Le Plein app and trace your route on the map. Look for gaps where there are no stations for long stretches. Identify these gaps before you leave, not when your battery is low.

2. 2

   Install backup charging apps for other French networks

   France has several other charging networks, including Ionity, TotalEnergies, Fastned, and local operators. Having apps for two or three networks ensures you always have a fallback when Le Plein coverage runs out.

3. 3

   Use a roaming RFID card for multi-network access

   A roaming card from Chargemap or another aggregator can access chargers from multiple French networks. This is especially useful in areas where Le Plein has no presence.

4. 4

   Plan with a multi-network route planner

   A Better Routeplanner (ABRP) or Chargemap show stations from all networks. Enter your vehicle and destination to get charging stops that work regardless of the operator.

Charger screen errors you cannot decipher

When something goes wrong at a Le Plein charger, the error message on the screen is in French. If you do not understand the message, you cannot tell whether to retry or move on.

Symptoms

• The screen shows an error code or message in French after you plug in
• The charger stopped mid-session and the screen displays a French message
• You see 'Hors service' or 'Erreur' but do not know the specific problem
• The screen shows instructions you cannot follow

How to Fix It

1. 1

   Photo-translate the error message

   Take a photo of the screen and use Google Translate's camera feature or Apple Translate to read it. This gives you the specific error, not just a guess.

2. 2

   Know the most common French charger errors

   'Hors service' means out of order, do not wait. 'Erreur de communication' means a communication error between charger and vehicle, try replugging. 'Session en cours' means a session is already active, possibly from a previous user who did not end it. 'Veuillez patienter' means please wait.

3. 3

   Try unplugging and reconnecting

   Many charger errors clear themselves when you unplug, wait 30 seconds, and plug in again. This resets the communication between your vehicle and the charger.

4. 4

   End any stuck session in the Le Plein app

   If the charger thinks a session is still active from a previous user, you may not be able to start a new one. Check the app to see if there is an active session on that charger. Sometimes you need to wait for it to time out.

5. 5

   Move to another charger if the error persists

   If the same error appears after two or three attempts, the charger likely has a hardware or software issue. Try another charger at the same station, or drive to the next Le Plein or alternative station.

Support phone line in French only

Le Plein's support phone line is staffed by French-speaking agents. If you need help at a station and do not speak French, communication can be difficult.

Symptoms

• You called support and the agent speaks only French
• The automated phone menu is in French with no language option
• You cannot explain your problem over the phone
• You need urgent help at a station but cannot communicate effectively

How to Fix It

1. 1

   Try the app's support or help section first

   Written support through the app (email, contact form, or chat) gives you time to use a translation tool. Type your question in English, translate it to French, and paste it. This is often more effective than a phone call.

2. 2

   Prepare a few key phrases in advance

   If you may need to call, have these ready: 'La borne ne fonctionne pas' (the charger is not working), 'Le câble est bloqué' (the cable is stuck), 'J'ai besoin d'aide' (I need help), and the station number or location name.

3. 3

   Use a real-time translation app during the call

   Google Translate's conversation mode can translate speech in both directions. It is not perfect, but it helps bridge the gap. Open it before you call.

4. 4

   Ask a nearby person for help if available

   If you are at a station and someone nearby speaks both French and your language, asking for a quick translation assist is perfectly reasonable. Most people are happy to help.