Volvo EX90 Charging at K-Lataus

Volvo EX90 Plugged In but the Charger Will Not Start

You connected the cable to your Volvo EX90 and nothing happens. No charging indicator on the screen, no confirmation from the charger. The EX90 supports Plug & Charge and multiple authentication methods, but when none of them work, you need to troubleshoot step by step.

Symptoms

• Charger displays an error after plugging in the EX90
• Charge port LED does not light up or stays amber
• 14.5-inch center screen shows no active charging session
• Charger screen says 'waiting for vehicle' or shows a timeout
• CCS connector plugs in but does not lock into the charge port

What to Do

1. 1

   Authenticate with the charger

   Check the charger's screen for payment instructions. Tap your RFID card, open the charging network's app, or use contactless payment. Plug & Charge should activate automatically on supported networks, but if it does not, use manual authentication.

2. 2

   Check the charge port on the left rear

   Open the charge port door fully. Check for ice, snow, or debris. In winter, gently clear any obstructions. Make sure the port cover is not partially blocking the connector.

3. 3

   Seat the connector firmly

   Push the CCS2 connector straight into the port until it clicks and locks. If it will not lock, pull it out and try again. Check that the connector pins are clean and undamaged.

4. 4

   Turn off scheduled charging

   On the center screen, go to Settings, then Charging. If a charging schedule is active, disable it or switch to 'charge immediately.' This is a common reason charging will not start at public chargers.

5. 5

   Restart the charging process

   Unplug the connector, lock and unlock the car using the Volvo Cars app or key, wait 15 seconds, then plug in again. This resets the charging communication.

Volvo EX90 Charger Payment Failed or Card Declined

You are at a public charger with your Volvo EX90 and the payment will not go through. The card reader rejects your card, the app throws an error, or Plug & Charge just does not activate. Payment issues at public chargers are one of the most common frustrations, and they have nothing to do with your car's charging system.

Symptoms

• Charger screen shows 'payment failed' or 'card declined'
• Plug & Charge does not activate when you connect the cable
• Charging app shows a payment error or insufficient balance
• Contactless payment terminal does not respond
• You cannot find any way to pay at the charger

What to Do

1. 1

   Check Plug & Charge status in the Volvo Cars app

   Open the Volvo Cars app and verify that Plug & Charge is enabled with a valid payment method. If the network supports it, try unplugging and reconnecting. If not, proceed to manual payment.

2. 2

   Try a different payment method

   Use a different credit or debit card, your phone's mobile wallet, or the charging network's app. Having multiple options avoids being stuck when one fails.

3. 3

   Check for pre-authorization holds

   Open your banking app and look for pending charges from the charging network. Multiple failed attempts may have placed several holds, reducing your available balance. Contact your bank if needed.

4. 4

   Use the charging network's app instead

   Find the network name on the charger. Download their app, create an account, add a payment method, and start the session through the app. This bypasses the physical payment terminal entirely.

5. 5

   Tap your RFID charging card

   If you carry an RFID card from a charging provider or roaming service, tap it on the charger's card reader. RFID cards are often more reliable than apps or contactless terminals.

Volvo EX90 Charging Slower Than Expected at DC or AC

You plugged in your Volvo EX90 expecting 250 kW and the 14.5-inch screen shows 60 kW. Or your wallbox is only delivering 3 kW instead of 11 kW. The EX90 has one of the fastest charging speeds in its class, but reaching that peak depends on battery temperature, state of charge, and the charger itself.

Symptoms

• DC fast charging speed well below the 250 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 40-50%
• Center screen shows lower power than the charger's rated output
• Charging session starts strong but slows down within 10 minutes

What to Do

1. 1

   Set the charger as your navigation destination

   Use Google Maps on the 14.5-inch center screen to navigate to the charging station. The EX90 will start preconditioning the battery automatically during the drive, preparing it for peak charging speed.

2. 2

   Check the charger's rated power

   Before plugging in, check the charger's label or the app for its maximum output. If the charger is rated at 150 kW, your EX90 cannot charge faster than 150 kW regardless of its 250 kW capability.

3. 3

   Check your state of charge

   For the fastest charging, arrive between 10-20%. The EX90's peak speeds are available at lower states of charge. Above 80%, charging will slow significantly.

4. 4

   Verify the charger is not sharing power

   Many chargers split power between two connectors. If someone is using the adjacent stall, both cars get reduced speeds. Move to a charger with both stalls free.

5. 5

   Check AC charge current settings

   If charging slowly on AC, check the EX90's settings to ensure the charge current limiter is set to maximum. Also verify your wallbox is properly wired for 3-phase.

6. 6

   Try a higher-powered charger

   To take advantage of the EX90's 250 kW capability, look for chargers rated at 300 kW or higher. These are available from networks like Ionity, Fastned, and others.

Session fails to start or charger shows an error

The charger does not begin charging after you plug in and authenticate. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• You plug in and authenticate but the charger displays an error
• The charger screen stays on the welcome screen and does not proceed
• The app shows 'session starting' but nothing happens at the charger
• The connector locks but no power flows

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger sometimes fails. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session from the K-Lataus app

   If RFID authentication is not working, open the K-Lataus app, select the station and charger, and start the session through the app instead.

3. 3

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

4. 4

   Check that your vehicle is ready to charge

   Make sure your vehicle is not in a state that prevents charging, such as a charging schedule being active, the charge port not fully engaged, or a vehicle-side error. Check your vehicle's dashboard for any warnings.

Setting up the K-Lataus app for the first time

K-Lataus has its own dedicated app. First-time setup requires a K-Group account and a payment method linked specifically to the K-Lataus service.

Symptoms

• You are not sure which app to use for K-Lataus charging
• Your K-Group login works on the K-Group website but not in the K-Lataus app
• You cannot find a way to add a payment method for charging
• You cannot find the K-Lataus app in your app store

How to Fix It

1. 1

   Install the K-Lataus app

   Search for 'K-Lataus' in the App Store or Google Play and install it. This is the dedicated app for K-Lataus EV charging. K-Ruoka is for groceries, not for charging.

2. 2

   Log in with your K-Group credentials

   Use the same K-Group username and password you use for other K-Group services. If you do not have a K-Group account yet, you can create one in the app.

3. 3

   Add a payment method in the K-Lataus app

   Go to payment settings in the K-Lataus app and add a credit or debit card. The K-Lataus app manages its own payment methods separately from other K-Group services.

4. 4

   Find a station and start your first session

   Use the map in the K-Lataus app to find a nearby station. Plug in your vehicle, then tap Start in the app or use an RFID card to begin charging.

Parking time limits at grocery store locations

K-Lataus chargers sit in K-Citymarket and K-Market parking lots, which often have monitored parking with time limits. You may get a parking notice if you stay too long.

Symptoms

• You see parking time limit signs (e.g. 2 or 3 hours) in the parking lot
• You received a parking notice even though you were charging
• Your charging session takes longer than the allowed parking time
• Camera-monitored parking is active in the lot

How to Fix It

1. 1

   Check the parking rules when you arrive

   Most K-Citymarket and K-Market parking lots have posted time limits, often 2 to 4 hours, enforced by camera monitoring or a parking operator. These rules apply to EV charging spots too.

2. 2

   Use a parking disc if required

   Many Finnish parking lots still require a parking disc (pysäköintikiekko). Set the arrival time and display it on your dashboard, even if the lot also has camera monitoring.

3. 3

   Set a phone timer to move your car

   If you are shopping while charging, set an alarm so you can return before the parking limit expires. A DC fast charger at 200 kW should get you a substantial charge well within a 2-hour window.

4. 4

   Unplug when charging is complete

   Do not leave your vehicle occupying the charging spot after it finishes. Other EV drivers need the spot, and some parking operators treat finished-but-still-connected vehicles as overstaying.

New stations not appearing in third-party apps

K-Lataus is expanding its network, but newer stations sometimes take weeks to appear in third-party apps and aggregators like PlugShare or Google Maps.

Symptoms

• The K-Lataus app shows a station that does not appear in PlugShare or ABRP
• You planned a route using a third-party app and it skipped a nearby K-Lataus station
• A station listed as 'coming soon' in the K-Lataus app is actually already operational
• Google Maps does not show K-Lataus chargers at a location where you know they exist

How to Fix It

1. 1

   Use the K-Lataus app as the primary source for station locations

   The K-Lataus app is always the most up-to-date source for K-Lataus stations. Third-party apps rely on data feeds that may lag behind actual station openings by days or weeks.

2. 2

   Cross-check with the K-Lataus website

   The K-Lataus website also maintains a station map. Check it if the app is not giving you the information you need or if you want to plan ahead on a larger screen.

3. 3

   Report missing stations to third-party apps

   If you use PlugShare or ABRP regularly, you can add missing stations yourself. This helps other EV drivers find K-Lataus locations that are not yet in the database.

4. 4

   For route planning, combine K-Lataus with other network apps

   When planning a longer trip, check the K-Lataus app alongside ABRP or a similar route planner. The K-Lataus app shows the latest stations, while the route planner optimizes your overall charging stops across all networks.

Slow charging or failed sessions at older units in winter

Some older K-Lataus charger units perform less reliably in extreme cold. Winter in Finland brings temperatures that can affect both the charger hardware and your vehicle's battery.

Symptoms

• The charger takes a long time to initialize in freezing conditions
• Session fails with a generic error after a long handshake attempt
• Charging speed is much lower than expected at a 200 kW station
• The charger screen is slow to respond or displays incorrectly in cold weather

How to Fix It

1. 1

   Precondition your battery before arriving

   If your vehicle has a battery preconditioning feature (most newer EVs do), activate it before arriving at the charger. A warm battery accepts power faster and communicates more reliably with the charger during the initial handshake.

2. 2

   Try unplugging and reconnecting

   In cold weather, the initial handshake between your vehicle and the charger can time out. Unplug, wait 30 seconds, and try again. Sometimes the second attempt connects cleanly.

3. 3

   Try a different charger unit at the same station

   If the station has multiple charger units, one may be more reliable than the other. Older units can have more cold-weather issues than newer installations.

4. 4

   Report consistently problematic chargers

   If a specific charger unit fails repeatedly in cold weather, report it through the K-Lataus app. This helps K-Group identify hardware that needs maintenance or replacement.

5. 5

   Accept that cold weather reduces charging speed

   Even when everything works perfectly, a cold battery charges slower. This is a physics limitation, not a charger fault. The first 10 to 15 minutes of a session may be slower until the battery warms up from the charging current itself.