Volvo EX90 Charging at Badenova

Volvo EX90 Plugged In but the Charger Will Not Start

You connected the cable to your Volvo EX90 and nothing happens. No charging indicator on the screen, no confirmation from the charger. The EX90 supports Plug & Charge and multiple authentication methods, but when none of them work, you need to troubleshoot step by step.

Symptoms

• Charger displays an error after plugging in the EX90
• Charge port LED does not light up or stays amber
• 14.5-inch center screen shows no active charging session
• Charger screen says 'waiting for vehicle' or shows a timeout
• CCS connector plugs in but does not lock into the charge port

What to Do

1. 1

   Authenticate with the charger

   Check the charger's screen for payment instructions. Tap your RFID card, open the charging network's app, or use contactless payment. Plug & Charge should activate automatically on supported networks, but if it does not, use manual authentication.

2. 2

   Check the charge port on the left rear

   Open the charge port door fully. Check for ice, snow, or debris. In winter, gently clear any obstructions. Make sure the port cover is not partially blocking the connector.

3. 3

   Seat the connector firmly

   Push the CCS2 connector straight into the port until it clicks and locks. If it will not lock, pull it out and try again. Check that the connector pins are clean and undamaged.

4. 4

   Turn off scheduled charging

   On the center screen, go to Settings, then Charging. If a charging schedule is active, disable it or switch to 'charge immediately.' This is a common reason charging will not start at public chargers.

5. 5

   Restart the charging process

   Unplug the connector, lock and unlock the car using the Volvo Cars app or key, wait 15 seconds, then plug in again. This resets the charging communication.

Volvo EX90 Charger Payment Failed or Card Declined

You are at a public charger with your Volvo EX90 and the payment will not go through. The card reader rejects your card, the app throws an error, or Plug & Charge just does not activate. Payment issues at public chargers are one of the most common frustrations, and they have nothing to do with your car's charging system.

Symptoms

• Charger screen shows 'payment failed' or 'card declined'
• Plug & Charge does not activate when you connect the cable
• Charging app shows a payment error or insufficient balance
• Contactless payment terminal does not respond
• You cannot find any way to pay at the charger

What to Do

1. 1

   Check Plug & Charge status in the Volvo Cars app

   Open the Volvo Cars app and verify that Plug & Charge is enabled with a valid payment method. If the network supports it, try unplugging and reconnecting. If not, proceed to manual payment.

2. 2

   Try a different payment method

   Use a different credit or debit card, your phone's mobile wallet, or the charging network's app. Having multiple options avoids being stuck when one fails.

3. 3

   Check for pre-authorization holds

   Open your banking app and look for pending charges from the charging network. Multiple failed attempts may have placed several holds, reducing your available balance. Contact your bank if needed.

4. 4

   Use the charging network's app instead

   Find the network name on the charger. Download their app, create an account, add a payment method, and start the session through the app. This bypasses the physical payment terminal entirely.

5. 5

   Tap your RFID charging card

   If you carry an RFID card from a charging provider or roaming service, tap it on the charger's card reader. RFID cards are often more reliable than apps or contactless terminals.

Volvo EX90 Charging Slower Than Expected at DC or AC

You plugged in your Volvo EX90 expecting 250 kW and the 14.5-inch screen shows 60 kW. Or your wallbox is only delivering 3 kW instead of 11 kW. The EX90 has one of the fastest charging speeds in its class, but reaching that peak depends on battery temperature, state of charge, and the charger itself.

Symptoms

• DC fast charging speed well below the 250 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 40-50%
• Center screen shows lower power than the charger's rated output
• Charging session starts strong but slows down within 10 minutes

What to Do

1. 1

   Set the charger as your navigation destination

   Use Google Maps on the 14.5-inch center screen to navigate to the charging station. The EX90 will start preconditioning the battery automatically during the drive, preparing it for peak charging speed.

2. 2

   Check the charger's rated power

   Before plugging in, check the charger's label or the app for its maximum output. If the charger is rated at 150 kW, your EX90 cannot charge faster than 150 kW regardless of its 250 kW capability.

3. 3

   Check your state of charge

   For the fastest charging, arrive between 10-20%. The EX90's peak speeds are available at lower states of charge. Above 80%, charging will slow significantly.

4. 4

   Verify the charger is not sharing power

   Many chargers split power between two connectors. If someone is using the adjacent stall, both cars get reduced speeds. Move to a charger with both stalls free.

5. 5

   Check AC charge current settings

   If charging slowly on AC, check the EX90's settings to ensure the charge current limiter is set to maximum. Also verify your wallbox is properly wired for 3-phase.

6. 6

   Try a higher-powered charger

   To take advantage of the EX90's 250 kW capability, look for chargers rated at 300 kW or higher. These are available from networks like Ionity, Fastned, and others.

App-only payment with no backup option at the charger

Badenova chargers require the Badenova app to start a session. There is no contactless card reader on the charger and no RFID option. If the app is not working, you cannot charge.

Symptoms

• The charger has no contactless payment terminal or RFID reader
• You do not have the Badenova app installed and cannot download it at the station
• The app will not load or crashes when trying to start a session
• You have no mobile data signal at the station and cannot use the app

How to Fix It

1. 1

   Install and set up the Badenova app before you need it

   Download the Badenova app and create an account with a valid payment method before your first visit. Trying to set up an account at the station, possibly with poor signal, is a frustrating experience you can avoid.

2. 2

   Try connecting to Wi-Fi if your mobile data is weak

   Some Badenova stations or nearby businesses may offer Wi-Fi. If your mobile data is too weak to load the app, look for available networks. Even a slow connection is enough to start a session.

3. 3

   Restart the app or your phone

   If the app crashes or freezes, close it completely and reopen it. If that does not help, restart your phone. App-only chargers depend entirely on your phone working, so basic troubleshooting matters.

4. 4

   Drive to an alternative charger with contactless payment

   If the app is genuinely broken or you have no signal, you need a charger that accepts contactless payment or RFID. Check another charging app (Ionity, EnBW mobility+, or a roaming app) for the nearest alternative station. This is the downside of app-only networks: no app, no charge.

5. 5

   Check if a roaming app supports Badenova stations

   Some roaming platforms (like EnBW mobility+ or Maingau) may include Badenova stations. If you already have a roaming app installed, search for the station there. You can sometimes start a session through a roaming app when the native app is not cooperating.

Regional coverage limited to southwestern Germany

Badenova's network is concentrated in the Baden-Württemberg region, especially around Freiburg, the Upper Rhine area, and surrounding towns. Outside this region, you will not find Badenova chargers.

Symptoms

• The Badenova app shows no stations outside the Freiburg/Baden region
• You assumed Badenova coverage would extend along the Autobahn but it does not
• The nearest Badenova station is 100 km or more from your destination
• You are driving through Germany and planned stops based on Badenova but ran into coverage gaps

How to Fix It

1. 1

   Check Badenova coverage before planning your route

   Open the Badenova app and look at the station map. You will see that coverage is regional, not national. If your trip extends beyond southwestern Germany, you need additional networks.

2. 2

   Install apps for national German networks

   For travel across Germany, install EnBW mobility+ (large national network), Ionity (Autobahn-focused), or Fastned. These networks have stations along major highways throughout the country.

3. 3

   Use a roaming app for multi-network access

   EnBW mobility+ and Maingau EinfachStromLaden work as roaming apps that access chargers from dozens of operators. One app covers you across Germany instead of installing a separate app for each regional operator.

4. 4

   Plan with a multi-network route planner for longer trips

   A Better Routeplanner (ABRP) shows chargers from all operators. Enter your vehicle model and destination to get optimized stops. Badenova stations will appear where they exist, and other networks fill the gaps.

App interface in German only

The Badenova app is designed for the German market and the interface is in German. If German is not your language, navigating the app takes extra effort.

Symptoms

• All app menus and buttons are in German
• Error messages from the charger (shown in the app) are in German
• You cannot find the 'start session' button because labels are in German
• Account setup and payment forms are in German

How to Fix It

1. 1

   Learn the key German charging terms

   'Laden starten' means start charging. 'Laden beenden' means stop charging. 'Verfügbar' means available. 'Besetzt' means occupied. 'Außer Betrieb' means out of order. 'Bezahlung' means payment. These cover most of what you need.

2. 2

   Set up your account at home with a translation tool open

   Create your Badenova account and add your payment method at home where you can take your time. Use Google Translate or a similar tool to translate the forms. You only need to do this once.

3. 3

   Use your phone's built-in app translation

   On Android, the system can translate app interfaces into your language. On iOS, you can screenshot any page and use the built-in translation feature. This helps with settings you do not visit often.

4. 4

   Memorize the session flow

   The flow is the same every time: open app, find station on map, select charger, tap start. Once you know the sequence, the German labels are less of a barrier. Practice at home before your first real session.

Stations at company premises with limited access hours

Some Badenova chargers are installed at business locations or company parking areas that have restricted access during evenings, weekends, or holidays.

Symptoms

• You arrived at a station and the parking area is gated or locked
• The charger is accessible during business hours but not when you need it
• The app shows the station as available but you physically cannot reach it
• Weekend or holiday access is restricted

How to Fix It

1. 1

   Check the station details in the app for access hours

   Some Badenova stations list opening hours or access restrictions in the station details. Before driving there, look for notes about access times, especially if you plan to charge in the evening, early morning, or on weekends.

2. 2

   Look for a gate code or intercom

   Some company premises with public chargers provide a gate code or intercom button for EV drivers. Check the station listing in the app or look for instructions near the gate entrance.

3. 3

   Drive to a publicly accessible alternative

   If the station is behind a locked gate, your only option is to find another charger. Check the Badenova app or a roaming app for the next nearest station that is on a public road or in a publicly accessible parking area.

4. 4

   Prefer stations at public locations when planning ahead

   For reliability, prioritize Badenova stations that are on public streets or at commercial locations (supermarkets, public parking garages). These are accessible 24/7 regardless of business hours.

Fewer fallback stations when a charger is broken

Badenova is a smaller regional network. If the charger you planned to use is out of order, the next Badenova station may be far away. Larger networks offer more alternatives within a short drive.

Symptoms

• You arrived and the charger shows 'Außer Betrieb' (out of order)
• The next Badenova station is 20 km or more away
• You do not have another charging app installed
• Your battery is low and you need to charge now

How to Fix It

1. 1

   Check for other Badenova stations nearby

   Open the Badenova app and look at the map for alternative stations in the area. Even in their core region, stations may be spaced 10 to 30 km apart.

2. 2

   Search for chargers from other operators

   Open a roaming app (EnBW mobility+, Maingau, or Chargemap) and search for any available fast charger nearby, regardless of operator. In Baden-Württemberg, EnBW has good coverage that often fills Badenova's gaps.

3. 3

   Look for AC chargers as a last resort

   If no DC fast charger is available, an AC charger at a hotel, parking garage, or public lot can add enough range to reach the next working fast charger. It is slower, but it keeps you moving.

4. 4

   Report the broken charger in the Badenova app

   Let Badenova know the charger is out of order. Smaller networks depend on user reports to dispatch maintenance. Your report helps the next driver.

5. 5

   Always have a backup network app installed

   With any smaller regional network, carry at least one additional charging app (like EnBW mobility+ or Ionity) as insurance. Setting this up takes five minutes and saves you from being stranded.