Tesla Model S Charging at EnergyVision

Tesla Model S Charger Will Not Start a Session

You plugged in your Model S and nothing is happening. No green light on the charge port, no animation on the 17-inch touchscreen, just silence. Whether you are at a Supercharger, a third-party CCS2 station, or a home wallbox, there are a handful of common reasons the session will not begin.

Symptoms

• Charge port LED stays white or flashes red after plugging in the connector
• 17-inch touchscreen shows no charging animation or displays an error message
• Supercharger stall makes a click but does not begin delivering power
• CCS2 connector at a third-party station locks in but charging never starts
• Tesla app shows 'Not Charging' even though the cable is connected

What to Do

1. 1

   Check the charge port LED color

   Walk to the left rear of the car and look at the charge port light. White means ready but not connected. Blue means communicating. Green means charging. Red or amber means there is a fault. If it is white with the cable plugged in, remove and reseat the connector firmly.

2. 2

   Unplug and replug the connector

   Remove the connector completely, wait five seconds, then reinsert it until you hear the latch click. On CCS2 connectors, make sure both the top (AC pins) and bottom (DC pins) sections are seated properly.

3. 3

   Check for scheduled charging on the touchscreen

   On the 17-inch touchscreen, go to Controls, then Charging. If scheduled charging is active, you will see the planned start time. Tap to disable it or select 'Charge Now' to override the schedule.

4. 4

   Authorize the session at non-Tesla chargers

   At third-party CCS2 stations, check whether the charger requires you to start the session through an app, RFID card, or contactless payment. Plug & Charge works at supported stations, but many still require manual authorization.

5. 5

   Try a different stall or charger

   If you are at a Supercharger, move to a different stall. If you are at a third-party station, try the other connector. A faulted charger looks identical to a working one from the outside.

6. 6

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the 17-inch touchscreen goes black and reboots. This resets the charging controller and fixes some communication glitches. The car stays on during the reboot.

Tesla Model S Payment Failed at Charging Station

You are plugged in and the charger is waiting for payment, or the Supercharger session will not start because of a billing issue. Payment problems are one of the most common reasons drivers get stuck at chargers, and the Model S has multiple ways to pay depending on where you are charging.

Symptoms

• Supercharger session will not start and the Tesla app shows a payment error
• Third-party CCS2 charger displays 'Authorization failed' after tapping your card
• RFID card is not recognized by the charger's reader
• Plug & Charge does not activate at a supported station
• Contactless bank card is rejected by the charger's payment terminal

What to Do

1. 1

   Check your Tesla account payment method

   Open the Tesla app on your phone. Go to Account, then Payment. Verify your credit card is current and has not expired. If the card was replaced, update the details. Supercharger sessions will not start without a valid payment method on file.

2. 2

   Try a different payment method at the charger

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two payment methods gives you a backup when one does not work.

3. 3

   Scan the charger QR code for browser payment

   Most public chargers have a QR code on the unit. Scanning it with your phone opens the operator's payment page in your browser. You can usually pay with a credit card directly without downloading their app.

4. 4

   Check your banking app for blocked transactions

   Open your banking app and look for flagged or declined transactions. Some banks require you to approve the charge manually. Approve it and retry the payment at the charger.

5. 5

   Try Plug & Charge by replugging

   If the charger supports Plug & Charge, unplug the CCS2 connector from your Model S, wait a few seconds, and replug. Payment should authorize automatically through the cable. This only works if your Tesla account has Plug & Charge enabled and the charger supports ISO 15118.

6. 6

   Move to a Supercharger or a different station

   If you cannot resolve the payment issue, find a Tesla Supercharger using the nav on the 17-inch touchscreen. Supercharger billing is handled entirely through your Tesla account, bypassing third-party payment systems.

Tesla Model S Charging Slower Than Expected at Charger

You pulled into a Supercharger expecting 250 kW and the 17-inch touchscreen shows 80 kW. Or your home wallbox is crawling at 3 kW instead of 11 kW. The Model S has one of the fastest charging curves on the road, but reaching peak speed depends on battery temperature, state of charge, and a few settings you can check in under a minute.

Symptoms

• DC fast charging power well below 250 kW on the touchscreen despite a rated charger
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 40-50% on the touchscreen during DC fast charging
• Supercharger shows significantly lower kW than neighboring stalls
• Non-Tesla CCS2 charger delivers far less power than its rated maximum

What to Do

1. 1

   Check if the battery was preconditioned

   On the 17-inch touchscreen, tap the charging icon. If you see a snowflake icon or a message about conditioning, the battery was not warm enough when you arrived. Next time, navigate to the charger using Tesla nav at least 20-30 minutes before arrival so preconditioning kicks in automatically.

2. 2

   Check your current state of charge

   If you are above 50%, the slower speed is expected on the 95 kWh NCA pack. Peak power happens roughly between 5-30%. For the fastest charging stops on a road trip, arrive between 10-20%.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in A/B pairs (3A/3B, 4A/4B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers with the Magic Dock or the new V4 cable, this is not a concern.

4. 4

   Check the AC charge current limit on the touchscreen

   Go to Controls, then Charging on the touchscreen. Look for the charge current setting. Make sure it is set to the maximum amperage. This only affects AC charging at home or destination chargers, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds remain low, the charger hardware may be degraded. Try another stall at the same location. On non-Tesla CCS2 stations, check the charger display for error codes or reduced power notices.

6. 6

   Check for a Tesla software update

   Go to Controls, then Software on the touchscreen. If an update is pending, install it. Tesla has adjusted charging curves through over-the-air updates in the past, sometimes improving peak speeds.

Session won't start or authentication fails

You try to start a session through the EnergyVision app or charge card, but the charger does not respond or shows an error.

Symptoms

• The app will not connect to the charger or keeps loading
• Your RFID charge card is not recognized
• You have no mobile data at the station location
• The charger screen shows an error after authentication

How to Fix It

1. 1

   Install and set up the EnergyVision app before you travel

   Create your account and add a payment method at home, on a reliable internet connection. Do not try to set up the app for the first time at a station with weak signal.

2. 2

   Try a different authentication method

   If the app is not working, try your EnergyVision charge card (RFID) instead, or vice versa. Having both options available increases your chances of starting a session.

3. 3

   Try switching between Wi-Fi and mobile data

   Some apps struggle with certain network configurations. Toggle your phone's Wi-Fi off (or on, if a nearby network is available) and try again. Sometimes a network switch forces the app to reconnect.

4. 4

   Restart the app and your phone

   Close the app completely (not just minimize), reopen it, and try again. If that fails, restart your phone.

5. 5

   Have a backup charging app ready

   Always carry a second charging app from a larger network. If EnergyVision is not working, you need to find an alternative charger from another operator.

Limited station coverage

EnergyVision has fewer stations than major networks. This means longer distances between chargers and fewer alternatives if a station is broken or occupied.

Symptoms

• The app shows very few stations along your route
• The nearest EnergyVision station is 50 km or more away
• You arrived at the only EnergyVision station in the area and it is out of order
• There is no second EnergyVision charger to fall back to

How to Fix It

1. 1

   Never rely on EnergyVision as your only charging option

   Plan your route with at least one alternative network at each stop. EnergyVision stations are a bonus when they work, but their spacing means you cannot depend on them exclusively.

2. 2

   Install apps for larger networks in the same region

   Identify which major networks operate near EnergyVision stations (Ionity, Shell Recharge, Fastned, or regional operators). Install their apps so you can switch quickly if needed.

3. 3

   Use a multi-network route planner

   A Better Routeplanner (ABRP) or similar tools show chargers from all operators. Plan your stops based on all available chargers, not just one network. EnergyVision stations will appear where they exist.

4. 4

   Charge a little extra at reliable stations before entering sparse areas

   If your next stop is an EnergyVision station in an area with few alternatives, charge to 90% at the station before it instead of the usual 80%. The extra buffer gives you range to reach a different charger if the EnergyVision station is down.

Different charger hardware at different locations

EnergyVision uses charger units from different manufacturers at different stations. This means the physical interface, cable handling, and screen layout vary from one station to the next.

Symptoms

• The charger at this station looks completely different from the last EnergyVision station you used
• The connector release mechanism works differently than expected
• The charger screen layout does not match what you see in the app
• Error codes or messages are in a different format than at other EnergyVision stations

How to Fix It

1. 1

   Check the charger unit for basic instructions

   Most charger manufacturers print basic instructions on the unit itself: where to plug in, how to release the connector, and where the emergency stop button is. Take a moment to read these, as they vary between manufacturers.

2. 2

   Start the session through the app, not the charger screen

   Regardless of the charger hardware, the EnergyVision app is the consistent interface. Start and stop sessions through the app. The charger screen is secondary.

3. 3

   If the connector release is different, check for a button or lever

   Some charger manufacturers use a push-button release, others use a lever, and some release automatically when the session ends. Look at the connector handle and the charger unit for release instructions.

4. 4

   Report hardware-specific problems in the app

   If a charger unit from a specific manufacturer is repeatedly problematic, report it through the EnergyVision app. Include details about what happened so the support team can pass it to the hardware vendor.

App not available in all app stores or regions

Smaller networks sometimes have app availability issues. The EnergyVision app may not appear in your app store if your account is set to a country where EnergyVision does not operate.

Symptoms

• You search for 'EnergyVision' in your app store and no results appear
• The app is listed but marked as 'not available in your country'
• You found the app but it will not install on your phone model
• A link to the app store listing leads to a 'not found' page

How to Fix It

1. 1

   Check the EnergyVision website for the correct app name and link

   The app may be listed under a slightly different name in some app stores. Visit the EnergyVision website on your phone and look for a direct download link that opens the correct store listing.

2. 2

   Check your app store country setting

   If your App Store or Google Play account is set to a country where EnergyVision does not operate, the app may be hidden. You can check this in your store account settings.

3. 3

   Check if a roaming app supports EnergyVision stations

   Some roaming platforms include smaller networks. Search for the station location in a roaming app (like Chargemap or Octopus Electroverse) to see if you can start a session through a third-party app instead.

4. 4

   Contact EnergyVision support for alternative access

   If you cannot install the app, contact EnergyVision through their website. They may have a web-based session starter or be able to suggest a roaming provider that includes their stations.

Slower support response times

As a smaller operator, EnergyVision may have fewer support staff than major networks. Response times for non-urgent issues can be longer, and phone support may have limited hours.

Symptoms

• You reported an issue through the app and have not heard back
• The support phone number goes to voicemail or has limited hours
• You need help at a station but cannot reach anyone
• Your email to support has not been answered after several days

How to Fix It

1. 1

   Use the app's support feature for the fastest response

   In-app support requests typically get prioritized over emails sent to a general address. If the app has a help, chat, or report issue option, use that first.

2. 2

   Include all relevant details in your first message

   To avoid back-and-forth that stretches across days, include: station location, charger ID (printed on the unit), time of the issue, what happened, and any error messages. Screenshots help.

3. 3

   Do not wait at a broken charger for support to respond

   If a charger is not working and support is not answering, move on. Report the issue through the app and drive to the next available charger from any network. Waiting at a broken charger hoping for a callback is not practical.

4. 4

   For billing disputes, document everything

   Screenshot your charging session details (from the app), note the charger ID and time, and save any error messages. If you were charged for a failed session, this documentation helps you get a refund when support responds.