Tesla Model 3 Charging at EnergyVision

Tesla Model 3 Charger Won't Start a Charging Session

You have plugged in your Model 3, the charge port light is doing something weird, and nothing is happening. This is one of the most common frustrations for EV drivers. The good news is that it is almost always fixable on the spot. The cause is usually authentication, the charge port latch, or the charger itself.

Symptoms

• Charge port LED flashes amber or red after plugging in the CCS2 connector
• Touchscreen shows an error message instead of the charging screen
• Charger display says 'Waiting for vehicle' or 'Authentication failed'
• Charge port will not open when pressing the button on the connector
• Supercharger session does not start automatically after plugging in

What to Do

1. 1

   Unplug and replug the connector firmly

   Pull the connector out completely. Wait 5 seconds. Push it back in firmly until you hear a click and the charge port LED turns green or starts pulsing. On CCS2, the lower DC pins need to seat fully.

2. 2

   Check the touchscreen for error messages

   Look at the charging screen on the touchscreen. It will tell you if there is an error, if scheduled charging is active, or if the car is waiting for something. If Scheduled Charging is delaying the session, tap 'Charge Now' to override it.

3. 3

   Authenticate with the charging network

   At non-Tesla chargers, open the network's app (Ionity, Shell Recharge, or whichever network). Start the session through the app, or tap your RFID card on the charger. At Tesla Superchargers, this step is automatic.

4. 4

   Try the manual charge port release if the port is stuck

   If the charge port will not open, try tapping your Tesla key card on the B-pillar and pressing the charge port door. You can also open it from the touchscreen under Controls. In freezing weather, pour lukewarm water around the port to melt ice. Never force it.

5. 5

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the Tesla logo appears. This restarts the infotainment system and can clear communication errors between the car and the charger.

6. 6

   Try a different charger or stall

   If nothing works, the charger may be faulty. Move to a different stall or station. At Superchargers, the Tesla app shows stall availability in real time.

Tesla Model 3 Payment Failed at the Charging Station

You plugged in, everything looked fine, and then the charger says payment failed. Or the session will not start because authentication did not go through. Payment problems are different at Tesla Superchargers versus non-Tesla CCS2 chargers, so the fix depends on where you are.

Symptoms

• Charger display shows 'Payment failed' or 'Transaction declined' after tapping a card
• Tesla Supercharger session will not start and the Tesla app shows a billing error
• Non-Tesla CCS2 charger shows 'Authentication failed' after scanning RFID or using an app
• Contactless payment terminal on the charger does not respond to your bank card
• Charging starts but stops after a few seconds with a payment-related error on the charger screen

What to Do

1. 1

   Check if this is a Tesla Supercharger or a non-Tesla station

   At Tesla Superchargers, payment is automatic through your Tesla account. At non-Tesla CCS2 chargers, you need to authenticate separately. The fix is completely different for each.

2. 2

   For Superchargers: update your payment method in the Tesla app

   Open the Tesla app, go to Account, then Payment. Check that your card is current and not expired. Add a new card if needed. Then try the Supercharger again. The session should start automatically after plugging in.

3. 3

   For non-Tesla chargers: authenticate through the network app

   Open the charging network's app (Ionity, Shell Recharge, Virta, or whichever network runs the charger). Select the charger, start the session, then plug in. Make sure the app shows your payment method is valid.

4. 4

   Try a different payment method at the charger

   If the contactless terminal failed, try the network's app instead. If the app failed, try an RFID card. If you do not have the network's app, some chargers accept ad-hoc payments through a QR code on the charger.

5. 5

   Call your bank if repeated transactions are declined

   If your card keeps getting declined at chargers, your bank may be blocking charging transactions. Call the number on the back of your card and let them know you are making EV charging payments. They can whitelist these merchants.

6. 6

   Move to a different charger if the payment terminal is broken

   If the charger's payment terminal is physically unresponsive, try a different stall. Report the broken terminal through the network's app so they can fix it.

Tesla Model 3 Charging Slower Than Expected at Charger

You plugged in your Model 3 expecting 175 kW and the touchscreen shows 50 kW. Or your home wallbox is stuck at 3 kW instead of 11 kW. Slow charging on the Model 3 is almost never a defect. It is usually the battery temperature, a charger limitation, or a setting you can fix on the touchscreen in under a minute.

Symptoms

• DC fast charging power well below the 175 kW maximum shown on the touchscreen
• AC home charging stuck at 3-4 kW instead of the expected 11 kW
• Charging speed drops sharply after reaching 50-60% on the touchscreen
• Supercharger shows lower kW than the stall is rated for
• Touchscreen charging animation shows a slow trickle instead of rapid charging

What to Do

1. 1

   Check the battery temperature on the touchscreen

   Tap the charging icon on the touchscreen. If the battery is cold, you will see a snowflake icon or a message about reduced charging speed. To fix this, use the Tesla nav to route to a Supercharger. The car will automatically precondition the battery during the drive.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is expected. For the fastest DC charging, arrive between 10-20%. The Model 3 LFP hits peak power in the 10-50% range.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in pairs (1A/1B, 2A/2B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers, this is not an issue.

4. 4

   Check the AC charge current limit

   On the touchscreen, go to Controls, then Charging. Look for the charge current slider or setting. Make sure it is set to the maximum value. This only affects AC charging, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds are still low, the charger may be degraded. Try a different stall at the same location. On non-Tesla CCS chargers, some stations deliver less power than advertised.

6. 6

   Check for a software update

   Go to Controls, then Software on the touchscreen. If an update is available, install it. Tesla occasionally adjusts charging curves through software updates.

Session won't start or authentication fails

You try to start a session through the EnergyVision app or charge card, but the charger does not respond or shows an error.

Symptoms

• The app will not connect to the charger or keeps loading
• Your RFID charge card is not recognized
• You have no mobile data at the station location
• The charger screen shows an error after authentication

How to Fix It

1. 1

   Install and set up the EnergyVision app before you travel

   Create your account and add a payment method at home, on a reliable internet connection. Do not try to set up the app for the first time at a station with weak signal.

2. 2

   Try a different authentication method

   If the app is not working, try your EnergyVision charge card (RFID) instead, or vice versa. Having both options available increases your chances of starting a session.

3. 3

   Try switching between Wi-Fi and mobile data

   Some apps struggle with certain network configurations. Toggle your phone's Wi-Fi off (or on, if a nearby network is available) and try again. Sometimes a network switch forces the app to reconnect.

4. 4

   Restart the app and your phone

   Close the app completely (not just minimize), reopen it, and try again. If that fails, restart your phone.

5. 5

   Have a backup charging app ready

   Always carry a second charging app from a larger network. If EnergyVision is not working, you need to find an alternative charger from another operator.

Limited station coverage

EnergyVision has fewer stations than major networks. This means longer distances between chargers and fewer alternatives if a station is broken or occupied.

Symptoms

• The app shows very few stations along your route
• The nearest EnergyVision station is 50 km or more away
• You arrived at the only EnergyVision station in the area and it is out of order
• There is no second EnergyVision charger to fall back to

How to Fix It

1. 1

   Never rely on EnergyVision as your only charging option

   Plan your route with at least one alternative network at each stop. EnergyVision stations are a bonus when they work, but their spacing means you cannot depend on them exclusively.

2. 2

   Install apps for larger networks in the same region

   Identify which major networks operate near EnergyVision stations (Ionity, Shell Recharge, Fastned, or regional operators). Install their apps so you can switch quickly if needed.

3. 3

   Use a multi-network route planner

   A Better Routeplanner (ABRP) or similar tools show chargers from all operators. Plan your stops based on all available chargers, not just one network. EnergyVision stations will appear where they exist.

4. 4

   Charge a little extra at reliable stations before entering sparse areas

   If your next stop is an EnergyVision station in an area with few alternatives, charge to 90% at the station before it instead of the usual 80%. The extra buffer gives you range to reach a different charger if the EnergyVision station is down.

Different charger hardware at different locations

EnergyVision uses charger units from different manufacturers at different stations. This means the physical interface, cable handling, and screen layout vary from one station to the next.

Symptoms

• The charger at this station looks completely different from the last EnergyVision station you used
• The connector release mechanism works differently than expected
• The charger screen layout does not match what you see in the app
• Error codes or messages are in a different format than at other EnergyVision stations

How to Fix It

1. 1

   Check the charger unit for basic instructions

   Most charger manufacturers print basic instructions on the unit itself: where to plug in, how to release the connector, and where the emergency stop button is. Take a moment to read these, as they vary between manufacturers.

2. 2

   Start the session through the app, not the charger screen

   Regardless of the charger hardware, the EnergyVision app is the consistent interface. Start and stop sessions through the app. The charger screen is secondary.

3. 3

   If the connector release is different, check for a button or lever

   Some charger manufacturers use a push-button release, others use a lever, and some release automatically when the session ends. Look at the connector handle and the charger unit for release instructions.

4. 4

   Report hardware-specific problems in the app

   If a charger unit from a specific manufacturer is repeatedly problematic, report it through the EnergyVision app. Include details about what happened so the support team can pass it to the hardware vendor.

App not available in all app stores or regions

Smaller networks sometimes have app availability issues. The EnergyVision app may not appear in your app store if your account is set to a country where EnergyVision does not operate.

Symptoms

• You search for 'EnergyVision' in your app store and no results appear
• The app is listed but marked as 'not available in your country'
• You found the app but it will not install on your phone model
• A link to the app store listing leads to a 'not found' page

How to Fix It

1. 1

   Check the EnergyVision website for the correct app name and link

   The app may be listed under a slightly different name in some app stores. Visit the EnergyVision website on your phone and look for a direct download link that opens the correct store listing.

2. 2

   Check your app store country setting

   If your App Store or Google Play account is set to a country where EnergyVision does not operate, the app may be hidden. You can check this in your store account settings.

3. 3

   Check if a roaming app supports EnergyVision stations

   Some roaming platforms include smaller networks. Search for the station location in a roaming app (like Chargemap or Octopus Electroverse) to see if you can start a session through a third-party app instead.

4. 4

   Contact EnergyVision support for alternative access

   If you cannot install the app, contact EnergyVision through their website. They may have a web-based session starter or be able to suggest a roaming provider that includes their stations.

Slower support response times

As a smaller operator, EnergyVision may have fewer support staff than major networks. Response times for non-urgent issues can be longer, and phone support may have limited hours.

Symptoms

• You reported an issue through the app and have not heard back
• The support phone number goes to voicemail or has limited hours
• You need help at a station but cannot reach anyone
• Your email to support has not been answered after several days

How to Fix It

1. 1

   Use the app's support feature for the fastest response

   In-app support requests typically get prioritized over emails sent to a general address. If the app has a help, chat, or report issue option, use that first.

2. 2

   Include all relevant details in your first message

   To avoid back-and-forth that stretches across days, include: station location, charger ID (printed on the unit), time of the issue, what happened, and any error messages. Screenshots help.

3. 3

   Do not wait at a broken charger for support to respond

   If a charger is not working and support is not answering, move on. Report the issue through the app and drive to the next available charger from any network. Waiting at a broken charger hoping for a callback is not practical.

4. 4

   For billing disputes, document everything

   Screenshot your charging session details (from the app), note the charger ID and time, and save any error messages. If you were charged for a failed session, this documentation helps you get a refund when support responds.