EnergyVision Charger Not Working?

Symptoms

• The charger unit has no payment terminal or card reader
• You do not have the EnergyVision app installed
• The app will not connect to the charger or keeps loading
• You have no mobile data at the station location

How to Fix It

1. 1

   Install and set up the EnergyVision app before you travel

   Create your account and add a payment method at home, on a reliable internet connection. Do not try to set up the app for the first time at a station with weak signal.

2. 2

   Download the station list or map for offline reference

   If the app supports offline viewing of station locations, download the map or take screenshots of the stations along your route. This way you can navigate to a station even without signal.

3. 3

   Try switching between Wi-Fi and mobile data

   Some apps struggle with certain network configurations. Toggle your phone's Wi-Fi off (or on, if a nearby network is available) and try again. Sometimes a network switch forces the app to reconnect.

4. 4

   Restart the app and your phone

   Close the app completely (not just minimize), reopen it, and try again. If that fails, restart your phone. App-only chargers make your phone a critical piece of charging infrastructure.

5. 5

   Have a backup charging app ready

   With any app-only network, especially a smaller one, always carry a second charging app from a larger network. If EnergyVision's app is down, you need to find an alternative charger from another operator.

Symptoms

• The app shows very few stations along your route
• The nearest EnergyVision station is 50 km or more away
• You arrived at the only EnergyVision station in the area and it is out of order
• There is no second EnergyVision charger to fall back to

How to Fix It

1. 1

   Never rely on EnergyVision as your only charging option

   Plan your route with at least one alternative network at each stop. EnergyVision stations are a bonus when they work, but their spacing means you cannot depend on them exclusively.

2. 2

   Install apps for larger networks in the same region

   Identify which major networks operate near EnergyVision stations (Ionity, Shell Recharge, Fastned, or regional operators). Install their apps so you can switch quickly if needed.

3. 3

   Use a multi-network route planner

   A Better Routeplanner (ABRP) or similar tools show chargers from all operators. Plan your stops based on all available chargers, not just one network. EnergyVision stations will appear where they exist.

4. 4

   Charge a little extra at reliable stations before entering sparse areas

   If your next stop is an EnergyVision station in an area with few alternatives, charge to 90% at the station before it instead of the usual 80%. The extra buffer gives you range to reach a different charger if the EnergyVision station is down.

Symptoms

• The charger at this station looks completely different from the last EnergyVision station you used
• The connector release mechanism works differently than expected
• The charger screen layout does not match what you see in the app
• Error codes or messages are in a different format than at other EnergyVision stations

How to Fix It

1. 1

   Check the charger unit for basic instructions

   Most charger manufacturers print basic instructions on the unit itself: where to plug in, how to release the connector, and where the emergency stop button is. Take a moment to read these, as they vary between manufacturers.

2. 2

   Start the session through the app, not the charger screen

   Regardless of the charger hardware, the EnergyVision app is the consistent interface. Start and stop sessions through the app. The charger screen is secondary.

3. 3

   If the connector release is different, check for a button or lever

   Some charger manufacturers use a push-button release, others use a lever, and some release automatically when the session ends. Look at the connector handle and the charger unit for release instructions.

4. 4

   Report hardware-specific problems in the app

   If a charger unit from a specific manufacturer is repeatedly problematic, report it through the EnergyVision app. Include details about what happened so the support team can pass it to the hardware vendor.

Symptoms

• You search for 'EnergyVision' in your app store and no results appear
• The app is listed but marked as 'not available in your country'
• You found the app but it will not install on your phone model
• A link to the app store listing leads to a 'not found' page

How to Fix It

1. 1

   Check the EnergyVision website for the correct app name and link

   The app may be listed under a slightly different name in some app stores. Visit the EnergyVision website on your phone and look for a direct download link that opens the correct store listing.

2. 2

   Check your app store country setting

   If your App Store or Google Play account is set to a country where EnergyVision does not operate, the app may be hidden. You can check this in your store account settings.

3. 3

   Check if a roaming app supports EnergyVision stations

   Some roaming platforms include smaller networks. Search for the station location in a roaming app (like Chargemap or Octopus Electroverse) to see if you can start a session through a third-party app instead.

4. 4

   Contact EnergyVision support for alternative access

   If you cannot install the app, contact EnergyVision through their website. They may have a web-based session starter or be able to suggest a roaming provider that includes their stations.

Symptoms

• You reported an issue through the app and have not heard back
• The support phone number goes to voicemail or has limited hours
• You need help at a station but cannot reach anyone
• Your email to support has not been answered after several days

How to Fix It

1. 1

   Use the app's support feature for the fastest response

   In-app support requests typically get prioritized over emails sent to a general address. If the app has a help, chat, or report issue option, use that first.

2. 2

   Include all relevant details in your first message

   To avoid back-and-forth that stretches across days, include: station location, charger ID (printed on the unit), time of the issue, what happened, and any error messages. Screenshots help.

3. 3

   Do not wait at a broken charger for support to respond

   If a charger is not working and support is not answering, move on. Report the issue through the app and drive to the next available charger from any network. Waiting at a broken charger hoping for a callback is not practical.

4. 4

   For billing disputes, document everything

   Screenshot your charging session details (from the app), note the charger ID and time, and save any error messages. If you were charged for a failed session, this documentation helps you get a refund when support responds.