Smart #1 Charging at Lidl Charging

Smart #1 Pro Plus Charger Will Not Start a Session

You plugged the connector into your Smart #1, but the charger is not responding. No charging indicator, no session starting, nothing happening. This is almost always a charger-side or authentication issue, not a problem with the car. Let us work through it.

Symptoms

• The CCS2 or Type 2 connector is in but nothing happens
• The charger screen shows an error or stays on the welcome screen
• The Smart #1 dashboard does not show a charging session
• You hear the connector lock but charging does not begin
• The charging app shows the charger as available even though you are plugged in

What to Do

1. 1

   Authenticate with the charger first

   Tap your RFID card, open the charging network app, or use contactless payment on the charger. Wait for the charger screen to confirm the session before plugging in.

2. 2

   Remove and reinsert the connector

   Unlock the connector (press the button on the charger handle), remove it fully, wait 10 seconds, then push it back in firmly until it clicks and locks.

3. 3

   Lock and unlock the car

   Use the key fob or Smart app to lock the car, wait 15 seconds, then unlock it. This can reset the charging system if it is in a fault state.

4. 4

   Check the charge port for ice or debris

   Open the charge port flap on the rear left of the Smart #1 and inspect it. In winter, warm the port gently with your hands or use lukewarm water if ice is present. Never use hot water.

5. 5

   Restart the infotainment system

   Press and hold the power button on the center screen for 10 seconds to restart the system. Wait for it to boot fully, then try plugging in again.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Move to another charger at the station or a different location.

Smart #1 Pro Plus Payment Failed at Charging Station

You are ready to charge your Smart #1, but the payment will not go through. The RFID card does not register, the app gives an error, or your bank card gets declined. This is a charger and payment issue, not a car issue. Here is what to do.

Symptoms

• RFID card tap does nothing at the charger
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• Charger displays a payment error code
• Session starts but stops immediately with a billing message

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the stickers and screen on the charger for accepted networks, apps, and card types. If your payment method is not listed, you need to try something else.

2. 2

   Switch to a different payment method

   Try a different RFID card, a different charging app, or a contactless bank card. Having multiple options is essential for public charging in Europe.

3. 3

   Check your available balance

   Open your banking app and verify you have at least 80 EUR available to cover the pre-authorization hold. If not, use a card with a higher balance.

4. 4

   Hold the RFID card steadily

   Place the RFID card flat against the reader and hold it for 2-3 seconds. Do not tap and remove quickly. Some readers are slow to respond.

5. 5

   Cancel and retry the session

   If a previous attempt is stuck, cancel it through the app first. Wait a minute, then start a fresh session from scratch.

6. 6

   Try the other charger unit

   If the payment hardware is faulty on one unit, the neighboring charger at the same station may work fine.

Smart #1 Pro Plus Charging Slower Than Expected Speed

Your Smart #1 should charge at up to 150 kW on DC and 22 kW on AC, but the numbers on the screen tell a different story. Maybe you are stuck at 40 kW on a fast charger, or your wallbox is only delivering 7 kW. Here is what is going on and how to fix it.

Symptoms

• DC fast charging well below the 150 kW maximum
• AC charging stuck at 7 or 11 kW instead of 22 kW
• Charging speed drops sharply after 50-60% state of charge
• The dashboard shows lower power than the charger rating
• Charging from 10% to 80% takes much longer than the advertised 30 minutes

What to Do

1. 1

   Use navigation to activate preconditioning

   Set the DC charger as your destination in the Smart #1's built-in navigation. This activates battery preconditioning, warming or cooling the battery to the ideal temperature before you arrive.

2. 2

   Check your state of charge

   If you are above 60%, the slower speed is expected. For the fastest DC charging, arrive between 10-20% and charge to 80%.

3. 3

   Verify the charger's actual output

   Check the charger display for its rated power. If it says 50 kW, that is your maximum regardless of the Smart #1's 150 kW capability. Look for chargers rated 150 kW or higher.

4. 4

   Check if the charger is shared

   If another car is using the adjacent connector on the same charger unit, you may be sharing power. Move to a charger with no other user if possible.

5. 5

   For AC, verify three-phase connection

   To get 22 kW AC, your wallbox must be wired for three-phase at 32A. Check with your electrician. If you only have single-phase, the maximum is about 7.4 kW.

6. 6

   Try a different charger

   If speeds are still low after checking everything, the charger may be degraded. Try another charger at the same station or a different location.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.