Smart #1 Charging at Iberdrola

Smart #1 Pro Plus Charger Will Not Start a Session

You plugged the connector into your Smart #1, but the charger is not responding. No charging indicator, no session starting, nothing happening. This is almost always a charger-side or authentication issue, not a problem with the car. Let us work through it.

Symptoms

• The CCS2 or Type 2 connector is in but nothing happens
• The charger screen shows an error or stays on the welcome screen
• The Smart #1 dashboard does not show a charging session
• You hear the connector lock but charging does not begin
• The charging app shows the charger as available even though you are plugged in

What to Do

1. 1

   Authenticate with the charger first

   Tap your RFID card, open the charging network app, or use contactless payment on the charger. Wait for the charger screen to confirm the session before plugging in.

2. 2

   Remove and reinsert the connector

   Unlock the connector (press the button on the charger handle), remove it fully, wait 10 seconds, then push it back in firmly until it clicks and locks.

3. 3

   Lock and unlock the car

   Use the key fob or Smart app to lock the car, wait 15 seconds, then unlock it. This can reset the charging system if it is in a fault state.

4. 4

   Check the charge port for ice or debris

   Open the charge port flap on the rear left of the Smart #1 and inspect it. In winter, warm the port gently with your hands or use lukewarm water if ice is present. Never use hot water.

5. 5

   Restart the infotainment system

   Press and hold the power button on the center screen for 10 seconds to restart the system. Wait for it to boot fully, then try plugging in again.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Move to another charger at the station or a different location.

Smart #1 Pro Plus Payment Failed at Charging Station

You are ready to charge your Smart #1, but the payment will not go through. The RFID card does not register, the app gives an error, or your bank card gets declined. This is a charger and payment issue, not a car issue. Here is what to do.

Symptoms

• RFID card tap does nothing at the charger
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• Charger displays a payment error code
• Session starts but stops immediately with a billing message

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the stickers and screen on the charger for accepted networks, apps, and card types. If your payment method is not listed, you need to try something else.

2. 2

   Switch to a different payment method

   Try a different RFID card, a different charging app, or a contactless bank card. Having multiple options is essential for public charging in Europe.

3. 3

   Check your available balance

   Open your banking app and verify you have at least 80 EUR available to cover the pre-authorization hold. If not, use a card with a higher balance.

4. 4

   Hold the RFID card steadily

   Place the RFID card flat against the reader and hold it for 2-3 seconds. Do not tap and remove quickly. Some readers are slow to respond.

5. 5

   Cancel and retry the session

   If a previous attempt is stuck, cancel it through the app first. Wait a minute, then start a fresh session from scratch.

6. 6

   Try the other charger unit

   If the payment hardware is faulty on one unit, the neighboring charger at the same station may work fine.

Smart #1 Pro Plus Charging Slower Than Expected Speed

Your Smart #1 should charge at up to 150 kW on DC and 22 kW on AC, but the numbers on the screen tell a different story. Maybe you are stuck at 40 kW on a fast charger, or your wallbox is only delivering 7 kW. Here is what is going on and how to fix it.

Symptoms

• DC fast charging well below the 150 kW maximum
• AC charging stuck at 7 or 11 kW instead of 22 kW
• Charging speed drops sharply after 50-60% state of charge
• The dashboard shows lower power than the charger rating
• Charging from 10% to 80% takes much longer than the advertised 30 minutes

What to Do

1. 1

   Use navigation to activate preconditioning

   Set the DC charger as your destination in the Smart #1's built-in navigation. This activates battery preconditioning, warming or cooling the battery to the ideal temperature before you arrive.

2. 2

   Check your state of charge

   If you are above 60%, the slower speed is expected. For the fastest DC charging, arrive between 10-20% and charge to 80%.

3. 3

   Verify the charger's actual output

   Check the charger display for its rated power. If it says 50 kW, that is your maximum regardless of the Smart #1's 150 kW capability. Look for chargers rated 150 kW or higher.

4. 4

   Check if the charger is shared

   If another car is using the adjacent connector on the same charger unit, you may be sharing power. Move to a charger with no other user if possible.

5. 5

   For AC, verify three-phase connection

   To get 22 kW AC, your wallbox must be wired for three-phase at 32A. Check with your electrician. If you only have single-phase, the maximum is about 7.4 kW.

6. 6

   Try a different charger

   If speeds are still low after checking everything, the charger may be degraded. Try another charger at the same station or a different location.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.