MG MG4 Charging at Lidl Charging

MG MG4 Charger Won't Start? How to Fix It Now

You have plugged in your MG MG4 but nothing is happening. The charger light is blinking, the car is not responding, or you are getting an error message. This is frustrating, but most failed charging sessions have a simple fix. Let's walk through the common causes.

Symptoms

• Charger display shows an error code or red indicator
• CCS2 connector clicks in but charging does not begin
• Car dashboard shows no charging activity after plugging in
• Charger screen asks for authentication but does not accept your card or app
• Charging port light on the MG4 flashes or stays amber

What to Do

1. 1

   Check the charger screen for error messages

   Read any error codes or messages on the charger display. Common messages include 'authentication required,' 'connector error,' or 'out of service.' This tells you whether the problem is the charger or the car.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely, wait 10 seconds, and plug it back in firmly. Make sure you hear the click and the MG4's charge port light responds.

3. 3

   Authenticate again

   Re-tap your RFID card, restart the session in the app, or try contactless payment. Some chargers require you to authenticate before plugging in, others after. Try both sequences.

4. 4

   Disable scheduled charging

   On the MG4's infotainment screen, go to vehicle settings and check if scheduled charging is enabled. Turn it off temporarily to allow immediate charging.

5. 5

   Lock and unlock the car

   Use the MG4's key fob or the MG iSMART app to lock and then unlock the car. This can reset the charge port communication and clear temporary errors.

6. 6

   Try a different charger or stall

   If nothing works on this stall, try another one at the same station. If the entire station fails, the problem is likely the charger infrastructure, not your MG4.

MG MG4 Charging Payment Failed? Fix It Quickly

You are at a charger with your MG MG4 and the payment is not going through. Your card gets rejected, the app throws an error, or you cannot figure out how to pay at all. Payment issues are one of the most common reasons a charging session fails to start. Here is how to sort it out.

Symptoms

• RFID card tap does not register on the charger
• Charging app shows a payment error or insufficient funds
• Contactless bank card is declined at the charger terminal
• Charger asks for payment but you cannot find a method that works
• Session starts but stops immediately due to payment authorization failure

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the charger for logos showing accepted payment types: RFID, app, contactless card, QR code. Many chargers display the logos of compatible networks near the screen or card reader.

2. 2

   Try the network's app

   Scan the QR code on the charger or search for the network's app in your phone's app store. Many networks let you start a session through their app even without an RFID card.

3. 3

   Try a different payment method

   If your RFID card fails, try the app. If the app fails, try contactless. If you have a multi-network roaming card (like Plugsurfing or Shell Recharge), try that instead.

4. 4

   Check your card balance and bank notifications

   Open your banking app to check for declined transactions or pre-authorization holds. Contact your bank if the charger is trying to authorize a large hold that exceeds your available balance.

5. 5

   Use a roaming service

   If you do not have an account with this specific network, a roaming provider like Plugsurfing, Chargemap, or Shell Recharge may cover this charger. These services work across multiple networks with one card or app.

6. 6

   Find an alternative charger nearby

   If payment truly will not work, search for another charger nearby. Filter your charging app by your available payment methods to find a compatible station.

MG MG4 Charging Slowly? Causes and Quick Fixes

You plugged in your MG MG4 expecting fast charging, but the kW reading is disappointingly low. This is one of the most common frustrations for MG4 drivers, and it usually has a straightforward explanation. Here is what to check and how to get closer to the 142kW DC maximum your car supports.

Symptoms

• DC charging power showing well below 142kW on the charger display
• AC home or destination charging stuck below 11kW
• Estimated charging time much longer than expected
• Battery percentage climbing very slowly after 60-70% SOC
• Charging power drops significantly in cold weather

What to Do

1. 1

   Check the charger's rated power

   Look at the charger label or app to confirm its maximum output. If it is a 50kW unit, your MG4 cannot charge faster regardless of its 142kW capability.

2. 2

   Check your battery temperature and SOC

   On the MG4's instrument cluster, check your current state of charge. If you are above 70%, the taper is normal. In cold weather, use the preconditioning feature by setting the charger as your navigation destination.

3. 3

   Activate preconditioning via navigation

   Set the fast charger as your destination in the MG4's built-in navigation. This triggers battery preconditioning, warming the pack to an optimal temperature before you arrive.

4. 4

   Try a different CCS2 stall

   If the charger has multiple stalls, power may be shared between them. Try an adjacent stall or wait for other cars to finish. Some charging sites have dedicated high-power stalls.

5. 5

   Check your AC charging cable

   For AC charging, make sure you are using a cable rated for at least 11kW (3-phase, 16A). A single-phase cable limits you to about 3.6kW regardless of what the charger or car supports.

6. 6

   Verify no charging limit is set in the car

   In the MG4's settings, check if a charging current limit or maximum SOC limit has been set. A reduced AC charging current setting will cap your speed even on a capable charger.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.