Maxus eDeliver 3 Charging at REWE Charging

Maxus eDeliver 3 Charger Will Not Start Charging

You plugged in the CCS2 cable and nothing happened. Or the charger keeps showing an error. The eDeliver 3 is a solid delivery van, but as a less common brand in Europe, it can occasionally encounter compatibility issues with certain chargers. Most start failures come down to authentication, cable seating, or charger compatibility.

Symptoms

• CCS2 connector plugged in but charger shows no active session
• Charger displays an error code immediately after connecting
• Dashboard shows the charge port is connected but charging does not begin
• Cable does not lock into the CCS2 port on the eDeliver 3
• Charger starts the handshake but fails with a protocol error

What to Do

1. 1

   Remove and reseat the CCS2 connector

   Pull the connector out completely, wait 10 seconds, and push it back in firmly. Make sure it clicks and locks. Check the charge port for debris.

2. 2

   Turn the vehicle off and on

   Switch the eDeliver 3 fully off, wait 30 seconds, then turn it back on. Unplug and replug the cable. This resets the charging communication system.

3. 3

   Re-authenticate with the charger

   Cancel any active session in your charging app and start fresh. If using RFID, hold the card against the reader for a few seconds. Try authenticating before you plug in if the charger supports that flow.

4. 4

   Try a different charger brand

   If the eDeliver 3 will not start on this charger, try a different brand of charger. The eDeliver 3 may have better compatibility with some charger manufacturers. Note which ones work for future reference.

5. 5

   Check for software updates

   Contact your Maxus dealer or check the Maxus app. Software updates can fix charging compatibility issues. The Maxus service network in Europe is smaller, so plan service visits ahead of time.

6. 6

   Contact Maxus support

   If the eDeliver 3 consistently fails to start on multiple chargers, there may be a vehicle-side issue. Contact your Maxus dealer. Keep a log of which chargers failed and any error codes displayed.

Maxus eDeliver 3 Charging Payment Failed at DC

The charger is right there, your eDeliver 3 needs a charge, and the payment just failed. Payment issues at public chargers have nothing to do with your van. They are about the charging network, your card, or your phone signal. Here is how to get around it and get charging.

Symptoms

• Charger displays a payment error or 'transaction declined' message
• Charging app shows 'session failed to start' after payment attempt
• RFID card is not recognized by the charger reader
• Contactless bank card tap does not register
• Authorization starts but times out before the charger delivers power

What to Do

1. 1

   Try a different payment method

   Switch from RFID to app or from app to contactless bank card. Always carry at least two options so one failure does not leave you stranded.

2. 2

   Check your mobile signal

   If signal is weak, the app cannot complete the transaction. Step away from walls or structures and try again.

3. 3

   Verify your payment details

   Open the charging app and check that your card is valid and up to date. Update if the card has been replaced.

4. 4

   Check accepted networks on the charger

   Look for logos showing which networks and apps work at this charger. If yours is not listed, you need a different payment method or a different charger.

5. 5

   Contact your fleet manager

   If using a company RFID card that is not working, your manager can check if the card is active and has no restrictions. Most RFID cards have a support number printed on them.

6. 6

   Find a nearby alternative charger

   If payment is not working here, check your app for the next closest charger on your route. Move on rather than losing delivery time.

Maxus eDeliver 3 Charging Slower Than Expected

You stopped at a public charger expecting a quick top-up and the charger shows 15 kW instead of the 90 kW maximum. The eDeliver 3's 52.5 kWh battery can reach up to 90 kW on DC, but the actual speed depends on temperature, state of charge, and the charger. As a less common brand in Europe, the eDeliver 3 may also encounter occasional charger compatibility quirks. Here is what to check.

Symptoms

• DC fast charging speed well below the 90 kW maximum
• AC charging stuck at about 3 kW instead of the 7 kW maximum
• Charging speed drops sharply after reaching 50-60% on the dashboard
• Charging starts at a reasonable speed but slows down within minutes
• Charger display shows lower power than its rated output

What to Do

1. 1

   Check the battery temperature

   Look at the dashboard for battery temperature information. If the battery is cold, driving for 20-30 minutes before charging can help. The eDeliver 3 lacks preconditioning, so the battery warms up only through driving.

2. 2

   Check your state of charge

   Look at the battery percentage on the dashboard. If you are above 80%, the slower speed is normal. Arrive between 10-20% for the fastest DC charging speeds.

3. 3

   Verify the charger is not sharing power

   Look at the charger. If there are two cables and someone is using the other one, you may be sharing power. Move to an unoccupied charger if one is available.

4. 4

   Try a different charger brand

   If speeds are consistently low at one type of charger, try a different brand or network. The eDeliver 3 may work better with some charger manufacturers than others due to its less common charging firmware.

5. 5

   Check for vehicle software updates

   Contact your Maxus dealer or check the Maxus app for available software updates. Updates can improve charging compatibility and speeds. The Maxus service network is smaller, so this may require scheduling ahead.

6. 6

   Accept the AC limitation

   If your depot wallbox delivers 7 kW or less, you are already at the eDeliver 3's maximum AC rate. A 3-phase 11 kW or 22 kW wallbox will not charge faster than 7 kW on this van. Plan overnight charging accordingly.

Charger occupied by non-charging vehicles

You arrive at the REWE charger and a car is parked in the charging spot without being plugged in. This is common at supermarket locations where shoppers treat EV spots as regular parking.

Symptoms

• Charging spot is occupied by a car with no cable connected
• ICE vehicle parked in the EV charging bay
• Car is plugged in but session has clearly ended and the driver is inside shopping
• All charging spots taken despite the app showing the charger as available

How to Fix It

1. 1

   Check if the other car is actively charging

   Look at the charger display or connector. If the session has ended and the car is just parked, REWE cannot remotely move it. The app status reflects the charger, not the parking spot.

2. 2

   Ask at the REWE customer service desk

   REWE staff can sometimes make a store announcement asking the vehicle owner to move. This works more often than you would expect.

3. 3

   Wait briefly or shop first

   At supermarket chargers, turnover is high. Most shoppers leave within 30 to 45 minutes. Do your shopping and check again.

4. 4

   Check for additional REWE locations nearby

   Many German cities have multiple REWE stores with chargers within a short drive. Check the app for the next closest option.

Contactless card reader not responding

You tap your debit or credit card on the reader but nothing happens. The reader does not beep, does not show a light, or shows an error briefly before resetting.

Symptoms

• Card reader shows no response when you tap
• Reader beeps but the screen shows an error
• Card works at the REWE checkout inside but not at the charger
• Contactless symbol is visible on the reader but it seems inactive

How to Fix It

1. 1

   Hold your card flat against the reader for 3 to 5 seconds

   Some REWE charger readers are slower than store payment terminals. Hold the card still and wait for the full processing time.

2. 2

   Remove your phone and other cards from the area

   If you hold your wallet with multiple contactless cards near the reader, it may detect interference and reject the transaction.

3. 3

   Try the charging app instead

   If contactless is not working, start the session through the REWE charging partner app. This bypasses the physical card reader entirely.

4. 4

   Check if the reader is physically damaged

   Supermarket chargers are exposed to shopping carts, weather, and heavy foot traffic. If the reader looks cracked or the screen is damaged, report it to REWE staff inside and try another stall if available.

Session ends due to maximum stay time limit

Your charging session stops before the battery is full because REWE enforces a maximum parking time at the charging spot. This exists to keep spots available for other shoppers.

Symptoms

• Charging stops after 60 to 90 minutes even though the battery is not full
• App notification says session ended due to time limit
• You return from shopping to find the charger disconnected
• Charger screen shows session completed despite low battery level

How to Fix It

1. 1

   Check the posted time limit before you start

   REWE typically allows 60 to 120 minutes depending on the location. Look for signage near the charger or check the app for time restrictions at that specific store.

2. 2

   Plan your charge around your shopping time

   At up to 300 kW, most EVs can gain 150 to 250 km of range in 30 to 45 minutes. A normal grocery run is usually enough time for a meaningful charge.

3. 3

   Move your car if you need more time

   If you need a longer session, move your car to a regular parking spot after the time limit and start a new session if the charger is free when you return.

4. 4

   Use REWE chargers for top-ups, not full charges

   Supermarket chargers work best for adding range while you shop, not for charging from 10% to 100%. If you need a full charge, plan for a dedicated fast charging station.

Poor mobile signal in underground or garage parking

Some REWE stores have chargers in basement or covered parking areas where mobile signal is weak. This can prevent the app from starting a session or processing contactless payments.

Symptoms

• App shows 'No connection' or spins without loading
• Contactless payment times out during processing
• You cannot scan the QR code on the charger because the page will not load
• Session starts but the app loses connection and cannot show charging status

How to Fix It

1. 1

   Connect to REWE store WiFi if available

   Many REWE stores offer free WiFi that may reach the parking area. Check for a REWE network in your phone's WiFi settings.

2. 2

   Walk closer to the garage entrance to start the session

   If you need the app to start the session, walk toward the exit where signal is stronger, start the session remotely, then return to your car.

3. 3

   Use contactless payment instead of the app

   Contactless card payments are processed through the charger's built-in connection, not your phone. If the card reader works, you do not need mobile signal.

4. 4

   Pre-load the app before entering the garage

   Open the app and navigate to the station page while you still have signal. Some apps cache enough data to start a session even with intermittent connectivity.

Charger unavailable outside store hours

You arrive at a REWE charger outside store opening hours and the charger is inaccessible or powered down. Some locations gate their parking areas or shut down chargers when the store closes.

Symptoms

• Parking area gate is locked and you cannot reach the charger
• Charger screen is dark and does not respond
• App shows the charger as available but the physical location is closed
• Barrier arm blocks entry to the parking lot after closing time

How to Fix It

1. 1

   Check store hours before planning a charge

   REWE stores in Germany typically close between 20:00 and 22:00 on weekdays and earlier on Saturdays. Most are closed on Sundays. If the charger is behind a gate, you cannot access it outside these hours.

2. 2

   Verify 24/7 access in the app

   Some REWE charging locations offer 24/7 access even when the store is closed. Check the station details in the app. If it does not mention 24-hour access, assume it follows store hours.

3. 3

   Leave the parking area before the store closes

   If you are charging and the store is about to close, make sure you can exit the parking area. Some locations lock the barrier after closing, which could trap your car overnight.

4. 4

   Find an alternative nearby charger

   Use a multi-network app like Chargemap or the EVcourse charger finder to locate a 24/7 charger nearby. Dedicated charging stations along main roads usually operate around the clock.