Mercedes eVito Charging at REWE Charging

Mercedes eVito Van Charger Will Not Start a Session

You have connected the charger to your Mercedes eVito and nothing is happening. No session, no power, no charging light. When you are between jobs or trying to charge at the depot, you need this resolved quickly. Here is how.

Symptoms

• CCS2 or Type 2 connector is plugged in but no session starts
• The MBUX display does not show charging activity
• The charger screen shows an error after plug-in
• The charge port indicator stays off or flashes amber
• The depot wallbox status light does not change when plugged in

What to Do

1. 1

   Authenticate before plugging in

   At public chargers, tap your RFID card or start the session in the app before inserting the connector. Wait for the charger to confirm it is ready.

2. 2

   Clean and reinsert the connector

   Remove the connector, wipe the charge port on the eVito with a dry cloth to remove any dirt, then reinsert the connector firmly until it clicks.

3. 3

   Check MBUX charging settings

   On the MBUX display, navigate to the charging menu. Check if departure time charging is active. Disable it for immediate charging.

4. 4

   Check the depot electrical panel

   If at the depot, check the circuit breaker for the charging circuit. Also check the wallbox status indicator. Report issues to your fleet manager.

5. 5

   Lock and unlock the van

   Use the key to lock the eVito, wait 20 seconds, then unlock. This can reset the charging electronics after a fault state.

6. 6

   Move to a different charger

   If the charger is faulty, do not waste time. Move to another unit or station, especially if you are mid-route.

Mercedes eVito Van Payment Failed at Charging Station

You are at a public charger with your Mercedes eVito and the payment will not go through. Whether it is a fleet card, personal RFID, or an app, payment failures at public chargers waste time between jobs. Here is how to resolve it fast.

Symptoms

• Fleet card does not start a session at the charger
• RFID card tap produces no response
• Charging app shows a payment authorization error
• Contactless bank card is declined
• Charger shows 'payment failed' on the screen

What to Do

1. 1

   Check accepted payment methods

   Look at the charger stickers and screen for accepted networks and cards. If your fleet card logo is not shown, this charger is not on your network.

2. 2

   Try a different payment method

   Switch between fleet card, personal RFID, charging app, and contactless bank card. One may work where others fail.

3. 3

   Verify fleet card status

   Contact your fleet manager or check the fleet card provider app to confirm the card is active and has not hit a spending limit.

4. 4

   Hold the card steadily

   Place the card flat against the reader for 3 seconds. Do not tap and pull away quickly. Gloves can interfere with NFC reading.

5. 5

   Cancel and retry

   Cancel any pending session in the app, wait 60 seconds, and start a fresh attempt.

6. 6

   Move to another charger unit

   If the payment reader on this unit is broken, try the next charger at the station. Do not waste time troubleshooting hardware you cannot fix.

Mercedes eVito Van Charging Slower Than Expected Speed

Your Mercedes eVito is charging slower than the 110 kW DC maximum. Or your depot wallbox is barely delivering power overnight. Without battery preconditioning, the eVito is especially sensitive to cold weather. Here is what to check and how to improve your charging speed.

Symptoms

• DC fast charging well below the 110 kW maximum
• Depot AC charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops quickly after 40-50% state of charge
• Winter charging starts extremely slowly
• Mid-route DC charging takes too long between jobs

What to Do

1. 1

   Drive before charging in cold weather

   Since the eVito lacks preconditioning, drive for at least 20-30 minutes before stopping at a DC charger in winter. This warms the battery through use.

2. 2

   Charge between 20-50% for fastest speeds

   Plan your mid-route charging stops to arrive between 20-50% state of charge. This is where the eVito can approach its 110 kW peak.

3. 3

   Check your depot charger wiring

   Ask your fleet manager or electrician to verify the depot wallbox is wired for three-phase at 16A per phase for 11 kW. Single-phase installations are common but much slower.

4. 4

   Choose unshared DC chargers

   At public stations, check if the charger is sharing power. If another vehicle is on the paired connector, try a different unit.

5. 5

   Use MBUX to check charging status

   The MBUX infotainment system shows current charging power and estimated time. Use this to verify speeds and decide if you should move to a different charger.

6. 6

   Try a different charger

   If speeds remain well below expected at a low state of charge, the charger may be faulty. Move to another unit.

Charger occupied by non-charging vehicles

You arrive at the REWE charger and a car is parked in the charging spot without being plugged in. This is common at supermarket locations where shoppers treat EV spots as regular parking.

Symptoms

• Charging spot is occupied by a car with no cable connected
• ICE vehicle parked in the EV charging bay
• Car is plugged in but session has clearly ended and the driver is inside shopping
• All charging spots taken despite the app showing the charger as available

How to Fix It

1. 1

   Check if the other car is actively charging

   Look at the charger display or connector. If the session has ended and the car is just parked, REWE cannot remotely move it. The app status reflects the charger, not the parking spot.

2. 2

   Ask at the REWE customer service desk

   REWE staff can sometimes make a store announcement asking the vehicle owner to move. This works more often than you would expect.

3. 3

   Wait briefly or shop first

   At supermarket chargers, turnover is high. Most shoppers leave within 30 to 45 minutes. Do your shopping and check again.

4. 4

   Check for additional REWE locations nearby

   Many German cities have multiple REWE stores with chargers within a short drive. Check the app for the next closest option.

Contactless card reader not responding

You tap your debit or credit card on the reader but nothing happens. The reader does not beep, does not show a light, or shows an error briefly before resetting.

Symptoms

• Card reader shows no response when you tap
• Reader beeps but the screen shows an error
• Card works at the REWE checkout inside but not at the charger
• Contactless symbol is visible on the reader but it seems inactive

How to Fix It

1. 1

   Hold your card flat against the reader for 3 to 5 seconds

   Some REWE charger readers are slower than store payment terminals. Hold the card still and wait for the full processing time.

2. 2

   Remove your phone and other cards from the area

   If you hold your wallet with multiple contactless cards near the reader, it may detect interference and reject the transaction.

3. 3

   Try the charging app instead

   If contactless is not working, start the session through the REWE charging partner app. This bypasses the physical card reader entirely.

4. 4

   Check if the reader is physically damaged

   Supermarket chargers are exposed to shopping carts, weather, and heavy foot traffic. If the reader looks cracked or the screen is damaged, report it to REWE staff inside and try another stall if available.

Session ends due to maximum stay time limit

Your charging session stops before the battery is full because REWE enforces a maximum parking time at the charging spot. This exists to keep spots available for other shoppers.

Symptoms

• Charging stops after 60 to 90 minutes even though the battery is not full
• App notification says session ended due to time limit
• You return from shopping to find the charger disconnected
• Charger screen shows session completed despite low battery level

How to Fix It

1. 1

   Check the posted time limit before you start

   REWE typically allows 60 to 120 minutes depending on the location. Look for signage near the charger or check the app for time restrictions at that specific store.

2. 2

   Plan your charge around your shopping time

   At up to 300 kW, most EVs can gain 150 to 250 km of range in 30 to 45 minutes. A normal grocery run is usually enough time for a meaningful charge.

3. 3

   Move your car if you need more time

   If you need a longer session, move your car to a regular parking spot after the time limit and start a new session if the charger is free when you return.

4. 4

   Use REWE chargers for top-ups, not full charges

   Supermarket chargers work best for adding range while you shop, not for charging from 10% to 100%. If you need a full charge, plan for a dedicated fast charging station.

Poor mobile signal in underground or garage parking

Some REWE stores have chargers in basement or covered parking areas where mobile signal is weak. This can prevent the app from starting a session or processing contactless payments.

Symptoms

• App shows 'No connection' or spins without loading
• Contactless payment times out during processing
• You cannot scan the QR code on the charger because the page will not load
• Session starts but the app loses connection and cannot show charging status

How to Fix It

1. 1

   Connect to REWE store WiFi if available

   Many REWE stores offer free WiFi that may reach the parking area. Check for a REWE network in your phone's WiFi settings.

2. 2

   Walk closer to the garage entrance to start the session

   If you need the app to start the session, walk toward the exit where signal is stronger, start the session remotely, then return to your car.

3. 3

   Use contactless payment instead of the app

   Contactless card payments are processed through the charger's built-in connection, not your phone. If the card reader works, you do not need mobile signal.

4. 4

   Pre-load the app before entering the garage

   Open the app and navigate to the station page while you still have signal. Some apps cache enough data to start a session even with intermittent connectivity.

Charger unavailable outside store hours

You arrive at a REWE charger outside store opening hours and the charger is inaccessible or powered down. Some locations gate their parking areas or shut down chargers when the store closes.

Symptoms

• Parking area gate is locked and you cannot reach the charger
• Charger screen is dark and does not respond
• App shows the charger as available but the physical location is closed
• Barrier arm blocks entry to the parking lot after closing time

How to Fix It

1. 1

   Check store hours before planning a charge

   REWE stores in Germany typically close between 20:00 and 22:00 on weekdays and earlier on Saturdays. Most are closed on Sundays. If the charger is behind a gate, you cannot access it outside these hours.

2. 2

   Verify 24/7 access in the app

   Some REWE charging locations offer 24/7 access even when the store is closed. Check the station details in the app. If it does not mention 24-hour access, assume it follows store hours.

3. 3

   Leave the parking area before the store closes

   If you are charging and the store is about to close, make sure you can exit the parking area. Some locations lock the barrier after closing, which could trap your car overnight.

4. 4

   Find an alternative nearby charger

   Use a multi-network app like Chargemap or the EVcourse charger finder to locate a 24/7 charger nearby. Dedicated charging stations along main roads usually operate around the clock.