Hyundai Kona Electric Charging at Be Charge

Hyundai Kona Electric Charger Won't Start? Fix Guide

You have plugged the cable into your Kona Electric, but nothing is happening. No charging indicator, no progress on the screen. The Kona Electric's charge port is in the front, under a flap on the nose of the car. This unusual location sometimes causes cable reach problems. But the issue is usually authentication, a car setting, or the charger itself.

Symptoms

• CCS2 or Type 2 cable plugged in but no charging indicator on the dashboard
• Charge port LED stays off or flashes an error pattern
• Charger screen shows an error or stays on the start screen
• Bluelink app shows the car is not connected to a charger
• Charging begins briefly then stops within seconds

What to Do

1. 1

   Open the front charge port and check the cable

   The charge port is on the front of the car, under a flap. Press the flap to open it. If it is stiff, press more firmly. Insert the CCS2 connector straight in until you hear a click. The LED should light up.

2. 2

   Make sure you are parked nose-in

   Unlike most EVs with rear charge ports, the Kona Electric needs to face the charger. If you backed in, the cable probably will not reach. Pull out and park nose-first.

3. 3

   Authenticate with the charger

   Tap your RFID card, use the charging network's app, or try contactless payment. The Kona Electric does not have Plug & Charge, so you will always need to authenticate manually at DC fast chargers.

4. 4

   Check for a charging schedule

   On the infotainment screen, go to EV settings, then Scheduled Charging. Disable any active schedule or tap 'Charge Now' to override it.

5. 5

   Unplug, wait 30 seconds, and try again

   Remove the cable, wait 30 seconds, reconnect, and re-authenticate. This resets both the car and charger communication.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Try another stall or station. Report the broken charger through the network's app.

Hyundai Kona Electric Charger Payment Failed at Station

You are at a public charger with your Kona Electric, the cable is in, but payment will not go through. The charger shows an error, the app is not cooperating, or your RFID card gets no response. The Kona Electric does not support Plug & Charge, so you always need to authenticate manually. Here is how to work through payment problems.

Symptoms

• Charger screen shows 'payment failed' or 'authorization error'
• RFID card tapped but the charger does not respond
• Charging network app shows an error or hangs during payment
• Contactless card payment declined at the charger terminal
• QR code on the charger leads to a page that will not load

What to Do

1. 1

   Try a different payment method

   If RFID failed, open the charging app. If the app failed, try contactless with a credit or debit card. Having multiple options is the fastest way past payment issues.

2. 2

   Check your charging app account

   Open the app and verify your payment method is valid. Look for expired cards, low prepaid balances, or account restrictions. Update your card details if needed.

3. 3

   Scan the QR code on the charger

   Many chargers have a QR code that opens a web-based payment page. This lets you pay without an account or app. Scan it with your phone camera.

4. 4

   Try a different stall at the same station

   If one charger's payment terminal is broken, the next one over may work fine. Walk to the next stall and try the same payment method.

5. 5

   Try a different charging station

   If all stalls at this location have payment issues, the entire station may have a connectivity problem. Head to a nearby alternative station.

Hyundai Kona Electric Charging Slower Than Expected

The Kona Electric supports up to 100 kW DC fast charging, which is solid but noticeably slower than the 233 kW that 800V Hyundai models can reach. If your Kona is pulling 30 kW at a charger rated for much more, something is off. In most cases, slow charging comes down to battery temperature, state of charge, or the charger not delivering its full rated output.

Symptoms

• DC fast charging speed well below the 100 kW maximum
• AC charging stuck at 3-4 kW instead of 11 kW on a 3-phase connection
• Charging speed drops significantly above 60% state of charge
• Session starts at low power and never ramps up to full speed
• Charger screen shows a lower power output than the unit's rated capacity

What to Do

1. 1

   Check the battery temperature

   Look at the charging information on the 12.3-inch touchscreen. If the battery is cold, use the preconditioning feature in the Bluelink app before arriving at the charger. Driving for 15-20 minutes also warms the battery naturally.

2. 2

   Check your state of charge

   If you are above 70%, the slowdown is expected on the Kona Electric. For road trip charging, plan to arrive between 10-20% and unplug at 80% for the best time-to-range ratio.

3. 3

   Check the charger's rated output

   Look at the charger's specs on its screen, on the unit label, or in the charging network's app. If it is a 50 kW charger, the Kona Electric is getting what the charger can deliver. Find a higher-powered CCS2 charger for faster sessions.

4. 4

   Check scheduled charging and charge limits

   On the infotainment screen or in the Bluelink app, make sure scheduled charging is not delaying or limiting the session. Check that the charge current limit is set to maximum.

5. 5

   Check if the charger is sharing power

   Look at the charger cabinet. If two cables come from the same unit and someone is charging on the other cable, you may be splitting power. Move to an unoccupied charger if available.

6. 6

   Try a different charger or station

   If speed is still low after checking everything, the charger may be underperforming. Try another stall or a different station entirely.