Hyundai Kona Electric Charging at Fastned

Hyundai Kona Electric Charger Won't Start? Fix Guide

You have plugged the cable into your Kona Electric, but nothing is happening. No charging indicator, no progress on the screen. The Kona Electric's charge port is in the front, under a flap on the nose of the car. This unusual location sometimes causes cable reach problems. But the issue is usually authentication, a car setting, or the charger itself.

Symptoms

• CCS2 or Type 2 cable plugged in but no charging indicator on the dashboard
• Charge port LED stays off or flashes an error pattern
• Charger screen shows an error or stays on the start screen
• Bluelink app shows the car is not connected to a charger
• Charging begins briefly then stops within seconds

What to Do

1. 1

   Open the front charge port and check the cable

   The charge port is on the front of the car, under a flap. Press the flap to open it. If it is stiff, press more firmly. Insert the CCS2 connector straight in until you hear a click. The LED should light up.

2. 2

   Make sure you are parked nose-in

   Unlike most EVs with rear charge ports, the Kona Electric needs to face the charger. If you backed in, the cable probably will not reach. Pull out and park nose-first.

3. 3

   Authenticate with the charger

   Tap your RFID card, use the charging network's app, or try contactless payment. The Kona Electric does not have Plug & Charge, so you will always need to authenticate manually at DC fast chargers.

4. 4

   Check for a charging schedule

   On the infotainment screen, go to EV settings, then Scheduled Charging. Disable any active schedule or tap 'Charge Now' to override it.

5. 5

   Unplug, wait 30 seconds, and try again

   Remove the cable, wait 30 seconds, reconnect, and re-authenticate. This resets both the car and charger communication.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Try another stall or station. Report the broken charger through the network's app.

Hyundai Kona Electric Charger Payment Failed at Station

You are at a public charger with your Kona Electric, the cable is in, but payment will not go through. The charger shows an error, the app is not cooperating, or your RFID card gets no response. The Kona Electric does not support Plug & Charge, so you always need to authenticate manually. Here is how to work through payment problems.

Symptoms

• Charger screen shows 'payment failed' or 'authorization error'
• RFID card tapped but the charger does not respond
• Charging network app shows an error or hangs during payment
• Contactless card payment declined at the charger terminal
• QR code on the charger leads to a page that will not load

What to Do

1. 1

   Try a different payment method

   If RFID failed, open the charging app. If the app failed, try contactless with a credit or debit card. Having multiple options is the fastest way past payment issues.

2. 2

   Check your charging app account

   Open the app and verify your payment method is valid. Look for expired cards, low prepaid balances, or account restrictions. Update your card details if needed.

3. 3

   Scan the QR code on the charger

   Many chargers have a QR code that opens a web-based payment page. This lets you pay without an account or app. Scan it with your phone camera.

4. 4

   Try a different stall at the same station

   If one charger's payment terminal is broken, the next one over may work fine. Walk to the next stall and try the same payment method.

5. 5

   Try a different charging station

   If all stalls at this location have payment issues, the entire station may have a connectivity problem. Head to a nearby alternative station.

Hyundai Kona Electric Charging Slower Than Expected

The Kona Electric supports up to 100 kW DC fast charging, which is solid but noticeably slower than the 233 kW that 800V Hyundai models can reach. If your Kona is pulling 30 kW at a charger rated for much more, something is off. In most cases, slow charging comes down to battery temperature, state of charge, or the charger not delivering its full rated output.

Symptoms

• DC fast charging speed well below the 100 kW maximum
• AC charging stuck at 3-4 kW instead of 11 kW on a 3-phase connection
• Charging speed drops significantly above 60% state of charge
• Session starts at low power and never ramps up to full speed
• Charger screen shows a lower power output than the unit's rated capacity

What to Do

1. 1

   Check the battery temperature

   Look at the charging information on the 12.3-inch touchscreen. If the battery is cold, use the preconditioning feature in the Bluelink app before arriving at the charger. Driving for 15-20 minutes also warms the battery naturally.

2. 2

   Check your state of charge

   If you are above 70%, the slowdown is expected on the Kona Electric. For road trip charging, plan to arrive between 10-20% and unplug at 80% for the best time-to-range ratio.

3. 3

   Check the charger's rated output

   Look at the charger's specs on its screen, on the unit label, or in the charging network's app. If it is a 50 kW charger, the Kona Electric is getting what the charger can deliver. Find a higher-powered CCS2 charger for faster sessions.

4. 4

   Check scheduled charging and charge limits

   On the infotainment screen or in the Bluelink app, make sure scheduled charging is not delaying or limiting the session. Check that the charge current limit is set to maximum.

5. 5

   Check if the charger is sharing power

   Look at the charger cabinet. If two cables come from the same unit and someone is charging on the other cable, you may be splitting power. Move to an unoccupied charger if available.

6. 6

   Try a different charger or station

   If speed is still low after checking everything, the charger may be underperforming. Try another stall or a different station entirely.

Autocharge not recognizing your vehicle

You have Autocharge set up in the Fastned app, but when you plug in, the charger asks for payment instead of starting automatically.

Symptoms

• Charger screen prompts for app or card payment after plugging in
• Screen shows 'Vehicle not recognized' or goes straight to the payment screen
• Autocharge worked at other Fastned stations but not this one
• You recently changed your vehicle or payment method in the Fastned app

How to Fix It

1. 1

   Check Autocharge status in the Fastned app

   Open the Fastned app, go to your account or Autocharge settings, and verify that Autocharge is toggled on and linked to your current vehicle. If you switched vehicles recently, you may need to re-register the new one.

2. 2

   Unplug, wait 15 seconds, and plug in again

   The Autocharge handshake happens in the first few seconds. If the timing was off or the connector was not fully seated, the charger defaults to manual payment. Try again with a firm, steady plug-in.

3. 3

   Make sure your payment method is valid

   Autocharge bills your saved payment method automatically. If the card on file has expired or been blocked, Autocharge will fail even though your vehicle is recognized. Update your payment details in the Fastned app.

4. 4

   Verify your vehicle supports Autocharge

   Autocharge requires the vehicle to transmit a unique identifier through the charging cable (MAC address). Most newer EVs support this, but some older models or specific firmware versions do not. Check Fastned's website for a compatibility list.

5. 5

   Start the session via the app as a workaround

   If Autocharge is not cooperating, open the Fastned app, select the station and charger, and start the session manually. You will still get your Gold Member or regular pricing.

Contactless card reader not responding

You tap your debit or credit card on the contactless reader, but nothing happens. No beep, no screen change, no error.

Symptoms

• No response from the reader when tapping a card
• Reader beeps but the screen shows 'Transaction failed'
• Card works at shops and other chargers but not at this Fastned station
• Apple Pay or Google Pay does not trigger the reader

How to Fix It

1. 1

   Locate the correct reader

   Fastned chargers have the contactless reader built into the charger unit. It is usually a small pad with the contactless symbol near the screen. Make sure you are tapping on the reader, not on the screen itself.

2. 2

   Hold your card still for 3 to 5 seconds

   Do not tap and remove quickly. Hold the card flat against the reader and wait. Some readers are slower than retail terminals.

3. 3

   Remove your card from its wallet or phone case

   Other cards, RFID badges, or phone cases with magnets can interfere with the contactless signal. Try the card on its own, directly on the reader.

4. 4

   Try a different card

   Some card issuers block pre-authorization transactions above a certain threshold. Fastned may pre-authorize 100 EUR or more. If your card's contactless limit is lower, the transaction fails.

5. 5

   Use the Fastned app instead

   If the contactless reader is faulty, start the session through the Fastned app. You can also use a roaming RFID card from providers like Shell Recharge or Chargemap.

Charger cable too short for your vehicle

The charging cable attached to the Fastned station does not reach your vehicle's charge port. This depends on your vehicle's port position and how you park.

Symptoms

• Cable reaches the port but is stretched tight with no slack
• Cable does not reach at all when parked normally
• You need to reverse in or park at an awkward angle
• Cable reaches but the connector presses against the car body at a sharp angle

How to Fix It

1. 1

   Reposition your vehicle

   Try parking closer to the charger or at a different angle. If your charge port is on the front left, back in so the port is closest to the cable. Many Fastned stations are designed for pull-through parking.

2. 2

   Try the other cable

   Fastned chargers typically have two cables (CCS2 and CHAdeMO, or two CCS2 cables from different sides). The cable on the other side of the charger may reach more easily.

3. 3

   Try a different charger at the same station

   If the station has multiple charger units, another one may give you a better angle. Charger positions vary slightly across units.

4. 4

   Do not force a stretched cable

   A cable under tension can damage the connector, your charge port, or the cable itself. If it does not reach comfortably, reposition the car. A damaged connector can shut down the charger for everyone.

Speed throttling when multiple vehicles are charging

Your charging speed drops when other vehicles start charging at the same Fastned station. This is power sharing in action.

Symptoms

• Charging started at 150 kW and dropped to 80 kW when another car plugged in
• Speed is lower at a busy station than at the same station when it was empty
• Dashboard shows the charger is limiting power, not the battery
• Speed fluctuates as other vehicles arrive and leave

How to Fix It

1. 1

   Understand how Fastned power sharing works

   Most Fastned stations have a total power budget shared across all active chargers. When more vehicles charge simultaneously, each one gets a smaller share. This is a station design limitation, not a fault.

2. 2

   Charge during off-peak hours if possible

   Fastned stations along highways are busiest during weekend travel peaks and holiday periods. Early morning or late evening sessions often mean you have the station to yourself and get full speed.

3. 3

   Choose a station with more capacity

   Newer Fastned stations and recently upgraded locations tend to have larger power budgets. The Fastned app shows the maximum kW per station. Stations rated at 400 kW per charger usually have more headroom than 150 kW stations.

4. 4

   Do not wait for full speed. Charge what you need and go.

   Even at reduced speed, DC fast charging is much faster than AC. If you are getting 80 kW instead of 150 kW, it takes a few extra minutes, not hours. Charge to 80% and continue your trip.

Busy station with no queue management

You arrive at a Fastned station and all chargers are occupied. There is no official way to join a queue or reserve a spot.

Symptoms

• All chargers are in use and multiple cars are waiting
• No clear queue order. Confusion about who arrived first.
• App does not show how many vehicles are waiting
• You are not sure if you should wait or drive to another station

How to Fix It

1. 1

   Check the Fastned app for nearby alternatives

   Before committing to a wait, check if there is another Fastned station or competitor fast charger within 10 to 15 minutes. Waiting 20 minutes for a spot is often slower than driving to a nearby empty station.

2. 2

   Communicate with other waiting drivers

   Fastned does not have a formal queue system. If you decide to wait, make yourself visible by parking near the charger area and, if comfortable, let other waiting drivers know you are in line. Brief eye contact and a nod go a long way.

3. 3

   Watch for vehicles at high state of charge

   If a vehicle on the charger is already above 80%, it will likely leave soon. Drivers charging from 80 to 100% at a DC fast charger are rare. Most will unplug and leave within minutes.

4. 4

   Plan stops to avoid peak times

   Holiday weekends, Friday afternoons, and Sunday evenings are the busiest. If your schedule is flexible, adjusting departure time by an hour or two can make a significant difference in charger availability.

5. 5

   Send feedback to Fastned

   Fastned expands stations based on utilization data. If a station is consistently full, reporting it through the app helps Fastned prioritize adding more chargers at that location.