Hyundai Kona Electric Charging at Ionity

Hyundai Kona Electric Charger Won't Start? Fix Guide

You have plugged the cable into your Kona Electric, but nothing is happening. No charging indicator, no progress on the screen. The Kona Electric's charge port is in the front, under a flap on the nose of the car. This unusual location sometimes causes cable reach problems. But the issue is usually authentication, a car setting, or the charger itself.

Symptoms

• CCS2 or Type 2 cable plugged in but no charging indicator on the dashboard
• Charge port LED stays off or flashes an error pattern
• Charger screen shows an error or stays on the start screen
• Bluelink app shows the car is not connected to a charger
• Charging begins briefly then stops within seconds

What to Do

1. 1

   Open the front charge port and check the cable

   The charge port is on the front of the car, under a flap. Press the flap to open it. If it is stiff, press more firmly. Insert the CCS2 connector straight in until you hear a click. The LED should light up.

2. 2

   Make sure you are parked nose-in

   Unlike most EVs with rear charge ports, the Kona Electric needs to face the charger. If you backed in, the cable probably will not reach. Pull out and park nose-first.

3. 3

   Authenticate with the charger

   Tap your RFID card, use the charging network's app, or try contactless payment. The Kona Electric does not have Plug & Charge, so you will always need to authenticate manually at DC fast chargers.

4. 4

   Check for a charging schedule

   On the infotainment screen, go to EV settings, then Scheduled Charging. Disable any active schedule or tap 'Charge Now' to override it.

5. 5

   Unplug, wait 30 seconds, and try again

   Remove the cable, wait 30 seconds, reconnect, and re-authenticate. This resets both the car and charger communication.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Try another stall or station. Report the broken charger through the network's app.

Hyundai Kona Electric Charger Payment Failed at Station

You are at a public charger with your Kona Electric, the cable is in, but payment will not go through. The charger shows an error, the app is not cooperating, or your RFID card gets no response. The Kona Electric does not support Plug & Charge, so you always need to authenticate manually. Here is how to work through payment problems.

Symptoms

• Charger screen shows 'payment failed' or 'authorization error'
• RFID card tapped but the charger does not respond
• Charging network app shows an error or hangs during payment
• Contactless card payment declined at the charger terminal
• QR code on the charger leads to a page that will not load

What to Do

1. 1

   Try a different payment method

   If RFID failed, open the charging app. If the app failed, try contactless with a credit or debit card. Having multiple options is the fastest way past payment issues.

2. 2

   Check your charging app account

   Open the app and verify your payment method is valid. Look for expired cards, low prepaid balances, or account restrictions. Update your card details if needed.

3. 3

   Scan the QR code on the charger

   Many chargers have a QR code that opens a web-based payment page. This lets you pay without an account or app. Scan it with your phone camera.

4. 4

   Try a different stall at the same station

   If one charger's payment terminal is broken, the next one over may work fine. Walk to the next stall and try the same payment method.

5. 5

   Try a different charging station

   If all stalls at this location have payment issues, the entire station may have a connectivity problem. Head to a nearby alternative station.

Hyundai Kona Electric Charging Slower Than Expected

The Kona Electric supports up to 100 kW DC fast charging, which is solid but noticeably slower than the 233 kW that 800V Hyundai models can reach. If your Kona is pulling 30 kW at a charger rated for much more, something is off. In most cases, slow charging comes down to battery temperature, state of charge, or the charger not delivering its full rated output.

Symptoms

• DC fast charging speed well below the 100 kW maximum
• AC charging stuck at 3-4 kW instead of 11 kW on a 3-phase connection
• Charging speed drops significantly above 60% state of charge
• Session starts at low power and never ramps up to full speed
• Charger screen shows a lower power output than the unit's rated capacity

What to Do

1. 1

   Check the battery temperature

   Look at the charging information on the 12.3-inch touchscreen. If the battery is cold, use the preconditioning feature in the Bluelink app before arriving at the charger. Driving for 15-20 minutes also warms the battery naturally.

2. 2

   Check your state of charge

   If you are above 70%, the slowdown is expected on the Kona Electric. For road trip charging, plan to arrive between 10-20% and unplug at 80% for the best time-to-range ratio.

3. 3

   Check the charger's rated output

   Look at the charger's specs on its screen, on the unit label, or in the charging network's app. If it is a 50 kW charger, the Kona Electric is getting what the charger can deliver. Find a higher-powered CCS2 charger for faster sessions.

4. 4

   Check scheduled charging and charge limits

   On the infotainment screen or in the Bluelink app, make sure scheduled charging is not delaying or limiting the session. Check that the charge current limit is set to maximum.

5. 5

   Check if the charger is sharing power

   Look at the charger cabinet. If two cables come from the same unit and someone is charging on the other cable, you may be splitting power. Move to an unoccupied charger if available.

6. 6

   Try a different charger or station

   If speed is still low after checking everything, the charger may be underperforming. Try another stall or a different station entirely.

Session won't start after contactless payment

You tap your card, the reader beeps, but the charger never begins delivering power. This is one of the most reported issues at Ionity stations.

Symptoms

• Contactless reader shows a green light but nothing happens
• Screen says 'Initializing' for more than 60 seconds
• Card is charged a pre-authorization hold but no energy is delivered
• Error message appears after the tap but disappears too quickly to read

How to Fix It

1. 1

   Unplug the cable and wait 10 seconds

   This resets the charger's session state. Plug the cable back in firmly until you hear the locking click.

2. 2

   Try a different payment method

   Open the Ionity app and start the session from there instead. If you have an Ionity subscription, use the app. App-initiated sessions bypass the contactless reader entirely.

3. 3

   Check your card's contactless limit

   Some banks block contactless transactions above a certain amount. Ionity may pre-authorize up to 100 EUR. If your bank flags this, the session fails silently.

4. 4

   Move to another stall at the same station

   Individual charger units can have faulty card readers while the rest of the station works fine. Try the next available stall.

5. 5

   Check for a pending hold on your bank statement

   If a hold was placed but no session started, it typically releases within 3 to 7 business days. You will not be charged for energy you did not receive.

Plug & Charge pairing fails

Your vehicle supports Plug & Charge (ISO 15118) but the Ionity station does not recognize it. The charger asks for payment instead of starting automatically.

Symptoms

• Charger prompts for app or card payment instead of starting automatically
• Screen shows 'Vehicle not recognized'
• Plug & Charge worked at this station before but stopped working
• Pairing completed in the Ionity app but the station still asks for payment

How to Fix It

1. 1

   Verify Plug & Charge is enabled in your vehicle settings

   Some vehicles (like Porsche Taycan, BMW iX, Mercedes EQS) have a toggle in the infotainment system. If it was turned off during a software update, the charger cannot identify your car.

2. 2

   Re-pair your vehicle in the Ionity app

   Go to the Ionity app, navigate to Plug & Charge settings, remove the existing pairing, and set it up again. This refreshes the digital certificate.

3. 3

   Check that your Ionity subscription is active

   Plug & Charge on Ionity requires an active subscription. If your subscription lapsed, the auto-start will fail even if the pairing is intact.

4. 4

   Try unplugging and re-plugging slowly

   The ISO 15118 handshake happens in the first few seconds. If you plug in too quickly or the connector is not fully seated, the handshake times out and the charger falls back to manual payment.

5. 5

   Start the session via the app as a fallback

   Plug & Charge issues are often caused by backend certificate mismatches. You can still charge at Ionity subscription rates by starting the session through the app while the issue is resolved.

Charger screen frozen or unresponsive

The charger display is stuck on a loading screen, shows garbled text, or does not respond to touch. The hardware may still work even if the screen does not.

Symptoms

• Screen shows a logo or loading animation that never progresses
• Touch inputs on the screen do nothing
• Screen is completely black but the charger lights are on
• Screen shows an error code that does not clear

How to Fix It

1. 1

   Try plugging in and starting via the app

   The screen and the charging hardware are separate systems. Many Ionity chargers will still deliver power even with a frozen display if you initiate the session through the Ionity app.

2. 2

   Unplug completely and wait 30 seconds

   Sometimes unplugging triggers a soft reset of the charger unit. Wait, then try again.

3. 3

   Try a different stall

   Ionity stations typically have multiple charger units. A frozen screen on one unit does not affect the others.

4. 4

   Report the charger in the Ionity app

   Open the Ionity app, find the station, and report the specific charger as out of order. This helps Ionity dispatch maintenance faster.

App shows station available but charger is faulted

The Ionity app shows green (available) status for a station, but when you arrive, the chargers display errors or are physically out of service.

Symptoms

• App shows 'Available' but charger displays 'Out of Order'
• All stalls at the station are faulted despite the app showing availability
• Charger has a maintenance sticker or barrier but the app has not been updated
• You drove to a station specifically because the app said it was free

How to Fix It

1. 1

   Refresh the station status in the app

   Pull down to refresh the station view. Status updates can lag by several minutes, especially after a charger was recently reported or rebooted.

2. 2

   Check individual charger status, not just the station

   Tap into the station details in the Ionity app. Even if some stalls show faulted, others at the same station may still work.

3. 3

   Try plugging in anyway

   Occasionally a charger shows a stale error on its screen from a previous session but works fine for the next user. Plug in and attempt to start via the app.

4. 4

   Plan a backup station

   Before driving to an Ionity station, check if there is an alternative station within 10 to 15 minutes. Ionity stations along highways sometimes have another Ionity or competitor station at the next exit.

5. 5

   Report the discrepancy

   Use the 'Report a problem' option in the Ionity app. Accurate reports help Ionity fix status sync issues and prioritize maintenance.

Unexpectedly high ad-hoc price

You charged without an Ionity subscription subscription and the per-kWh price is significantly higher than you expected. Ionity's ad-hoc rate is one of the most expensive in Europe.

Symptoms

• Invoice shows 0.75 EUR/kWh or higher
• Total cost for a short session is much higher than expected
• Price displayed on the charger screen was not noticed before starting
• You assumed the price would be similar to home charging or other networks

How to Fix It

1. 1

   Check if Ionity subscription would save you money

   Ionity offers subscription plans that reduce the per-kWh price significantly. Check the Ionity app for current plans and rates. If you charge at Ionity more than once or twice a month, a subscription usually pays for itself.

2. 2

   Check your vehicle manufacturer's charging plan

   Many EV manufacturers (Hyundai, Kia, BMW, Mercedes, Volkswagen Group, Ford) offer bundled Ionity pricing through their own apps. You may already have access to a discounted rate through your car brand.

3. 3

   Look at the charger screen before starting next time

   Ionity displays the per-kWh price on the charger screen before the session starts. The ad-hoc price is always shown.

4. 4

   Consider roaming providers for occasional use

   If you do not want a subscription, some roaming apps (like Shell Recharge, Chargemap, or Maingau) offer lower Ionity rates than the ad-hoc price.

Charging speed much lower than 350 kW

The station advertises 350 kW but your vehicle is charging at a fraction of that speed. This can be normal or it can indicate a problem.

Symptoms

• Dashboard shows 50 to 100 kW at a 350 kW charger
• Charging started fast but dropped sharply after a few minutes
• Other vehicles at the same station seem to charge faster
• Speed is lower than what you normally get at Ionity

How to Fix It

1. 1

   Check your battery level

   Charging speed drops significantly above 60 to 80% state of charge on most vehicles. This is normal battery behavior, not an Ionity issue. For the fastest stop, charge from 10 to 80% and move on.

2. 2

   Check the battery temperature

   Cold batteries charge slowly. If your vehicle supports battery preconditioning, set the Ionity station as your navigation destination. The car will warm the battery on the way there.

3. 3

   Verify your vehicle's max DC charging speed

   Not all EVs can accept 350 kW. Many popular models top out at 100 to 150 kW. The charger delivers only what the vehicle requests.

4. 4

   Try a different stall

   Individual charger units can occasionally have hardware limitations or faults that reduce output. Moving to another stall at the same station can sometimes restore full speed.

5. 5

   Check for power sharing

   Some Ionity stations share power between adjacent stalls. If the neighboring stall is also in use, both vehicles may receive reduced power. Try a stall that is not next to another active session.