Dacia Spring Charging at Atlante

Dacia Spring Electric 65 Charger Will Not Start Charging

You have plugged the CCS2 or Type 2 connector into your Dacia Spring, but nothing happens. No light, no sound, no charging. This is frustrating, but it is usually a simple fix. Most of the time, the problem is with authentication, the cable connection, or the charger itself.

Symptoms

• Connector is plugged in but the charger shows no active session
• The charging indicator light on the dashboard does not turn on
• The charger screen displays an error code after plugging in
• You hear a click when plugging in but charging never begins
• The charger app shows 'waiting' or 'preparing' but never progresses

What to Do

1. 1

   Authenticate before plugging in

   Use your RFID card, charging app, or contactless payment on the charger before inserting the connector. Many chargers will not unlock the cable until a session is started.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely from the Spring's charge port. Wait 10 seconds, then reinsert it firmly until you hear and feel the click. Make sure it sits flush.

3. 3

   Check the charge port

   Inspect the charge port on the front right of the car. Remove any dirt, ice, or water. If the port flap is not fully open, gently push it all the way.

4. 4

   Disable any charging schedule

   On the dashboard, go to the charging settings and check if a charging timer or schedule is active. Disable it to allow immediate charging.

5. 5

   Try a different connector or charger

   If the charger has two connectors, try the other one. If the charger still does not start, move to a different charger at the same location or a nearby station.

6. 6

   Contact the charging network

   If nothing works, call the number displayed on the charger. The operator can sometimes remotely restart the charger or confirm it is out of service.

Dacia Spring Electric 65 Charger Payment Not Working

You are at the charger with your Dacia Spring, ready to plug in, but the payment will not go through. Your card gets declined, the app spins forever, or the charger does not accept your RFID card. Payment problems are one of the most common issues at public chargers, and they have nothing to do with your car.

Symptoms

• RFID card tap does not start a session
• Charging app shows a payment error or timeout
• Contactless bank card is declined at the charger
• Charger displays 'payment failed' or 'authorization error'
• Session starts but ends immediately with a billing error

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the charger display or the stickers on the unit. It will show which networks, apps, or card types are accepted. If your payment method is not listed, you need a different option.

2. 2

   Try a different payment method

   If your RFID card fails, try the network's app. If the app fails, try a contactless bank card. Having at least two payment options is essential for public charging.

3. 3

   Check your bank balance and card status

   Make sure you have enough balance to cover the pre-authorization hold. Check your banking app for any blocked transactions. Some banks flag charging stations as unusual activity.

4. 4

   Re-tap your RFID card slowly

   Hold the RFID card flat against the reader for 2-3 seconds. Do not tap and pull away quickly. Some readers need a longer contact time.

5. 5

   Restart the charger session

   Cancel any pending session in the app, wait 30 seconds, and try again from scratch. Sometimes a failed payment leaves a ghost session that blocks new attempts.

6. 6

   Move to a different charger

   If payment keeps failing on one unit, try the next one. Card readers on individual chargers can be faulty while others at the same station work fine.

Dacia Spring Electric 65 Charging Slower Than Expected

You plugged in your Dacia Spring and the charging speed seems painfully slow. Before you worry, here is the reality: the Spring's maximum DC charging speed is 34 kW. That is by design, not a fault. But if you are seeing speeds well below that, or your AC charging is stuck at 2 kW, there are things you can check.

Symptoms

• DC fast charging speed below the 34 kW maximum
• AC home charging stuck at 2-3 kW instead of 7 kW
• Charging speed drops to single digits above 70%
• The charger display shows lower power than you expected
• A full DC charge takes much longer than the estimated time

What to Do

1. 1

   Check the battery temperature

   Look at the dashboard display. If it is cold outside, the battery may need to warm up. Drive for 15-20 minutes before stopping at a DC charger to let the battery reach a better temperature.

2. 2

   Verify your state of charge

   If you are above 70%, the slower speed is expected. For the fastest DC charging on the Spring, arrive between 10-30% and stop at 80%.

3. 3

   Check if the charger is shared

   Look at the charger unit. If two cables come from the same unit and someone is using the other one, you are likely sharing power. Move to a charger with a free pair if available.

4. 4

   Confirm your AC charger capacity

   For home charging, check that your wallbox is rated for at least 32A single-phase to deliver the full 7 kW. A standard household outlet with a portable charger will be much slower.

5. 5

   Try a different charger

   If DC speeds are well below 30 kW at a low state of charge and warm battery, the charger may be faulty. Try a different unit or station.

6. 6

   Accept the car's limits

   The Spring is designed as a city car with a small battery. DC fast charging is for occasional use, not daily long-distance travel. Plan accordingly and use AC charging overnight as your primary method.

New station with teething problems

Atlante is expanding rapidly, and many stations are brand new. Newly installed chargers sometimes have firmware bugs, incomplete network configuration, or hardware that has not been fully tested under real-world conditions.

Symptoms

• Charger turns on but fails to communicate with your vehicle
• Session starts but drops after a few seconds
• Charger screen shows an error code you have never seen before
• Station appears on the map but the chargers are not yet operational

How to Fix It

1. 1

   Try a different charger at the same station

   New stations often have multiple units and the issue may be limited to one charger. Try another unit before giving up on the location.

2. 2

   Unplug, wait 30 seconds, and retry

   New charger firmware sometimes fails on the first handshake but succeeds on the second attempt. A short wait lets the charger reset its session state.

3. 3

   Start the session through the Atlante app

   If the charger's screen or contactless reader is not working properly, the app provides a separate communication path to the charger's backend. This can bypass local hardware issues.

4. 4

   Check the Atlante app for station status notes

   Atlante sometimes posts notices about newly activated stations that are still in testing. The station detail page in the app may show a note about limited functionality.

5. 5

   Report the issue and move to the next station

   Use the Atlante app to report the problem. New station issues are usually fixed quickly once reported. Check the app for the nearest alternative Atlante or competitor station.

App crashes on older phones

The Atlante app can be unstable on older phones or phones running outdated operating systems. The app may crash during login, while loading the map, or in the middle of starting a session.

Symptoms

• App closes unexpectedly when you open the station map
• App freezes during the payment screen
• Login screen loads but the app crashes after entering credentials
• App works briefly but crashes when you try to start a session

How to Fix It

1. 1

   Update the Atlante app to the latest version

   Atlante pushes frequent updates that fix stability issues. Open the App Store or Google Play and check for updates before your trip.

2. 2

   Clear the app cache

   On Android, go to Settings, Apps, Atlante, and clear the cache. On iPhone, delete and reinstall the app. Corrupted cache data is a common cause of crashes.

3. 3

   Check your phone's operating system version

   The Atlante app may require iOS 15+ or Android 10+. If your phone is on an older version, update if possible. If your phone cannot update, you may need a roaming app as a backup.

4. 4

   Use contactless payment as a fallback

   If the app keeps crashing and the station supports contactless, tap your credit or debit card on the charger's payment terminal. Not all Atlante stations have this yet, but it completely bypasses the app.

5. 5

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Electropass can start sessions at Atlante stations without using the Atlante app. Check roaming coverage before relying on this.

Contactless payment terminal not activated

Atlante is rolling out contactless card payment across its network, but not every charger has an active terminal yet. Some units have the hardware installed but the payment function is not turned on.

Symptoms

• Card reader is visible on the charger but does not respond to a tap
• Screen says 'Use app to start' with no contactless option shown
• Contactless symbol is printed on the charger but the reader light is off
• You see a payment terminal but tapping produces no response

How to Fix It

1. 1

   Download and use the Atlante app

   At stations where contactless is not yet active, the Atlante app is the primary payment method. Download it before your trip and add a payment card in advance.

2. 2

   Check the charger screen for payment instructions

   Some Atlante chargers display which payment methods are currently available. If contactless is not listed, the terminal is not active at that unit.

3. 3

   Try a different charger at the same station

   Contactless activation sometimes rolls out unit by unit. Another charger at the same station may have an active terminal.

4. 4

   Use a roaming RFID card or app

   If you have an RFID card from a roaming provider, try tapping it. Some Atlante stations accept roaming RFID even when the contactless card terminal is not active.

Charger screen hard to read in direct sunlight

Some Atlante charger screens have low brightness levels that make them nearly impossible to read in bright sunlight. This is especially common at stations in Southern Europe during summer.

Symptoms

• Screen content is barely visible outdoors during the day
• You cannot read the price, status, or error messages on the screen
• Screen appears to be off but the charger is actually on
• You have to cup your hands around the screen to read it

How to Fix It

1. 1

   Use your body or hand to shade the screen

   Stand to block direct sunlight from hitting the screen. Even partial shade can make the display readable.

2. 2

   Take a photo of the screen with your phone

   Your phone camera can sometimes capture what your eyes cannot. Take a photo and zoom in to read the text.

3. 3

   Use the Atlante app to monitor your session

   All session information (charging speed, energy delivered, cost, estimated time) is available in the app. You do not need the charger screen to track your session.

4. 4

   Start the session entirely through the app

   If you cannot read the screen at all, use the Atlante app to select the charger, start the session, and stop it when done. This avoids needing to interact with the screen.

Cable connector requires specific angle to lock

Some Atlante charger cables need to be inserted at a particular angle or with extra force for the CCS2 connector to seat properly. If it is not fully locked, the session will not start.

Symptoms

• Connector feels like it is in but the charger does not recognize it
• Charger screen says 'Connect cable' even though the cable is plugged in
• You hear a partial click but the connector is not locked
• Connector slides back out after you let go

How to Fix It

1. 1

   Push the connector straight in, then slightly upward

   Some Atlante CCS2 connectors need a slight upward tilt after the initial push to engage the locking mechanism. You should feel and hear a solid click.

2. 2

   Check for debris in the vehicle's charging port

   Dust, ice, or a small pebble in the port can prevent the connector from seating fully. Inspect the port and brush out anything you find.

3. 3

   Make sure the vehicle is unlocked and ready to charge

   Some vehicles lock the charging port flap or disable the inlet when the car is locked or in drive mode. Ensure the car is in park and unlocked.

4. 4

   Try a different cable if the charger has two

   If the charger has two CCS2 cables, try the other one. One cable may have a slightly worn connector that does not seat as easily.