Dacia Spring Charging at Ionity

Dacia Spring Electric 65 Charger Will Not Start Charging

You have plugged the CCS2 or Type 2 connector into your Dacia Spring, but nothing happens. No light, no sound, no charging. This is frustrating, but it is usually a simple fix. Most of the time, the problem is with authentication, the cable connection, or the charger itself.

Symptoms

• Connector is plugged in but the charger shows no active session
• The charging indicator light on the dashboard does not turn on
• The charger screen displays an error code after plugging in
• You hear a click when plugging in but charging never begins
• The charger app shows 'waiting' or 'preparing' but never progresses

What to Do

1. 1

   Authenticate before plugging in

   Use your RFID card, charging app, or contactless payment on the charger before inserting the connector. Many chargers will not unlock the cable until a session is started.

2. 2

   Unplug and replug the connector

   Remove the CCS2 or Type 2 connector completely from the Spring's charge port. Wait 10 seconds, then reinsert it firmly until you hear and feel the click. Make sure it sits flush.

3. 3

   Check the charge port

   Inspect the charge port on the front right of the car. Remove any dirt, ice, or water. If the port flap is not fully open, gently push it all the way.

4. 4

   Disable any charging schedule

   On the dashboard, go to the charging settings and check if a charging timer or schedule is active. Disable it to allow immediate charging.

5. 5

   Try a different connector or charger

   If the charger has two connectors, try the other one. If the charger still does not start, move to a different charger at the same location or a nearby station.

6. 6

   Contact the charging network

   If nothing works, call the number displayed on the charger. The operator can sometimes remotely restart the charger or confirm it is out of service.

Dacia Spring Electric 65 Charger Payment Not Working

You are at the charger with your Dacia Spring, ready to plug in, but the payment will not go through. Your card gets declined, the app spins forever, or the charger does not accept your RFID card. Payment problems are one of the most common issues at public chargers, and they have nothing to do with your car.

Symptoms

• RFID card tap does not start a session
• Charging app shows a payment error or timeout
• Contactless bank card is declined at the charger
• Charger displays 'payment failed' or 'authorization error'
• Session starts but ends immediately with a billing error

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the charger display or the stickers on the unit. It will show which networks, apps, or card types are accepted. If your payment method is not listed, you need a different option.

2. 2

   Try a different payment method

   If your RFID card fails, try the network's app. If the app fails, try a contactless bank card. Having at least two payment options is essential for public charging.

3. 3

   Check your bank balance and card status

   Make sure you have enough balance to cover the pre-authorization hold. Check your banking app for any blocked transactions. Some banks flag charging stations as unusual activity.

4. 4

   Re-tap your RFID card slowly

   Hold the RFID card flat against the reader for 2-3 seconds. Do not tap and pull away quickly. Some readers need a longer contact time.

5. 5

   Restart the charger session

   Cancel any pending session in the app, wait 30 seconds, and try again from scratch. Sometimes a failed payment leaves a ghost session that blocks new attempts.

6. 6

   Move to a different charger

   If payment keeps failing on one unit, try the next one. Card readers on individual chargers can be faulty while others at the same station work fine.

Dacia Spring Electric 65 Charging Slower Than Expected

You plugged in your Dacia Spring and the charging speed seems painfully slow. Before you worry, here is the reality: the Spring's maximum DC charging speed is 34 kW. That is by design, not a fault. But if you are seeing speeds well below that, or your AC charging is stuck at 2 kW, there are things you can check.

Symptoms

• DC fast charging speed below the 34 kW maximum
• AC home charging stuck at 2-3 kW instead of 7 kW
• Charging speed drops to single digits above 70%
• The charger display shows lower power than you expected
• A full DC charge takes much longer than the estimated time

What to Do

1. 1

   Check the battery temperature

   Look at the dashboard display. If it is cold outside, the battery may need to warm up. Drive for 15-20 minutes before stopping at a DC charger to let the battery reach a better temperature.

2. 2

   Verify your state of charge

   If you are above 70%, the slower speed is expected. For the fastest DC charging on the Spring, arrive between 10-30% and stop at 80%.

3. 3

   Check if the charger is shared

   Look at the charger unit. If two cables come from the same unit and someone is using the other one, you are likely sharing power. Move to a charger with a free pair if available.

4. 4

   Confirm your AC charger capacity

   For home charging, check that your wallbox is rated for at least 32A single-phase to deliver the full 7 kW. A standard household outlet with a portable charger will be much slower.

5. 5

   Try a different charger

   If DC speeds are well below 30 kW at a low state of charge and warm battery, the charger may be faulty. Try a different unit or station.

6. 6

   Accept the car's limits

   The Spring is designed as a city car with a small battery. DC fast charging is for occasional use, not daily long-distance travel. Plan accordingly and use AC charging overnight as your primary method.

Session won't start after contactless payment

You tap your card, the reader beeps, but the charger never begins delivering power. This is one of the most reported issues at Ionity stations.

Symptoms

• Contactless reader shows a green light but nothing happens
• Screen says 'Initializing' for more than 60 seconds
• Card is charged a pre-authorization hold but no energy is delivered
• Error message appears after the tap but disappears too quickly to read

How to Fix It

1. 1

   Unplug the cable and wait 10 seconds

   This resets the charger's session state. Plug the cable back in firmly until you hear the locking click.

2. 2

   Try a different payment method

   Open the Ionity app and start the session from there instead. If you have an Ionity subscription, use the app. App-initiated sessions bypass the contactless reader entirely.

3. 3

   Check your card's contactless limit

   Some banks block contactless transactions above a certain amount. Ionity may pre-authorize up to 100 EUR. If your bank flags this, the session fails silently.

4. 4

   Move to another stall at the same station

   Individual charger units can have faulty card readers while the rest of the station works fine. Try the next available stall.

5. 5

   Check for a pending hold on your bank statement

   If a hold was placed but no session started, it typically releases within 3 to 7 business days. You will not be charged for energy you did not receive.

Plug & Charge pairing fails

Your vehicle supports Plug & Charge (ISO 15118) but the Ionity station does not recognize it. The charger asks for payment instead of starting automatically.

Symptoms

• Charger prompts for app or card payment instead of starting automatically
• Screen shows 'Vehicle not recognized'
• Plug & Charge worked at this station before but stopped working
• Pairing completed in the Ionity app but the station still asks for payment

How to Fix It

1. 1

   Verify Plug & Charge is enabled in your vehicle settings

   Some vehicles (like Porsche Taycan, BMW iX, Mercedes EQS) have a toggle in the infotainment system. If it was turned off during a software update, the charger cannot identify your car.

2. 2

   Re-pair your vehicle in the Ionity app

   Go to the Ionity app, navigate to Plug & Charge settings, remove the existing pairing, and set it up again. This refreshes the digital certificate.

3. 3

   Check that your Ionity subscription is active

   Plug & Charge on Ionity requires an active subscription. If your subscription lapsed, the auto-start will fail even if the pairing is intact.

4. 4

   Try unplugging and re-plugging slowly

   The ISO 15118 handshake happens in the first few seconds. If you plug in too quickly or the connector is not fully seated, the handshake times out and the charger falls back to manual payment.

5. 5

   Start the session via the app as a fallback

   Plug & Charge issues are often caused by backend certificate mismatches. You can still charge at Ionity subscription rates by starting the session through the app while the issue is resolved.

Charger screen frozen or unresponsive

The charger display is stuck on a loading screen, shows garbled text, or does not respond to touch. The hardware may still work even if the screen does not.

Symptoms

• Screen shows a logo or loading animation that never progresses
• Touch inputs on the screen do nothing
• Screen is completely black but the charger lights are on
• Screen shows an error code that does not clear

How to Fix It

1. 1

   Try plugging in and starting via the app

   The screen and the charging hardware are separate systems. Many Ionity chargers will still deliver power even with a frozen display if you initiate the session through the Ionity app.

2. 2

   Unplug completely and wait 30 seconds

   Sometimes unplugging triggers a soft reset of the charger unit. Wait, then try again.

3. 3

   Try a different stall

   Ionity stations typically have multiple charger units. A frozen screen on one unit does not affect the others.

4. 4

   Report the charger in the Ionity app

   Open the Ionity app, find the station, and report the specific charger as out of order. This helps Ionity dispatch maintenance faster.

App shows station available but charger is faulted

The Ionity app shows green (available) status for a station, but when you arrive, the chargers display errors or are physically out of service.

Symptoms

• App shows 'Available' but charger displays 'Out of Order'
• All stalls at the station are faulted despite the app showing availability
• Charger has a maintenance sticker or barrier but the app has not been updated
• You drove to a station specifically because the app said it was free

How to Fix It

1. 1

   Refresh the station status in the app

   Pull down to refresh the station view. Status updates can lag by several minutes, especially after a charger was recently reported or rebooted.

2. 2

   Check individual charger status, not just the station

   Tap into the station details in the Ionity app. Even if some stalls show faulted, others at the same station may still work.

3. 3

   Try plugging in anyway

   Occasionally a charger shows a stale error on its screen from a previous session but works fine for the next user. Plug in and attempt to start via the app.

4. 4

   Plan a backup station

   Before driving to an Ionity station, check if there is an alternative station within 10 to 15 minutes. Ionity stations along highways sometimes have another Ionity or competitor station at the next exit.

5. 5

   Report the discrepancy

   Use the 'Report a problem' option in the Ionity app. Accurate reports help Ionity fix status sync issues and prioritize maintenance.

Unexpectedly high ad-hoc price

You charged without an Ionity subscription subscription and the per-kWh price is significantly higher than you expected. Ionity's ad-hoc rate is one of the most expensive in Europe.

Symptoms

• Invoice shows 0.75 EUR/kWh or higher
• Total cost for a short session is much higher than expected
• Price displayed on the charger screen was not noticed before starting
• You assumed the price would be similar to home charging or other networks

How to Fix It

1. 1

   Check if Ionity subscription would save you money

   Ionity offers subscription plans that reduce the per-kWh price significantly. Check the Ionity app for current plans and rates. If you charge at Ionity more than once or twice a month, a subscription usually pays for itself.

2. 2

   Check your vehicle manufacturer's charging plan

   Many EV manufacturers (Hyundai, Kia, BMW, Mercedes, Volkswagen Group, Ford) offer bundled Ionity pricing through their own apps. You may already have access to a discounted rate through your car brand.

3. 3

   Look at the charger screen before starting next time

   Ionity displays the per-kWh price on the charger screen before the session starts. The ad-hoc price is always shown.

4. 4

   Consider roaming providers for occasional use

   If you do not want a subscription, some roaming apps (like Shell Recharge, Chargemap, or Maingau) offer lower Ionity rates than the ad-hoc price.

Charging speed much lower than 350 kW

The station advertises 350 kW but your vehicle is charging at a fraction of that speed. This can be normal or it can indicate a problem.

Symptoms

• Dashboard shows 50 to 100 kW at a 350 kW charger
• Charging started fast but dropped sharply after a few minutes
• Other vehicles at the same station seem to charge faster
• Speed is lower than what you normally get at Ionity

How to Fix It

1. 1

   Check your battery level

   Charging speed drops significantly above 60 to 80% state of charge on most vehicles. This is normal battery behavior, not an Ionity issue. For the fastest stop, charge from 10 to 80% and move on.

2. 2

   Check the battery temperature

   Cold batteries charge slowly. If your vehicle supports battery preconditioning, set the Ionity station as your navigation destination. The car will warm the battery on the way there.

3. 3

   Verify your vehicle's max DC charging speed

   Not all EVs can accept 350 kW. Many popular models top out at 100 to 150 kW. The charger delivers only what the vehicle requests.

4. 4

   Try a different stall

   Individual charger units can occasionally have hardware limitations or faults that reduce output. Moving to another stall at the same station can sometimes restore full speed.

5. 5

   Check for power sharing

   Some Ionity stations share power between adjacent stalls. If the neighboring stall is also in use, both vehicles may receive reduced power. Try a stall that is not next to another active session.