BMW i5 Charging at EVBox

BMW i5 eDrive40 Charger Won't Start: Fix Guide Now

You have connected your BMW i5 to a charger, but the session will not start. The charger sits idle, iDrive shows nothing, or you get an error message. This is one of the most reported problems at public chargers, and the fix is usually simple.

Symptoms

• The charger screen stays on 'connect vehicle' after plugging in the CCS2 cable
• iDrive does not show any charging activity
• The charge port LED on the i5 does not illuminate
• An error code appears on the charger display
• The connector does not lock into the charge port

What to Do

1. 1

   Make sure the i5 is unlocked

   The charge port only opens and accepts a connector when the car is unlocked. Use the key fob or My BMW app to unlock if needed.

2. 2

   Seat the connector firmly

   Push the CCS2 or Type 2 plug straight into the port until it clicks and locks. The charging port is on the rear right of the i5. Do not twist or angle the connector.

3. 3

   Complete authentication at the charger

   Tap your RFID card, start the session in the charging app, or pay via contactless. The charger needs authorization before it sends power to your i5.

4. 4

   Check iDrive for scheduling conflicts

   Open iDrive and navigate to Charging, then Charging Settings. If a departure time or scheduled window is active, switch to 'Charge Immediately' to override it.

5. 5

   Unplug and reconnect

   Remove the connector, wait 15 seconds, then plug in again. This forces a new handshake between the i5 and the charger, which resolves many communication issues.

6. 6

   Move to another charger

   If nothing works, the charger is likely faulty. Try another stall or station. Report the broken charger through the network app so others are warned.

BMW i5 Charging Payment Failed: Solutions That Work

Your BMW i5 is plugged in and ready, but the charger will not accept your payment. Whether it is an RFID card that gets no response, an app that throws an error, or a declined bank card, this stops you from charging. Here is how to get past it quickly.

Symptoms

• Charger shows 'authentication failed' or 'payment error'
• RFID card tap produces no response on the charger
• Charging app fails to start the session with a payment error
• Contactless bank card is declined at the charger terminal
• Session starts but immediately cancels with a billing error

What to Do

1. 1

   Switch to a different payment method

   Try another RFID card, a different charging app, or contactless bank card. Having at least two options means one failure does not strand you.

2. 2

   Verify your account status

   Open the charging app and check your payment method, balance, and subscription status. Fix any issues before retrying.

3. 3

   Check which networks this charger accepts

   Look for network logos on the charger unit. If your provider is not listed, you need ad-hoc payment or a different provider.

4. 4

   Scan the QR code for ad-hoc payment

   Most modern European chargers have a QR code. Scan it with your phone to open a web-based payment page. You can pay with any credit or debit card, no app needed.

5. 5

   Cancel and restart the session

   If the payment seemed to process but charging did not start, cancel the session in the app and try again. A fresh authorization attempt often works.

6. 6

   Call the network's support number

   The charger should display a support phone number. The operator can sometimes authorize sessions remotely or troubleshoot billing issues in real time.

BMW i5 eDrive40 Charging Too Slow: Causes and Fixes

Your BMW i5 eDrive40 can charge at up to 205kW on a DC fast charger, which is impressive for a 400V car. But if you are seeing far lower numbers on the iDrive display, something is limiting the power. Most causes are easy to identify and fix.

Symptoms

• DC charging power shown in iDrive is well below 205kW
• Charging takes much longer than expected for the 81.2kWh battery
• Speed drops drastically above 50% state of charge
• AC charging is stuck at 11kW even at a 22kW station
• iDrive displays a battery temperature warning or conditioning message

What to Do

1. 1

   Check current power in iDrive

   Open the charging screen on iDrive to see the live kW figure, battery temperature, and estimated completion time. This tells you immediately whether the car or the charger is the limiting factor.

2. 2

   Precondition the battery before arriving

   Enter the charging station as a destination in iDrive navigation. The i5 will automatically warm (or cool) the battery to optimal charging temperature while you drive. This can double your initial charging speed in winter.

3. 3

   Choose a high-power charger

   Use the BMW app or a charger map to find stations rated at 200kW or above. Ionity, Fastned, and some Shell Recharge stations offer 300kW+ chargers that let the i5 reach its peak.

4. 4

   Avoid power-sharing stalls

   At charger parks with paired stalls (A1/A2, B1/B2), choose a pair where the other stall is empty. This gives your i5 the full charger output.

5. 5

   Charge in the optimal range

   Plan your stops to arrive between 5% and 15% and leave at 80%. This keeps you in the fastest part of the i5's charging curve and minimizes time per kWh added.

6. 6

   Install software updates

   BMW pushes OTA updates that can improve charging performance. Check iDrive under Settings, then Software Update, and install any pending updates.

EVBox app vs third-party operator confusion

You see an EVBox-branded charger and download the EVBox app, but the session will not start because the station is operated by a different company. Many EVBox chargers are hardware only, with a separate operator managing access and billing.

Symptoms

• EVBox app does not show the station or cannot start a session
• You created an EVBox account but the charger asks for a different app or RFID card
• Charger has EVBox branding but the screen shows a different company name
• QR code on the charger leads to a different operator's website or app

How to Fix It

1. 1

   Check the operator name on the charger screen or signage

   Look at the charger display when it is idle. The operator name is usually shown on the welcome screen. Common operators using EVBox hardware include municipalities, parking companies, and energy providers.

2. 2

   Scan the QR code on the charger

   The QR code leads to the operator's platform, not necessarily EVBox. Scan it to find out which app or website you need.

3. 3

   Try a roaming RFID card

   If you have an RFID card from Shell Recharge, Chargemap, Plugsurfing, or another roaming provider, try tapping it. Many EVBox chargers accept roaming cards regardless of who operates them.

4. 4

   Search for the station in a multi-network app

   Apps like Chargemap or Shell Recharge aggregate many operators. Search for the charger location and you should see which operator runs it and how to start a session.

5. 5

   Download the correct operator's app

   Once you know who operates the station, download their app. The EVBox app only works for chargers that EVBox operates directly.

CHAdeMO connector availability varies

Some EVBox fast chargers have both CCS2 and CHAdeMO connectors, but the CHAdeMO connector may be out of service, removed, or restricted. CHAdeMO is being phased out in Europe and availability is declining.

Symptoms

• CHAdeMO connector is physically present but does not work
• Charger screen shows CHAdeMO as 'Unavailable' or 'Out of Order'
• CHAdeMO connector has been removed and the port is capped
• App shows CHAdeMO available but the physical connector is missing

How to Fix It

1. 1

   Check the charger before relying on CHAdeMO

   If your vehicle uses CHAdeMO, visually confirm the connector is present and functional at the station before planning your stop. App data may not reflect recent hardware changes.

2. 2

   Try the CHAdeMO connector even if the app status is unclear

   Plug in and attempt to start a session. Sometimes the app shows a stale status but the connector works fine.

3. 3

   Have a CCS2 adapter as a long-term solution

   If your vehicle only has CHAdeMO (common in older Nissan Leafs and some Mitsubishi models), CHAdeMO infrastructure is shrinking across Europe. A CHAdeMO-to-CCS2 adapter may be worth investigating for your specific vehicle.

4. 4

   Filter for CHAdeMO in your charging app

   When planning a route, filter specifically for stations with verified CHAdeMO connectors. User reviews and recent check-ins are more reliable than operator listings for CHAdeMO availability.

RFID card registration process unclear

To use an RFID card at EVBox-operated stations, you may need to register the card through the EVBox platform first. The registration process is not always obvious.

Symptoms

• New RFID card does not work at the charger even after ordering it from EVBox
• Card works at other networks but not at EVBox-operated stations
• You received a card but there are no activation instructions
• Online portal asks for a card number format you do not recognize

How to Fix It

1. 1

   Check the activation email

   When you order an RFID card from EVBox, they send an activation email. Check your inbox and spam folder. The email contains a link to activate the card in your EVBox account.

2. 2

   Add the card in the EVBox app or portal

   Log in to your EVBox account (app or web portal). Navigate to 'My cards' or 'Charge cards' and add the card using the number printed on it. The card does not work until it is linked to your account.

3. 3

   Wait for activation to propagate

   After registering the card, it may take up to 24 hours for the activation to reach all chargers. If the card does not work immediately after registration, try again the next day.

4. 4

   Use the app as a backup while the card activates

   You can start sessions through the EVBox app while waiting for your RFID card to activate. Tap 'Start charging' in the app and select the charger.

Charger offline due to firmware update

EVBox periodically pushes firmware updates to their chargers. During an update, the charger is temporarily unavailable. This can happen without warning and usually lasts 10 to 30 minutes.

Symptoms

• Charger screen shows 'Updating' or 'Maintenance' message
• Charger was working a few minutes ago but now shows as offline
• App shows the charger as unavailable with no estimated return time
• Multiple chargers at the same location are all offline simultaneously

How to Fix It

1. 1

   Wait 10 to 15 minutes

   Firmware updates on EVBox chargers usually complete within 10 to 30 minutes. If the charger shows an update message, it will likely come back online shortly.

2. 2

   Try another charger at the same location

   Firmware updates sometimes roll out one unit at a time. If there are multiple chargers, others may still be operational.

3. 3

   Check the app for status updates

   The operator's app or the EVBox app may show whether the outage is a scheduled update or an unexpected fault. Scheduled updates usually have an estimated completion time.

4. 4

   Move to an alternative station if you cannot wait

   If you need to charge immediately and the update is taking longer than expected, use a multi-network app to find the nearest available charger from any network.

Power sharing between connectors reduces speed

Some EVBox fast chargers share their power output between two connectors. When both are in use, each vehicle receives roughly half the charger's maximum power.

Symptoms

• Charging speed drops by half when a second car plugs into the same unit
• Dashboard shows 75 kW at a charger rated for 150 kW
• Speed suddenly increases when the car on the other connector finishes
• One side of the charger consistently delivers more power than the other

How to Fix It

1. 1

   Check if both connectors are on the same unit

   EVBox dual-connector chargers share one power module. If both CCS2 cables come from the same physical cabinet, they share power. Two separate cabinets are two independent chargers.

2. 2

   Choose an unoccupied charger unit if available

   If multiple charger units are available, pick one where the other connector is not in use. You will get the full rated power to yourself.

3. 3

   Understand how power sharing works

   Power sharing is dynamic. The charger allocates power based on what each vehicle can accept. If the other vehicle is at 80% and barely drawing power, you may get most of the charger's output even while sharing.

4. 4

   Wait for the other car to finish

   If your speed is reduced by sharing, it will increase when the other vehicle finishes. Check your dashboard periodically. The speed change happens automatically without any action from you.

5. 5

   Check your vehicle's own limits first

   Before assuming power sharing is the issue, verify that your car is not limiting the speed due to battery temperature, state of charge above 80%, or its own maximum DC charging rate.