Tesla Model S Charging at EVBox

Tesla Model S Charger Will Not Start a Session

You plugged in your Model S and nothing is happening. No green light on the charge port, no animation on the 17-inch touchscreen, just silence. Whether you are at a Supercharger, a third-party CCS2 station, or a home wallbox, there are a handful of common reasons the session will not begin.

Symptoms

• Charge port LED stays white or flashes red after plugging in the connector
• 17-inch touchscreen shows no charging animation or displays an error message
• Supercharger stall makes a click but does not begin delivering power
• CCS2 connector at a third-party station locks in but charging never starts
• Tesla app shows 'Not Charging' even though the cable is connected

What to Do

1. 1

   Check the charge port LED color

   Walk to the left rear of the car and look at the charge port light. White means ready but not connected. Blue means communicating. Green means charging. Red or amber means there is a fault. If it is white with the cable plugged in, remove and reseat the connector firmly.

2. 2

   Unplug and replug the connector

   Remove the connector completely, wait five seconds, then reinsert it until you hear the latch click. On CCS2 connectors, make sure both the top (AC pins) and bottom (DC pins) sections are seated properly.

3. 3

   Check for scheduled charging on the touchscreen

   On the 17-inch touchscreen, go to Controls, then Charging. If scheduled charging is active, you will see the planned start time. Tap to disable it or select 'Charge Now' to override the schedule.

4. 4

   Authorize the session at non-Tesla chargers

   At third-party CCS2 stations, check whether the charger requires you to start the session through an app, RFID card, or contactless payment. Plug & Charge works at supported stations, but many still require manual authorization.

5. 5

   Try a different stall or charger

   If you are at a Supercharger, move to a different stall. If you are at a third-party station, try the other connector. A faulted charger looks identical to a working one from the outside.

6. 6

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the 17-inch touchscreen goes black and reboots. This resets the charging controller and fixes some communication glitches. The car stays on during the reboot.

Tesla Model S Payment Failed at Charging Station

You are plugged in and the charger is waiting for payment, or the Supercharger session will not start because of a billing issue. Payment problems are one of the most common reasons drivers get stuck at chargers, and the Model S has multiple ways to pay depending on where you are charging.

Symptoms

• Supercharger session will not start and the Tesla app shows a payment error
• Third-party CCS2 charger displays 'Authorization failed' after tapping your card
• RFID card is not recognized by the charger's reader
• Plug & Charge does not activate at a supported station
• Contactless bank card is rejected by the charger's payment terminal

What to Do

1. 1

   Check your Tesla account payment method

   Open the Tesla app on your phone. Go to Account, then Payment. Verify your credit card is current and has not expired. If the card was replaced, update the details. Supercharger sessions will not start without a valid payment method on file.

2. 2

   Try a different payment method at the charger

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two payment methods gives you a backup when one does not work.

3. 3

   Scan the charger QR code for browser payment

   Most public chargers have a QR code on the unit. Scanning it with your phone opens the operator's payment page in your browser. You can usually pay with a credit card directly without downloading their app.

4. 4

   Check your banking app for blocked transactions

   Open your banking app and look for flagged or declined transactions. Some banks require you to approve the charge manually. Approve it and retry the payment at the charger.

5. 5

   Try Plug & Charge by replugging

   If the charger supports Plug & Charge, unplug the CCS2 connector from your Model S, wait a few seconds, and replug. Payment should authorize automatically through the cable. This only works if your Tesla account has Plug & Charge enabled and the charger supports ISO 15118.

6. 6

   Move to a Supercharger or a different station

   If you cannot resolve the payment issue, find a Tesla Supercharger using the nav on the 17-inch touchscreen. Supercharger billing is handled entirely through your Tesla account, bypassing third-party payment systems.

Tesla Model S Charging Slower Than Expected at Charger

You pulled into a Supercharger expecting 250 kW and the 17-inch touchscreen shows 80 kW. Or your home wallbox is crawling at 3 kW instead of 11 kW. The Model S has one of the fastest charging curves on the road, but reaching peak speed depends on battery temperature, state of charge, and a few settings you can check in under a minute.

Symptoms

• DC fast charging power well below 250 kW on the touchscreen despite a rated charger
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 40-50% on the touchscreen during DC fast charging
• Supercharger shows significantly lower kW than neighboring stalls
• Non-Tesla CCS2 charger delivers far less power than its rated maximum

What to Do

1. 1

   Check if the battery was preconditioned

   On the 17-inch touchscreen, tap the charging icon. If you see a snowflake icon or a message about conditioning, the battery was not warm enough when you arrived. Next time, navigate to the charger using Tesla nav at least 20-30 minutes before arrival so preconditioning kicks in automatically.

2. 2

   Check your current state of charge

   If you are above 50%, the slower speed is expected on the 95 kWh NCA pack. Peak power happens roughly between 5-30%. For the fastest charging stops on a road trip, arrive between 10-20%.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in A/B pairs (3A/3B, 4A/4B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers with the Magic Dock or the new V4 cable, this is not a concern.

4. 4

   Check the AC charge current limit on the touchscreen

   Go to Controls, then Charging on the touchscreen. Look for the charge current setting. Make sure it is set to the maximum amperage. This only affects AC charging at home or destination chargers, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds remain low, the charger hardware may be degraded. Try another stall at the same location. On non-Tesla CCS2 stations, check the charger display for error codes or reduced power notices.

6. 6

   Check for a Tesla software update

   Go to Controls, then Software on the touchscreen. If an update is pending, install it. Tesla has adjusted charging curves through over-the-air updates in the past, sometimes improving peak speeds.

EVBox app vs third-party operator confusion

You see an EVBox-branded charger and download the EVBox app, but the session will not start because the station is operated by a different company. Many EVBox chargers are hardware only, with a separate operator managing access and billing.

Symptoms

• EVBox app does not show the station or cannot start a session
• You created an EVBox account but the charger asks for a different app or RFID card
• Charger has EVBox branding but the screen shows a different company name
• QR code on the charger leads to a different operator's website or app

How to Fix It

1. 1

   Check the operator name on the charger screen or signage

   Look at the charger display when it is idle. The operator name is usually shown on the welcome screen. Common operators using EVBox hardware include municipalities, parking companies, and energy providers.

2. 2

   Scan the QR code on the charger

   The QR code leads to the operator's platform, not necessarily EVBox. Scan it to find out which app or website you need.

3. 3

   Try a roaming RFID card

   If you have an RFID card from Shell Recharge, Chargemap, Plugsurfing, or another roaming provider, try tapping it. Many EVBox chargers accept roaming cards regardless of who operates them.

4. 4

   Search for the station in a multi-network app

   Apps like Chargemap or Shell Recharge aggregate many operators. Search for the charger location and you should see which operator runs it and how to start a session.

5. 5

   Download the correct operator's app

   Once you know who operates the station, download their app. The EVBox app only works for chargers that EVBox operates directly.

CHAdeMO connector availability varies

Some EVBox fast chargers have both CCS2 and CHAdeMO connectors, but the CHAdeMO connector may be out of service, removed, or restricted. CHAdeMO is being phased out in Europe and availability is declining.

Symptoms

• CHAdeMO connector is physically present but does not work
• Charger screen shows CHAdeMO as 'Unavailable' or 'Out of Order'
• CHAdeMO connector has been removed and the port is capped
• App shows CHAdeMO available but the physical connector is missing

How to Fix It

1. 1

   Check the charger before relying on CHAdeMO

   If your vehicle uses CHAdeMO, visually confirm the connector is present and functional at the station before planning your stop. App data may not reflect recent hardware changes.

2. 2

   Try the CHAdeMO connector even if the app status is unclear

   Plug in and attempt to start a session. Sometimes the app shows a stale status but the connector works fine.

3. 3

   Have a CCS2 adapter as a long-term solution

   If your vehicle only has CHAdeMO (common in older Nissan Leafs and some Mitsubishi models), CHAdeMO infrastructure is shrinking across Europe. A CHAdeMO-to-CCS2 adapter may be worth investigating for your specific vehicle.

4. 4

   Filter for CHAdeMO in your charging app

   When planning a route, filter specifically for stations with verified CHAdeMO connectors. User reviews and recent check-ins are more reliable than operator listings for CHAdeMO availability.

RFID card registration process unclear

To use an RFID card at EVBox-operated stations, you may need to register the card through the EVBox platform first. The registration process is not always obvious.

Symptoms

• New RFID card does not work at the charger even after ordering it from EVBox
• Card works at other networks but not at EVBox-operated stations
• You received a card but there are no activation instructions
• Online portal asks for a card number format you do not recognize

How to Fix It

1. 1

   Check the activation email

   When you order an RFID card from EVBox, they send an activation email. Check your inbox and spam folder. The email contains a link to activate the card in your EVBox account.

2. 2

   Add the card in the EVBox app or portal

   Log in to your EVBox account (app or web portal). Navigate to 'My cards' or 'Charge cards' and add the card using the number printed on it. The card does not work until it is linked to your account.

3. 3

   Wait for activation to propagate

   After registering the card, it may take up to 24 hours for the activation to reach all chargers. If the card does not work immediately after registration, try again the next day.

4. 4

   Use the app as a backup while the card activates

   You can start sessions through the EVBox app while waiting for your RFID card to activate. Tap 'Start charging' in the app and select the charger.

Charger offline due to firmware update

EVBox periodically pushes firmware updates to their chargers. During an update, the charger is temporarily unavailable. This can happen without warning and usually lasts 10 to 30 minutes.

Symptoms

• Charger screen shows 'Updating' or 'Maintenance' message
• Charger was working a few minutes ago but now shows as offline
• App shows the charger as unavailable with no estimated return time
• Multiple chargers at the same location are all offline simultaneously

How to Fix It

1. 1

   Wait 10 to 15 minutes

   Firmware updates on EVBox chargers usually complete within 10 to 30 minutes. If the charger shows an update message, it will likely come back online shortly.

2. 2

   Try another charger at the same location

   Firmware updates sometimes roll out one unit at a time. If there are multiple chargers, others may still be operational.

3. 3

   Check the app for status updates

   The operator's app or the EVBox app may show whether the outage is a scheduled update or an unexpected fault. Scheduled updates usually have an estimated completion time.

4. 4

   Move to an alternative station if you cannot wait

   If you need to charge immediately and the update is taking longer than expected, use a multi-network app to find the nearest available charger from any network.

Power sharing between connectors reduces speed

Some EVBox fast chargers share their power output between two connectors. When both are in use, each vehicle receives roughly half the charger's maximum power.

Symptoms

• Charging speed drops by half when a second car plugs into the same unit
• Dashboard shows 75 kW at a charger rated for 150 kW
• Speed suddenly increases when the car on the other connector finishes
• One side of the charger consistently delivers more power than the other

How to Fix It

1. 1

   Check if both connectors are on the same unit

   EVBox dual-connector chargers share one power module. If both CCS2 cables come from the same physical cabinet, they share power. Two separate cabinets are two independent chargers.

2. 2

   Choose an unoccupied charger unit if available

   If multiple charger units are available, pick one where the other connector is not in use. You will get the full rated power to yourself.

3. 3

   Understand how power sharing works

   Power sharing is dynamic. The charger allocates power based on what each vehicle can accept. If the other vehicle is at 80% and barely drawing power, you may get most of the charger's output even while sharing.

4. 4

   Wait for the other car to finish

   If your speed is reduced by sharing, it will increase when the other vehicle finishes. Check your dashboard periodically. The speed change happens automatically without any action from you.

5. 5

   Check your vehicle's own limits first

   Before assuming power sharing is the issue, verify that your car is not limiting the speed due to battery temperature, state of charge above 80%, or its own maximum DC charging rate.