Tesla Model 3 Charging at EVBox

Tesla Model 3 Charger Won't Start a Charging Session

You have plugged in your Model 3, the charge port light is doing something weird, and nothing is happening. This is one of the most common frustrations for EV drivers. The good news is that it is almost always fixable on the spot. The cause is usually authentication, the charge port latch, or the charger itself.

Symptoms

• Charge port LED flashes amber or red after plugging in the CCS2 connector
• Touchscreen shows an error message instead of the charging screen
• Charger display says 'Waiting for vehicle' or 'Authentication failed'
• Charge port will not open when pressing the button on the connector
• Supercharger session does not start automatically after plugging in

What to Do

1. 1

   Unplug and replug the connector firmly

   Pull the connector out completely. Wait 5 seconds. Push it back in firmly until you hear a click and the charge port LED turns green or starts pulsing. On CCS2, the lower DC pins need to seat fully.

2. 2

   Check the touchscreen for error messages

   Look at the charging screen on the touchscreen. It will tell you if there is an error, if scheduled charging is active, or if the car is waiting for something. If Scheduled Charging is delaying the session, tap 'Charge Now' to override it.

3. 3

   Authenticate with the charging network

   At non-Tesla chargers, open the network's app (Ionity, Shell Recharge, or whichever network). Start the session through the app, or tap your RFID card on the charger. At Tesla Superchargers, this step is automatic.

4. 4

   Try the manual charge port release if the port is stuck

   If the charge port will not open, try tapping your Tesla key card on the B-pillar and pressing the charge port door. You can also open it from the touchscreen under Controls. In freezing weather, pour lukewarm water around the port to melt ice. Never force it.

5. 5

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the Tesla logo appears. This restarts the infotainment system and can clear communication errors between the car and the charger.

6. 6

   Try a different charger or stall

   If nothing works, the charger may be faulty. Move to a different stall or station. At Superchargers, the Tesla app shows stall availability in real time.

Tesla Model 3 Payment Failed at the Charging Station

You plugged in, everything looked fine, and then the charger says payment failed. Or the session will not start because authentication did not go through. Payment problems are different at Tesla Superchargers versus non-Tesla CCS2 chargers, so the fix depends on where you are.

Symptoms

• Charger display shows 'Payment failed' or 'Transaction declined' after tapping a card
• Tesla Supercharger session will not start and the Tesla app shows a billing error
• Non-Tesla CCS2 charger shows 'Authentication failed' after scanning RFID or using an app
• Contactless payment terminal on the charger does not respond to your bank card
• Charging starts but stops after a few seconds with a payment-related error on the charger screen

What to Do

1. 1

   Check if this is a Tesla Supercharger or a non-Tesla station

   At Tesla Superchargers, payment is automatic through your Tesla account. At non-Tesla CCS2 chargers, you need to authenticate separately. The fix is completely different for each.

2. 2

   For Superchargers: update your payment method in the Tesla app

   Open the Tesla app, go to Account, then Payment. Check that your card is current and not expired. Add a new card if needed. Then try the Supercharger again. The session should start automatically after plugging in.

3. 3

   For non-Tesla chargers: authenticate through the network app

   Open the charging network's app (Ionity, Shell Recharge, Virta, or whichever network runs the charger). Select the charger, start the session, then plug in. Make sure the app shows your payment method is valid.

4. 4

   Try a different payment method at the charger

   If the contactless terminal failed, try the network's app instead. If the app failed, try an RFID card. If you do not have the network's app, some chargers accept ad-hoc payments through a QR code on the charger.

5. 5

   Call your bank if repeated transactions are declined

   If your card keeps getting declined at chargers, your bank may be blocking charging transactions. Call the number on the back of your card and let them know you are making EV charging payments. They can whitelist these merchants.

6. 6

   Move to a different charger if the payment terminal is broken

   If the charger's payment terminal is physically unresponsive, try a different stall. Report the broken terminal through the network's app so they can fix it.

Tesla Model 3 Charging Slower Than Expected at Charger

You plugged in your Model 3 expecting 175 kW and the touchscreen shows 50 kW. Or your home wallbox is stuck at 3 kW instead of 11 kW. Slow charging on the Model 3 is almost never a defect. It is usually the battery temperature, a charger limitation, or a setting you can fix on the touchscreen in under a minute.

Symptoms

• DC fast charging power well below the 175 kW maximum shown on the touchscreen
• AC home charging stuck at 3-4 kW instead of the expected 11 kW
• Charging speed drops sharply after reaching 50-60% on the touchscreen
• Supercharger shows lower kW than the stall is rated for
• Touchscreen charging animation shows a slow trickle instead of rapid charging

What to Do

1. 1

   Check the battery temperature on the touchscreen

   Tap the charging icon on the touchscreen. If the battery is cold, you will see a snowflake icon or a message about reduced charging speed. To fix this, use the Tesla nav to route to a Supercharger. The car will automatically precondition the battery during the drive.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is expected. For the fastest DC charging, arrive between 10-20%. The Model 3 LFP hits peak power in the 10-50% range.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in pairs (1A/1B, 2A/2B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers, this is not an issue.

4. 4

   Check the AC charge current limit

   On the touchscreen, go to Controls, then Charging. Look for the charge current slider or setting. Make sure it is set to the maximum value. This only affects AC charging, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds are still low, the charger may be degraded. Try a different stall at the same location. On non-Tesla CCS chargers, some stations deliver less power than advertised.

6. 6

   Check for a software update

   Go to Controls, then Software on the touchscreen. If an update is available, install it. Tesla occasionally adjusts charging curves through software updates.

EVBox app vs third-party operator confusion

You see an EVBox-branded charger and download the EVBox app, but the session will not start because the station is operated by a different company. Many EVBox chargers are hardware only, with a separate operator managing access and billing.

Symptoms

• EVBox app does not show the station or cannot start a session
• You created an EVBox account but the charger asks for a different app or RFID card
• Charger has EVBox branding but the screen shows a different company name
• QR code on the charger leads to a different operator's website or app

How to Fix It

1. 1

   Check the operator name on the charger screen or signage

   Look at the charger display when it is idle. The operator name is usually shown on the welcome screen. Common operators using EVBox hardware include municipalities, parking companies, and energy providers.

2. 2

   Scan the QR code on the charger

   The QR code leads to the operator's platform, not necessarily EVBox. Scan it to find out which app or website you need.

3. 3

   Try a roaming RFID card

   If you have an RFID card from Shell Recharge, Chargemap, Plugsurfing, or another roaming provider, try tapping it. Many EVBox chargers accept roaming cards regardless of who operates them.

4. 4

   Search for the station in a multi-network app

   Apps like Chargemap or Shell Recharge aggregate many operators. Search for the charger location and you should see which operator runs it and how to start a session.

5. 5

   Download the correct operator's app

   Once you know who operates the station, download their app. The EVBox app only works for chargers that EVBox operates directly.

CHAdeMO connector availability varies

Some EVBox fast chargers have both CCS2 and CHAdeMO connectors, but the CHAdeMO connector may be out of service, removed, or restricted. CHAdeMO is being phased out in Europe and availability is declining.

Symptoms

• CHAdeMO connector is physically present but does not work
• Charger screen shows CHAdeMO as 'Unavailable' or 'Out of Order'
• CHAdeMO connector has been removed and the port is capped
• App shows CHAdeMO available but the physical connector is missing

How to Fix It

1. 1

   Check the charger before relying on CHAdeMO

   If your vehicle uses CHAdeMO, visually confirm the connector is present and functional at the station before planning your stop. App data may not reflect recent hardware changes.

2. 2

   Try the CHAdeMO connector even if the app status is unclear

   Plug in and attempt to start a session. Sometimes the app shows a stale status but the connector works fine.

3. 3

   Have a CCS2 adapter as a long-term solution

   If your vehicle only has CHAdeMO (common in older Nissan Leafs and some Mitsubishi models), CHAdeMO infrastructure is shrinking across Europe. A CHAdeMO-to-CCS2 adapter may be worth investigating for your specific vehicle.

4. 4

   Filter for CHAdeMO in your charging app

   When planning a route, filter specifically for stations with verified CHAdeMO connectors. User reviews and recent check-ins are more reliable than operator listings for CHAdeMO availability.

RFID card registration process unclear

To use an RFID card at EVBox-operated stations, you may need to register the card through the EVBox platform first. The registration process is not always obvious.

Symptoms

• New RFID card does not work at the charger even after ordering it from EVBox
• Card works at other networks but not at EVBox-operated stations
• You received a card but there are no activation instructions
• Online portal asks for a card number format you do not recognize

How to Fix It

1. 1

   Check the activation email

   When you order an RFID card from EVBox, they send an activation email. Check your inbox and spam folder. The email contains a link to activate the card in your EVBox account.

2. 2

   Add the card in the EVBox app or portal

   Log in to your EVBox account (app or web portal). Navigate to 'My cards' or 'Charge cards' and add the card using the number printed on it. The card does not work until it is linked to your account.

3. 3

   Wait for activation to propagate

   After registering the card, it may take up to 24 hours for the activation to reach all chargers. If the card does not work immediately after registration, try again the next day.

4. 4

   Use the app as a backup while the card activates

   You can start sessions through the EVBox app while waiting for your RFID card to activate. Tap 'Start charging' in the app and select the charger.

Charger offline due to firmware update

EVBox periodically pushes firmware updates to their chargers. During an update, the charger is temporarily unavailable. This can happen without warning and usually lasts 10 to 30 minutes.

Symptoms

• Charger screen shows 'Updating' or 'Maintenance' message
• Charger was working a few minutes ago but now shows as offline
• App shows the charger as unavailable with no estimated return time
• Multiple chargers at the same location are all offline simultaneously

How to Fix It

1. 1

   Wait 10 to 15 minutes

   Firmware updates on EVBox chargers usually complete within 10 to 30 minutes. If the charger shows an update message, it will likely come back online shortly.

2. 2

   Try another charger at the same location

   Firmware updates sometimes roll out one unit at a time. If there are multiple chargers, others may still be operational.

3. 3

   Check the app for status updates

   The operator's app or the EVBox app may show whether the outage is a scheduled update or an unexpected fault. Scheduled updates usually have an estimated completion time.

4. 4

   Move to an alternative station if you cannot wait

   If you need to charge immediately and the update is taking longer than expected, use a multi-network app to find the nearest available charger from any network.

Power sharing between connectors reduces speed

Some EVBox fast chargers share their power output between two connectors. When both are in use, each vehicle receives roughly half the charger's maximum power.

Symptoms

• Charging speed drops by half when a second car plugs into the same unit
• Dashboard shows 75 kW at a charger rated for 150 kW
• Speed suddenly increases when the car on the other connector finishes
• One side of the charger consistently delivers more power than the other

How to Fix It

1. 1

   Check if both connectors are on the same unit

   EVBox dual-connector chargers share one power module. If both CCS2 cables come from the same physical cabinet, they share power. Two separate cabinets are two independent chargers.

2. 2

   Choose an unoccupied charger unit if available

   If multiple charger units are available, pick one where the other connector is not in use. You will get the full rated power to yourself.

3. 3

   Understand how power sharing works

   Power sharing is dynamic. The charger allocates power based on what each vehicle can accept. If the other vehicle is at 80% and barely drawing power, you may get most of the charger's output even while sharing.

4. 4

   Wait for the other car to finish

   If your speed is reduced by sharing, it will increase when the other vehicle finishes. Check your dashboard periodically. The speed change happens automatically without any action from you.

5. 5

   Check your vehicle's own limits first

   Before assuming power sharing is the issue, verify that your car is not limiting the speed due to battery temperature, state of charge above 80%, or its own maximum DC charging rate.