BMW i5 Charging at Badenova

BMW i5 eDrive40 Charger Won't Start: Fix Guide Now

You have connected your BMW i5 to a charger, but the session will not start. The charger sits idle, iDrive shows nothing, or you get an error message. This is one of the most reported problems at public chargers, and the fix is usually simple.

Symptoms

• The charger screen stays on 'connect vehicle' after plugging in the CCS2 cable
• iDrive does not show any charging activity
• The charge port LED on the i5 does not illuminate
• An error code appears on the charger display
• The connector does not lock into the charge port

What to Do

1. 1

   Make sure the i5 is unlocked

   The charge port only opens and accepts a connector when the car is unlocked. Use the key fob or My BMW app to unlock if needed.

2. 2

   Seat the connector firmly

   Push the CCS2 or Type 2 plug straight into the port until it clicks and locks. The charging port is on the rear right of the i5. Do not twist or angle the connector.

3. 3

   Complete authentication at the charger

   Tap your RFID card, start the session in the charging app, or pay via contactless. The charger needs authorization before it sends power to your i5.

4. 4

   Check iDrive for scheduling conflicts

   Open iDrive and navigate to Charging, then Charging Settings. If a departure time or scheduled window is active, switch to 'Charge Immediately' to override it.

5. 5

   Unplug and reconnect

   Remove the connector, wait 15 seconds, then plug in again. This forces a new handshake between the i5 and the charger, which resolves many communication issues.

6. 6

   Move to another charger

   If nothing works, the charger is likely faulty. Try another stall or station. Report the broken charger through the network app so others are warned.

BMW i5 Charging Payment Failed: Solutions That Work

Your BMW i5 is plugged in and ready, but the charger will not accept your payment. Whether it is an RFID card that gets no response, an app that throws an error, or a declined bank card, this stops you from charging. Here is how to get past it quickly.

Symptoms

• Charger shows 'authentication failed' or 'payment error'
• RFID card tap produces no response on the charger
• Charging app fails to start the session with a payment error
• Contactless bank card is declined at the charger terminal
• Session starts but immediately cancels with a billing error

What to Do

1. 1

   Switch to a different payment method

   Try another RFID card, a different charging app, or contactless bank card. Having at least two options means one failure does not strand you.

2. 2

   Verify your account status

   Open the charging app and check your payment method, balance, and subscription status. Fix any issues before retrying.

3. 3

   Check which networks this charger accepts

   Look for network logos on the charger unit. If your provider is not listed, you need ad-hoc payment or a different provider.

4. 4

   Scan the QR code for ad-hoc payment

   Most modern European chargers have a QR code. Scan it with your phone to open a web-based payment page. You can pay with any credit or debit card, no app needed.

5. 5

   Cancel and restart the session

   If the payment seemed to process but charging did not start, cancel the session in the app and try again. A fresh authorization attempt often works.

6. 6

   Call the network's support number

   The charger should display a support phone number. The operator can sometimes authorize sessions remotely or troubleshoot billing issues in real time.

BMW i5 eDrive40 Charging Too Slow: Causes and Fixes

Your BMW i5 eDrive40 can charge at up to 205kW on a DC fast charger, which is impressive for a 400V car. But if you are seeing far lower numbers on the iDrive display, something is limiting the power. Most causes are easy to identify and fix.

Symptoms

• DC charging power shown in iDrive is well below 205kW
• Charging takes much longer than expected for the 81.2kWh battery
• Speed drops drastically above 50% state of charge
• AC charging is stuck at 11kW even at a 22kW station
• iDrive displays a battery temperature warning or conditioning message

What to Do

1. 1

   Check current power in iDrive

   Open the charging screen on iDrive to see the live kW figure, battery temperature, and estimated completion time. This tells you immediately whether the car or the charger is the limiting factor.

2. 2

   Precondition the battery before arriving

   Enter the charging station as a destination in iDrive navigation. The i5 will automatically warm (or cool) the battery to optimal charging temperature while you drive. This can double your initial charging speed in winter.

3. 3

   Choose a high-power charger

   Use the BMW app or a charger map to find stations rated at 200kW or above. Ionity, Fastned, and some Shell Recharge stations offer 300kW+ chargers that let the i5 reach its peak.

4. 4

   Avoid power-sharing stalls

   At charger parks with paired stalls (A1/A2, B1/B2), choose a pair where the other stall is empty. This gives your i5 the full charger output.

5. 5

   Charge in the optimal range

   Plan your stops to arrive between 5% and 15% and leave at 80%. This keeps you in the fastest part of the i5's charging curve and minimizes time per kWh added.

6. 6

   Install software updates

   BMW pushes OTA updates that can improve charging performance. Check iDrive under Settings, then Software Update, and install any pending updates.

App-only payment with no backup option at the charger

Badenova chargers require the Badenova app to start a session. There is no contactless card reader on the charger and no RFID option. If the app is not working, you cannot charge.

Symptoms

• The charger has no contactless payment terminal or RFID reader
• You do not have the Badenova app installed and cannot download it at the station
• The app will not load or crashes when trying to start a session
• You have no mobile data signal at the station and cannot use the app

How to Fix It

1. 1

   Install and set up the Badenova app before you need it

   Download the Badenova app and create an account with a valid payment method before your first visit. Trying to set up an account at the station, possibly with poor signal, is a frustrating experience you can avoid.

2. 2

   Try connecting to Wi-Fi if your mobile data is weak

   Some Badenova stations or nearby businesses may offer Wi-Fi. If your mobile data is too weak to load the app, look for available networks. Even a slow connection is enough to start a session.

3. 3

   Restart the app or your phone

   If the app crashes or freezes, close it completely and reopen it. If that does not help, restart your phone. App-only chargers depend entirely on your phone working, so basic troubleshooting matters.

4. 4

   Drive to an alternative charger with contactless payment

   If the app is genuinely broken or you have no signal, you need a charger that accepts contactless payment or RFID. Check another charging app (Ionity, EnBW mobility+, or a roaming app) for the nearest alternative station. This is the downside of app-only networks: no app, no charge.

5. 5

   Check if a roaming app supports Badenova stations

   Some roaming platforms (like EnBW mobility+ or Maingau) may include Badenova stations. If you already have a roaming app installed, search for the station there. You can sometimes start a session through a roaming app when the native app is not cooperating.

Regional coverage limited to southwestern Germany

Badenova's network is concentrated in the Baden-Württemberg region, especially around Freiburg, the Upper Rhine area, and surrounding towns. Outside this region, you will not find Badenova chargers.

Symptoms

• The Badenova app shows no stations outside the Freiburg/Baden region
• You assumed Badenova coverage would extend along the Autobahn but it does not
• The nearest Badenova station is 100 km or more from your destination
• You are driving through Germany and planned stops based on Badenova but ran into coverage gaps

How to Fix It

1. 1

   Check Badenova coverage before planning your route

   Open the Badenova app and look at the station map. You will see that coverage is regional, not national. If your trip extends beyond southwestern Germany, you need additional networks.

2. 2

   Install apps for national German networks

   For travel across Germany, install EnBW mobility+ (large national network), Ionity (Autobahn-focused), or Fastned. These networks have stations along major highways throughout the country.

3. 3

   Use a roaming app for multi-network access

   EnBW mobility+ and Maingau EinfachStromLaden work as roaming apps that access chargers from dozens of operators. One app covers you across Germany instead of installing a separate app for each regional operator.

4. 4

   Plan with a multi-network route planner for longer trips

   A Better Routeplanner (ABRP) shows chargers from all operators. Enter your vehicle model and destination to get optimized stops. Badenova stations will appear where they exist, and other networks fill the gaps.

App interface in German only

The Badenova app is designed for the German market and the interface is in German. If German is not your language, navigating the app takes extra effort.

Symptoms

• All app menus and buttons are in German
• Error messages from the charger (shown in the app) are in German
• You cannot find the 'start session' button because labels are in German
• Account setup and payment forms are in German

How to Fix It

1. 1

   Learn the key German charging terms

   'Laden starten' means start charging. 'Laden beenden' means stop charging. 'Verfügbar' means available. 'Besetzt' means occupied. 'Außer Betrieb' means out of order. 'Bezahlung' means payment. These cover most of what you need.

2. 2

   Set up your account at home with a translation tool open

   Create your Badenova account and add your payment method at home where you can take your time. Use Google Translate or a similar tool to translate the forms. You only need to do this once.

3. 3

   Use your phone's built-in app translation

   On Android, the system can translate app interfaces into your language. On iOS, you can screenshot any page and use the built-in translation feature. This helps with settings you do not visit often.

4. 4

   Memorize the session flow

   The flow is the same every time: open app, find station on map, select charger, tap start. Once you know the sequence, the German labels are less of a barrier. Practice at home before your first real session.

Stations at company premises with limited access hours

Some Badenova chargers are installed at business locations or company parking areas that have restricted access during evenings, weekends, or holidays.

Symptoms

• You arrived at a station and the parking area is gated or locked
• The charger is accessible during business hours but not when you need it
• The app shows the station as available but you physically cannot reach it
• Weekend or holiday access is restricted

How to Fix It

1. 1

   Check the station details in the app for access hours

   Some Badenova stations list opening hours or access restrictions in the station details. Before driving there, look for notes about access times, especially if you plan to charge in the evening, early morning, or on weekends.

2. 2

   Look for a gate code or intercom

   Some company premises with public chargers provide a gate code or intercom button for EV drivers. Check the station listing in the app or look for instructions near the gate entrance.

3. 3

   Drive to a publicly accessible alternative

   If the station is behind a locked gate, your only option is to find another charger. Check the Badenova app or a roaming app for the next nearest station that is on a public road or in a publicly accessible parking area.

4. 4

   Prefer stations at public locations when planning ahead

   For reliability, prioritize Badenova stations that are on public streets or at commercial locations (supermarkets, public parking garages). These are accessible 24/7 regardless of business hours.

Fewer fallback stations when a charger is broken

Badenova is a smaller regional network. If the charger you planned to use is out of order, the next Badenova station may be far away. Larger networks offer more alternatives within a short drive.

Symptoms

• You arrived and the charger shows 'Außer Betrieb' (out of order)
• The next Badenova station is 20 km or more away
• You do not have another charging app installed
• Your battery is low and you need to charge now

How to Fix It

1. 1

   Check for other Badenova stations nearby

   Open the Badenova app and look at the map for alternative stations in the area. Even in their core region, stations may be spaced 10 to 30 km apart.

2. 2

   Search for chargers from other operators

   Open a roaming app (EnBW mobility+, Maingau, or Chargemap) and search for any available fast charger nearby, regardless of operator. In Baden-Württemberg, EnBW has good coverage that often fills Badenova's gaps.

3. 3

   Look for AC chargers as a last resort

   If no DC fast charger is available, an AC charger at a hotel, parking garage, or public lot can add enough range to reach the next working fast charger. It is slower, but it keeps you moving.

4. 4

   Report the broken charger in the Badenova app

   Let Badenova know the charger is out of order. Smaller networks depend on user reports to dispatch maintenance. Your report helps the next driver.

5. 5

   Always have a backup network app installed

   With any smaller regional network, carry at least one additional charging app (like EnBW mobility+ or Ionity) as insurance. Setting this up takes five minutes and saves you from being stranded.