Tesla Model 3 Charging at Badenova

Tesla Model 3 Charger Won't Start a Charging Session

You have plugged in your Model 3, the charge port light is doing something weird, and nothing is happening. This is one of the most common frustrations for EV drivers. The good news is that it is almost always fixable on the spot. The cause is usually authentication, the charge port latch, or the charger itself.

Symptoms

• Charge port LED flashes amber or red after plugging in the CCS2 connector
• Touchscreen shows an error message instead of the charging screen
• Charger display says 'Waiting for vehicle' or 'Authentication failed'
• Charge port will not open when pressing the button on the connector
• Supercharger session does not start automatically after plugging in

What to Do

1. 1

   Unplug and replug the connector firmly

   Pull the connector out completely. Wait 5 seconds. Push it back in firmly until you hear a click and the charge port LED turns green or starts pulsing. On CCS2, the lower DC pins need to seat fully.

2. 2

   Check the touchscreen for error messages

   Look at the charging screen on the touchscreen. It will tell you if there is an error, if scheduled charging is active, or if the car is waiting for something. If Scheduled Charging is delaying the session, tap 'Charge Now' to override it.

3. 3

   Authenticate with the charging network

   At non-Tesla chargers, open the network's app (Ionity, Shell Recharge, or whichever network). Start the session through the app, or tap your RFID card on the charger. At Tesla Superchargers, this step is automatic.

4. 4

   Try the manual charge port release if the port is stuck

   If the charge port will not open, try tapping your Tesla key card on the B-pillar and pressing the charge port door. You can also open it from the touchscreen under Controls. In freezing weather, pour lukewarm water around the port to melt ice. Never force it.

5. 5

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the Tesla logo appears. This restarts the infotainment system and can clear communication errors between the car and the charger.

6. 6

   Try a different charger or stall

   If nothing works, the charger may be faulty. Move to a different stall or station. At Superchargers, the Tesla app shows stall availability in real time.

Tesla Model 3 Payment Failed at the Charging Station

You plugged in, everything looked fine, and then the charger says payment failed. Or the session will not start because authentication did not go through. Payment problems are different at Tesla Superchargers versus non-Tesla CCS2 chargers, so the fix depends on where you are.

Symptoms

• Charger display shows 'Payment failed' or 'Transaction declined' after tapping a card
• Tesla Supercharger session will not start and the Tesla app shows a billing error
• Non-Tesla CCS2 charger shows 'Authentication failed' after scanning RFID or using an app
• Contactless payment terminal on the charger does not respond to your bank card
• Charging starts but stops after a few seconds with a payment-related error on the charger screen

What to Do

1. 1

   Check if this is a Tesla Supercharger or a non-Tesla station

   At Tesla Superchargers, payment is automatic through your Tesla account. At non-Tesla CCS2 chargers, you need to authenticate separately. The fix is completely different for each.

2. 2

   For Superchargers: update your payment method in the Tesla app

   Open the Tesla app, go to Account, then Payment. Check that your card is current and not expired. Add a new card if needed. Then try the Supercharger again. The session should start automatically after plugging in.

3. 3

   For non-Tesla chargers: authenticate through the network app

   Open the charging network's app (Ionity, Shell Recharge, Virta, or whichever network runs the charger). Select the charger, start the session, then plug in. Make sure the app shows your payment method is valid.

4. 4

   Try a different payment method at the charger

   If the contactless terminal failed, try the network's app instead. If the app failed, try an RFID card. If you do not have the network's app, some chargers accept ad-hoc payments through a QR code on the charger.

5. 5

   Call your bank if repeated transactions are declined

   If your card keeps getting declined at chargers, your bank may be blocking charging transactions. Call the number on the back of your card and let them know you are making EV charging payments. They can whitelist these merchants.

6. 6

   Move to a different charger if the payment terminal is broken

   If the charger's payment terminal is physically unresponsive, try a different stall. Report the broken terminal through the network's app so they can fix it.

Tesla Model 3 Charging Slower Than Expected at Charger

You plugged in your Model 3 expecting 175 kW and the touchscreen shows 50 kW. Or your home wallbox is stuck at 3 kW instead of 11 kW. Slow charging on the Model 3 is almost never a defect. It is usually the battery temperature, a charger limitation, or a setting you can fix on the touchscreen in under a minute.

Symptoms

• DC fast charging power well below the 175 kW maximum shown on the touchscreen
• AC home charging stuck at 3-4 kW instead of the expected 11 kW
• Charging speed drops sharply after reaching 50-60% on the touchscreen
• Supercharger shows lower kW than the stall is rated for
• Touchscreen charging animation shows a slow trickle instead of rapid charging

What to Do

1. 1

   Check the battery temperature on the touchscreen

   Tap the charging icon on the touchscreen. If the battery is cold, you will see a snowflake icon or a message about reduced charging speed. To fix this, use the Tesla nav to route to a Supercharger. The car will automatically precondition the battery during the drive.

2. 2

   Check your state of charge

   If you are above 80%, the slower speed is expected. For the fastest DC charging, arrive between 10-20%. The Model 3 LFP hits peak power in the 10-50% range.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in pairs (1A/1B, 2A/2B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers, this is not an issue.

4. 4

   Check the AC charge current limit

   On the touchscreen, go to Controls, then Charging. Look for the charge current slider or setting. Make sure it is set to the maximum value. This only affects AC charging, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds are still low, the charger may be degraded. Try a different stall at the same location. On non-Tesla CCS chargers, some stations deliver less power than advertised.

6. 6

   Check for a software update

   Go to Controls, then Software on the touchscreen. If an update is available, install it. Tesla occasionally adjusts charging curves through software updates.

App-only payment with no backup option at the charger

Badenova chargers require the Badenova app to start a session. There is no contactless card reader on the charger and no RFID option. If the app is not working, you cannot charge.

Symptoms

• The charger has no contactless payment terminal or RFID reader
• You do not have the Badenova app installed and cannot download it at the station
• The app will not load or crashes when trying to start a session
• You have no mobile data signal at the station and cannot use the app

How to Fix It

1. 1

   Install and set up the Badenova app before you need it

   Download the Badenova app and create an account with a valid payment method before your first visit. Trying to set up an account at the station, possibly with poor signal, is a frustrating experience you can avoid.

2. 2

   Try connecting to Wi-Fi if your mobile data is weak

   Some Badenova stations or nearby businesses may offer Wi-Fi. If your mobile data is too weak to load the app, look for available networks. Even a slow connection is enough to start a session.

3. 3

   Restart the app or your phone

   If the app crashes or freezes, close it completely and reopen it. If that does not help, restart your phone. App-only chargers depend entirely on your phone working, so basic troubleshooting matters.

4. 4

   Drive to an alternative charger with contactless payment

   If the app is genuinely broken or you have no signal, you need a charger that accepts contactless payment or RFID. Check another charging app (Ionity, EnBW mobility+, or a roaming app) for the nearest alternative station. This is the downside of app-only networks: no app, no charge.

5. 5

   Check if a roaming app supports Badenova stations

   Some roaming platforms (like EnBW mobility+ or Maingau) may include Badenova stations. If you already have a roaming app installed, search for the station there. You can sometimes start a session through a roaming app when the native app is not cooperating.

Regional coverage limited to southwestern Germany

Badenova's network is concentrated in the Baden-Württemberg region, especially around Freiburg, the Upper Rhine area, and surrounding towns. Outside this region, you will not find Badenova chargers.

Symptoms

• The Badenova app shows no stations outside the Freiburg/Baden region
• You assumed Badenova coverage would extend along the Autobahn but it does not
• The nearest Badenova station is 100 km or more from your destination
• You are driving through Germany and planned stops based on Badenova but ran into coverage gaps

How to Fix It

1. 1

   Check Badenova coverage before planning your route

   Open the Badenova app and look at the station map. You will see that coverage is regional, not national. If your trip extends beyond southwestern Germany, you need additional networks.

2. 2

   Install apps for national German networks

   For travel across Germany, install EnBW mobility+ (large national network), Ionity (Autobahn-focused), or Fastned. These networks have stations along major highways throughout the country.

3. 3

   Use a roaming app for multi-network access

   EnBW mobility+ and Maingau EinfachStromLaden work as roaming apps that access chargers from dozens of operators. One app covers you across Germany instead of installing a separate app for each regional operator.

4. 4

   Plan with a multi-network route planner for longer trips

   A Better Routeplanner (ABRP) shows chargers from all operators. Enter your vehicle model and destination to get optimized stops. Badenova stations will appear where they exist, and other networks fill the gaps.

App interface in German only

The Badenova app is designed for the German market and the interface is in German. If German is not your language, navigating the app takes extra effort.

Symptoms

• All app menus and buttons are in German
• Error messages from the charger (shown in the app) are in German
• You cannot find the 'start session' button because labels are in German
• Account setup and payment forms are in German

How to Fix It

1. 1

   Learn the key German charging terms

   'Laden starten' means start charging. 'Laden beenden' means stop charging. 'Verfügbar' means available. 'Besetzt' means occupied. 'Außer Betrieb' means out of order. 'Bezahlung' means payment. These cover most of what you need.

2. 2

   Set up your account at home with a translation tool open

   Create your Badenova account and add your payment method at home where you can take your time. Use Google Translate or a similar tool to translate the forms. You only need to do this once.

3. 3

   Use your phone's built-in app translation

   On Android, the system can translate app interfaces into your language. On iOS, you can screenshot any page and use the built-in translation feature. This helps with settings you do not visit often.

4. 4

   Memorize the session flow

   The flow is the same every time: open app, find station on map, select charger, tap start. Once you know the sequence, the German labels are less of a barrier. Practice at home before your first real session.

Stations at company premises with limited access hours

Some Badenova chargers are installed at business locations or company parking areas that have restricted access during evenings, weekends, or holidays.

Symptoms

• You arrived at a station and the parking area is gated or locked
• The charger is accessible during business hours but not when you need it
• The app shows the station as available but you physically cannot reach it
• Weekend or holiday access is restricted

How to Fix It

1. 1

   Check the station details in the app for access hours

   Some Badenova stations list opening hours or access restrictions in the station details. Before driving there, look for notes about access times, especially if you plan to charge in the evening, early morning, or on weekends.

2. 2

   Look for a gate code or intercom

   Some company premises with public chargers provide a gate code or intercom button for EV drivers. Check the station listing in the app or look for instructions near the gate entrance.

3. 3

   Drive to a publicly accessible alternative

   If the station is behind a locked gate, your only option is to find another charger. Check the Badenova app or a roaming app for the next nearest station that is on a public road or in a publicly accessible parking area.

4. 4

   Prefer stations at public locations when planning ahead

   For reliability, prioritize Badenova stations that are on public streets or at commercial locations (supermarkets, public parking garages). These are accessible 24/7 regardless of business hours.

Fewer fallback stations when a charger is broken

Badenova is a smaller regional network. If the charger you planned to use is out of order, the next Badenova station may be far away. Larger networks offer more alternatives within a short drive.

Symptoms

• You arrived and the charger shows 'Außer Betrieb' (out of order)
• The next Badenova station is 20 km or more away
• You do not have another charging app installed
• Your battery is low and you need to charge now

How to Fix It

1. 1

   Check for other Badenova stations nearby

   Open the Badenova app and look at the map for alternative stations in the area. Even in their core region, stations may be spaced 10 to 30 km apart.

2. 2

   Search for chargers from other operators

   Open a roaming app (EnBW mobility+, Maingau, or Chargemap) and search for any available fast charger nearby, regardless of operator. In Baden-Württemberg, EnBW has good coverage that often fills Badenova's gaps.

3. 3

   Look for AC chargers as a last resort

   If no DC fast charger is available, an AC charger at a hotel, parking garage, or public lot can add enough range to reach the next working fast charger. It is slower, but it keeps you moving.

4. 4

   Report the broken charger in the Badenova app

   Let Badenova know the charger is out of order. Smaller networks depend on user reports to dispatch maintenance. Your report helps the next driver.

5. 5

   Always have a backup network app installed

   With any smaller regional network, carry at least one additional charging app (like EnBW mobility+ or Ionity) as insurance. Setting this up takes five minutes and saves you from being stranded.