Audi e-tron GT Charging at EVBox

Audi e-tron GT Charger Won't Start Charging

You have plugged in your e-tron GT, but nothing happens. The MMI screen stays silent or shows an error. The e-tron GT has two charge ports, one on the left rear for AC and one on the right rear for DC, which can add confusion. This is frustrating, but it is almost always fixable on the spot.

Symptoms

• CCS2 or Type 2 connector plugged in but no charging indicator on the MMI touchscreen
• Charger screen shows 'Waiting for vehicle' or stays on the start screen
• e-tron GT charge port LED blinks but charging never begins
• Authentication succeeds on the charger but the session fails to start
• Plugged into the wrong charge port for the type of charging

What to Do

1. 1

   Verify you are using the correct charge port

   For DC fast charging, use the charge port on the right rear of the car. For AC charging with a Type 2 cable, use the charge port on the left rear. Using the wrong port is the most common cause of a failed start on the e-tron GT.

2. 2

   Check for a charging schedule or departure timer

   On the MMI touchscreen, go to the e-tron charging settings. If a timer or departure schedule is active, switch it to charge immediately or turn off the timer. You can also check the myAudi app for active schedules.

3. 3

   Unplug and reconnect firmly

   Remove the connector, wait 10 seconds, then reinsert it firmly into the correct charge port until you hear a clear click. Watch the charge port LED for a steady response.

4. 4

   Restart the charger session

   On the charger, end the current session if one is active. Then start a new session by tapping your RFID card, using contactless payment, or restarting in the charger operator's app.

5. 5

   Reboot the MMI system

   Press and hold the power button on the MMI touchscreen for about 10 seconds until the screen goes dark and restarts. Once it is back, try plugging in again. This resets the charging communication on the car's side.

6. 6

   Try a different charger

   If the station has multiple stalls, move to a different one. Some chargers have firmware issues that cause 800V handshake failures. A different unit at the same station may work fine.

Audi e-tron GT Charging Payment Failed at Station

You are at the charger, your e-tron GT is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting. Payment failures at public chargers are common and usually have nothing to do with your car. Here is how to get charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger's reader
• myAudi or Audi charging app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector on the right rear
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having two or three payment options gives you the best chance of getting going.

2. 2

   Check the myAudi app

   Open the myAudi app on your phone. Make sure your Audi charging account is active, your payment method is valid, and Plug & Charge is enabled if you want to use it. Try starting the session remotely through the app.

3. 3

   Scan the charger's QR code

   Most public chargers have a QR code on the unit. Scanning it with your phone's camera opens the operator's payment page. You can usually pay with a credit card through the browser without downloading an app.

4. 4

   Check your bank app for blocked transactions

   Open your banking app and check for any flagged or blocked transactions. Some banks require you to approve the charge manually. If you see a notification, approve it and try the payment again.

5. 5

   Try Plug & Charge if available

   If the charger supports Plug & Charge and your e-tron GT has it activated through the myAudi app, simply unplug and replug the CCS2 connector into the right rear charge port. The payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works at this station, the charger's payment system may be down entirely. Find a nearby alternative using the myAudi app or the e-tron GT's built-in charger finder on the MMI touchscreen.

Audi e-tron GT Charging Slower Than Expected

You plugged in your e-tron GT expecting 270 kW and the MMI touchscreen shows 50 kW. With an 800V architecture designed for ultra-fast charging, this is especially frustrating. Slow charging on the e-tron GT is almost never a defect. It is usually the charger's capability, the battery temperature, or a mismatch between the station's voltage and the car's 800V system.

Symptoms

• DC fast charging speed well below the 270 kW maximum shown on the MMI touchscreen
• AC home charging stuck at 3-4 kW instead of the full 11 kW or optional 22 kW
• Charging speed drops significantly after reaching 50-60% state of charge
• The e-tron GT charges at similar speeds to 400V vehicles despite having 800V architecture
• MMI display shows lower power than the charger's rated output

What to Do

1. 1

   Verify the charger supports 800V and high power

   Check the charger's label or the operator's app for the maximum power output and voltage. For the e-tron GT to reach its peak 270 kW, you need a charger rated for at least 270 kW at 800V. A 150 kW or 400V charger will work but at much lower speeds.

2. 2

   Check the battery temperature

   Look at the charging screen on the MMI touchscreen. If the battery is cold, use the navigation system to route to the fast charger. The e-tron GT will precondition the battery on the way using its heat pump. If you are already at the charger, driving for 15-20 minutes and returning can help.

3. 3

   Check your state of charge

   Look at the digital instrument cluster or MMI screen. If you are above 80%, the slower speed is expected. For the fastest charging, arrive at the charger between 5-20% and charge to 80%.

4. 4

   Verify the charger is not sharing power

   Look at the charger unit. If there are two cables and someone is using the other one, you may be sharing power. Move to an unoccupied charger if one is available.

5. 5

   Check the AC charge current setting

   On the MMI touchscreen, go to the e-tron charging settings. Make sure the AC charge current is set to maximum. If you have the optional 22 kW onboard charger, verify your wallbox supports it.

6. 6

   Try a different charger

   If the speed is still low, the charger itself may be degraded or faulty. Look for Ionity, Electrify America, or other 350 kW networks that support 800V to get the best speeds from your e-tron GT.

EVBox app vs third-party operator confusion

You see an EVBox-branded charger and download the EVBox app, but the session will not start because the station is operated by a different company. Many EVBox chargers are hardware only, with a separate operator managing access and billing.

Symptoms

• EVBox app does not show the station or cannot start a session
• You created an EVBox account but the charger asks for a different app or RFID card
• Charger has EVBox branding but the screen shows a different company name
• QR code on the charger leads to a different operator's website or app

How to Fix It

1. 1

   Check the operator name on the charger screen or signage

   Look at the charger display when it is idle. The operator name is usually shown on the welcome screen. Common operators using EVBox hardware include municipalities, parking companies, and energy providers.

2. 2

   Scan the QR code on the charger

   The QR code leads to the operator's platform, not necessarily EVBox. Scan it to find out which app or website you need.

3. 3

   Try a roaming RFID card

   If you have an RFID card from Shell Recharge, Chargemap, Plugsurfing, or another roaming provider, try tapping it. Many EVBox chargers accept roaming cards regardless of who operates them.

4. 4

   Search for the station in a multi-network app

   Apps like Chargemap or Shell Recharge aggregate many operators. Search for the charger location and you should see which operator runs it and how to start a session.

5. 5

   Download the correct operator's app

   Once you know who operates the station, download their app. The EVBox app only works for chargers that EVBox operates directly.

CHAdeMO connector availability varies

Some EVBox fast chargers have both CCS2 and CHAdeMO connectors, but the CHAdeMO connector may be out of service, removed, or restricted. CHAdeMO is being phased out in Europe and availability is declining.

Symptoms

• CHAdeMO connector is physically present but does not work
• Charger screen shows CHAdeMO as 'Unavailable' or 'Out of Order'
• CHAdeMO connector has been removed and the port is capped
• App shows CHAdeMO available but the physical connector is missing

How to Fix It

1. 1

   Check the charger before relying on CHAdeMO

   If your vehicle uses CHAdeMO, visually confirm the connector is present and functional at the station before planning your stop. App data may not reflect recent hardware changes.

2. 2

   Try the CHAdeMO connector even if the app status is unclear

   Plug in and attempt to start a session. Sometimes the app shows a stale status but the connector works fine.

3. 3

   Have a CCS2 adapter as a long-term solution

   If your vehicle only has CHAdeMO (common in older Nissan Leafs and some Mitsubishi models), CHAdeMO infrastructure is shrinking across Europe. A CHAdeMO-to-CCS2 adapter may be worth investigating for your specific vehicle.

4. 4

   Filter for CHAdeMO in your charging app

   When planning a route, filter specifically for stations with verified CHAdeMO connectors. User reviews and recent check-ins are more reliable than operator listings for CHAdeMO availability.

RFID card registration process unclear

To use an RFID card at EVBox-operated stations, you may need to register the card through the EVBox platform first. The registration process is not always obvious.

Symptoms

• New RFID card does not work at the charger even after ordering it from EVBox
• Card works at other networks but not at EVBox-operated stations
• You received a card but there are no activation instructions
• Online portal asks for a card number format you do not recognize

How to Fix It

1. 1

   Check the activation email

   When you order an RFID card from EVBox, they send an activation email. Check your inbox and spam folder. The email contains a link to activate the card in your EVBox account.

2. 2

   Add the card in the EVBox app or portal

   Log in to your EVBox account (app or web portal). Navigate to 'My cards' or 'Charge cards' and add the card using the number printed on it. The card does not work until it is linked to your account.

3. 3

   Wait for activation to propagate

   After registering the card, it may take up to 24 hours for the activation to reach all chargers. If the card does not work immediately after registration, try again the next day.

4. 4

   Use the app as a backup while the card activates

   You can start sessions through the EVBox app while waiting for your RFID card to activate. Tap 'Start charging' in the app and select the charger.

Charger offline due to firmware update

EVBox periodically pushes firmware updates to their chargers. During an update, the charger is temporarily unavailable. This can happen without warning and usually lasts 10 to 30 minutes.

Symptoms

• Charger screen shows 'Updating' or 'Maintenance' message
• Charger was working a few minutes ago but now shows as offline
• App shows the charger as unavailable with no estimated return time
• Multiple chargers at the same location are all offline simultaneously

How to Fix It

1. 1

   Wait 10 to 15 minutes

   Firmware updates on EVBox chargers usually complete within 10 to 30 minutes. If the charger shows an update message, it will likely come back online shortly.

2. 2

   Try another charger at the same location

   Firmware updates sometimes roll out one unit at a time. If there are multiple chargers, others may still be operational.

3. 3

   Check the app for status updates

   The operator's app or the EVBox app may show whether the outage is a scheduled update or an unexpected fault. Scheduled updates usually have an estimated completion time.

4. 4

   Move to an alternative station if you cannot wait

   If you need to charge immediately and the update is taking longer than expected, use a multi-network app to find the nearest available charger from any network.

Power sharing between connectors reduces speed

Some EVBox fast chargers share their power output between two connectors. When both are in use, each vehicle receives roughly half the charger's maximum power.

Symptoms

• Charging speed drops by half when a second car plugs into the same unit
• Dashboard shows 75 kW at a charger rated for 150 kW
• Speed suddenly increases when the car on the other connector finishes
• One side of the charger consistently delivers more power than the other

How to Fix It

1. 1

   Check if both connectors are on the same unit

   EVBox dual-connector chargers share one power module. If both CCS2 cables come from the same physical cabinet, they share power. Two separate cabinets are two independent chargers.

2. 2

   Choose an unoccupied charger unit if available

   If multiple charger units are available, pick one where the other connector is not in use. You will get the full rated power to yourself.

3. 3

   Understand how power sharing works

   Power sharing is dynamic. The charger allocates power based on what each vehicle can accept. If the other vehicle is at 80% and barely drawing power, you may get most of the charger's output even while sharing.

4. 4

   Wait for the other car to finish

   If your speed is reduced by sharing, it will increase when the other vehicle finishes. Check your dashboard periodically. The speed change happens automatically without any action from you.

5. 5

   Check your vehicle's own limits first

   Before assuming power sharing is the issue, verify that your car is not limiting the speed due to battery temperature, state of charge above 80%, or its own maximum DC charging rate.