Volkswagen ID.3 Charging at Iberdrola

Volkswagen ID.3 Charger Will Not Start a Session

You plugged in your ID.3 and the charger just sits there. No power, no animation on the infotainment screen, nothing happening. Whether you are at a public DC fast charger or an AC destination charger, there are a few specific things to check before giving up on this station.

Symptoms

• CCS2 connector is plugged into the right rear charge port but the charger shows 'Waiting'
• Infotainment screen shows no charging activity after connecting the cable
• Charger display says 'Authorization required' even though you tapped your card
• Charge port LED on the right rear does not change color after plugging in
• We Charge or Elli app shows the car as connected but not charging

What to Do

1. 1

   Unplug and reseat the CCS2 connector

   Remove the connector from the right rear charge port completely. Wait five seconds. Reinsert it firmly until you hear the latch click. Make sure the two DC pins at the bottom of the CCS2 plug are aligned and fully engaged.

2. 2

   Authorize the session manually

   Check the charger display. If it says 'Waiting for authorization' or similar, tap your RFID card on the reader, open the charger operator's app, or use contactless payment. Do not assume Plug & Charge will work unless you have confirmed it is active.

3. 3

   Check for scheduled charging in the infotainment

   On the ID.3's infotainment screen, go to the charging settings. Look for departure timer or scheduled charging. If it is active, disable it or select 'Charge Now' to start immediately.

4. 4

   Verify Plug & Charge setup in the We Charge app

   Open the We Charge or Elli app on your phone. Check that Plug & Charge is enabled and your payment method is valid. If Plug & Charge has never been set up, you will need to authorize sessions manually at every charger.

5. 5

   Restart the infotainment system

   Press and hold the power button on the infotainment screen for about 10 seconds until it goes black. Wait for it to restart. This can resolve communication glitches between the ID. Software and the charger without affecting the car's other systems.

6. 6

   Try a different charger or connector

   If the session still will not start, the charger may be faulted. Try a different connector at the same station, or find a nearby alternative using the We Charge app or the ID.3's built-in charger finder.

Volkswagen ID.3 Payment Failed at Charging Station

You are at the charger, your ID.3 is plugged in, but the payment will not go through. The charger shows an error or just sits there waiting for authorization. Payment problems at public chargers are common, and they usually have nothing to do with your car. Here is how to get charging.

Symptoms

• Charger displays 'Payment failed' or 'Authorization error' after tapping your card
• RFID card is not recognized by the charger reader
• We Charge or Elli app shows an error when trying to start a remote session
• Plug & Charge does not activate after plugging in the CCS2 connector
• Contactless payment terminal on the charger rejects your bank card

What to Do

1. 1

   Try a different payment method

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two different payment options covers most situations.

2. 2

   Check the We Charge or Elli app

   Open the We Charge or Elli app on your phone. Make sure your account is active, your payment method is valid, and there are no outstanding charges. Try starting the session remotely through the app.

3. 3

   Scan the charger QR code

   Most public chargers have a QR code on the unit. Scan it with your phone camera. This opens the operator's payment page in your browser, where you can usually pay with a credit card without downloading their specific app.

4. 4

   Check your bank app for blocked transactions

   Open your banking app and look for flagged or declined transactions. If you see a notification about a blocked payment, approve it and try the charger again.

5. 5

   Try Plug & Charge if available

   If the charger supports Plug & Charge and your ID.3 has it activated through We Charge, unplug and replug the CCS2 connector into the right rear charge port. Payment should authorize automatically through the cable.

6. 6

   Move to a different charger

   If nothing works, the charger's payment system may be completely down. Find a nearby alternative using the We Charge app or the ID.3's built-in charger finder on the infotainment screen.

Volkswagen ID.3 Charging Slower Than Expected

You plugged in your ID.3 expecting 130 kW and the infotainment screen shows 40 kW. Or your wallbox at home is stuck at 3 kW instead of 11 kW. The ID.3 Pro has a smaller 59 kWh battery than its siblings, which means the charging curve tapers sooner. But most slow charging has a fixable cause.

Symptoms

• DC fast charging power well below the 130 kW maximum shown on the infotainment display
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 55-60% during DC fast charging
• Infotainment display shows a long estimated time to reach your target percentage
• Different CCS2 chargers consistently deliver less power than expected

What to Do

1. 1

   Check if preconditioning was active

   On the infotainment screen, look for battery temperature indicators when charging. If the battery was cold, enable preconditioning in the We Charge or Elli app before your next fast charging stop. You can also set a departure time, which warms the battery before you leave.

2. 2

   Check your current state of charge

   If you are above 60%, the reduced speed is expected on the 59 kWh pack. For the fastest DC charging, arrive at the charger between 10-20%. The ID.3 Pro peaks early and tapers sooner than larger-battery VW models.

3. 3

   Verify the charger is not sharing power

   Check if another car is plugged into the same charging station. Some stations split available power between users. If possible, move to a charger unit where no other car is connected.

4. 4

   Check the AC charge current setting

   On the infotainment screen, navigate to the charging settings. Look for the AC charge current or amperage limit. Make sure it is set to the maximum. This only affects AC charging at home or destination chargers.

5. 5

   Try a different charger

   If speeds remain low, the charger may be delivering less than its rated power. Try a different station. Use the We Charge app or the ID.3's built-in charger finder to locate alternatives nearby.

6. 6

   Check for a software update

   Go to the settings menu on the infotainment screen and check for available ID. Software updates. VW has improved charging curves through software updates on MEB platform vehicles. Install any pending updates.

App defaults to Spanish

The Iberdrola app opens in Spanish regardless of your phone's language setting. Finding the language switch can be confusing if you do not read Spanish.

Symptoms

• All app text is in Spanish after installation
• Language setting is not obvious in the menus
• Error messages and charger instructions appear only in Spanish
• Switching your phone's language does not change the app

How to Fix It

1. 1

   Open the app settings and look for 'Idioma'

   'Idioma' means 'Language' in Spanish. It is usually under the profile or settings menu (gear icon). Tap it and select English or your preferred language.

2. 2

   Check the profile or account section

   Some versions of the Iberdrola app place the language selector inside the user profile rather than in general settings. Look for your name or account icon at the top of the screen.

3. 3

   Update the app to the latest version

   Iberdrola has been improving multi-language support. Older versions may not have your language available. Update from the App Store or Google Play.

4. 4

   Use a roaming app as a backup

   If the language barrier is too frustrating, roaming apps like Chargemap, Shell Recharge, or Electropass work at many Iberdrola stations and offer broader language support.

Contactless payment session timeout

After tapping your card on an Iberdrola charger, there is a short window to plug in the cable and start charging. If you take too long, the session times out and you need to tap again.

Symptoms

• You tapped your card but by the time you connected the cable, nothing happened
• Charger screen shows 'Session expired' or returns to the start screen
• You were charged a pre-authorization but no energy was delivered
• The charger seemed ready but then went back to idle

How to Fix It

1. 1

   Plug in the cable first, then tap your card

   At Iberdrola stations, connect the cable to your vehicle before tapping your contactless card. This gives the charger the best chance to start immediately after authentication.

2. 2

   Tap your card again and act quickly

   After the tap, you typically have 60 to 90 seconds to complete the connection. If you missed the window, tap again. The pre-authorization from the first attempt will be released.

3. 3

   Use the Iberdrola app instead

   The app does not have the same time pressure. You can connect the cable, open the app, select the charger, and start at your own pace.

4. 4

   Check your bank statement for ghost charges

   Failed contactless attempts may show a pre-authorization hold. These are not actual charges and typically release within 3 to 7 business days. Contact your bank if they persist.

Confusing signage at gas station locations

Some Iberdrola chargers are located at gas stations (Repsol, Cepsa, or others). The EV charging area may not be clearly separated from the fuel pumps, and signage can be confusing.

Symptoms

• You cannot find the EV chargers at the gas station
• GPS directs you to the fuel pumps instead of the charging area
• Signage points to 'carga' or 'recarga' but the direction is unclear
• The charging spots are behind the gas station building or in an overflow lot

How to Fix It

1. 1

   Look for the charging area separate from the fuel pumps

   EV chargers at gas stations are almost always in a dedicated area away from the fuel pumps. Look for tall charger cabinets (about 2 meters high) rather than fuel dispensers.

2. 2

   Drive past the fuel pump area

   The charging area is often behind the main building, in a side lot, or at the far end of the property. Drive through the station slowly and look for the Iberdrola or charging network signage.

3. 3

   Ask the gas station attendant

   If the station has staff, ask where the electric charging points are. In Spanish, 'Donde estan los cargadores electricos?' gets the point across.

4. 4

   Check the Iberdrola app for station photos

   The station detail page in the Iberdrola app sometimes includes photos or access instructions that help you find the chargers within a larger gas station complex.

Mix of slow and fast chargers at the same station

Some Iberdrola stations have both AC chargers (7 to 22 kW) and DC fast chargers (50 to 350 kW) next to each other. It is easy to plug into a slow charger by mistake if you are not paying attention.

Symptoms

• You expected fast charging but your dashboard shows only 7 or 22 kW
• The charger you plugged into looks smaller than the others at the station
• You used a Type 2 cable instead of a CCS2 connector
• The charging session is going to take hours instead of minutes

How to Fix It

1. 1

   Check the charger label for power output

   Iberdrola chargers display their rated power (e.g., 50 kW, 150 kW, 350 kW) on the unit. Look for this label before plugging in. AC chargers (7 to 22 kW) are typically smaller and have Type 2 sockets.

2. 2

   Use the CCS2 connector for fast charging

   The CCS2 connector is the large combined plug for DC fast charging. If you used the smaller Type 2 plug (round with pins), you are on AC and will charge slowly.

3. 3

   Check the Iberdrola app for charger details

   The app shows each charger unit's power level at a station. Before plugging in, confirm which unit is the high-power DC charger.

4. 4

   Unplug and move to the fast charger

   If you accidentally started an AC session, stop the session in the app, unplug, and move to the DC fast charger. You will not be charged a penalty for a short session.

Power delivery varies by time of day

Some Iberdrola stations deliver noticeably less power during peak grid hours (typically early evening). This is due to grid constraints, not a charger fault.

Symptoms

• Charging speed is significantly lower in the evening than the same station delivered in the morning
• Speed starts high but drops during peak hours even at low battery levels
• Other vehicles at the station also show reduced speeds at the same time
• The charger does not reach its rated power despite your vehicle supporting it

How to Fix It

1. 1

   Check your battery level first

   The most common reason for reduced charging speed is a battery above 60 to 80% state of charge. Your vehicle limits the charging rate at higher battery levels regardless of the charger's capability.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge during late evening (after 10 PM) or early morning. Grid demand is lower and the station can deliver its full rated power.

3. 3

   Check for power sharing between chargers

   If multiple chargers are in use at the same station, they may share a grid connection. Charging when fewer vehicles are plugged in can improve your speed.

4. 4

   Try a different station nearby

   Not all Iberdrola stations have the same grid connection. A station a few kilometers away may have a better power supply and deliver higher speeds during peak hours.

5. 5

   Accept the reduced speed if you are above 60%

   If your battery is above 60%, the speed reduction is mostly from your vehicle's battery management, not the grid. This is normal and protects your battery's long-term health.