Tesla Model S Charging at ChargePoint

Tesla Model S Charger Will Not Start a Session

You plugged in your Model S and nothing is happening. No green light on the charge port, no animation on the 17-inch touchscreen, just silence. Whether you are at a Supercharger, a third-party CCS2 station, or a home wallbox, there are a handful of common reasons the session will not begin.

Symptoms

• Charge port LED stays white or flashes red after plugging in the connector
• 17-inch touchscreen shows no charging animation or displays an error message
• Supercharger stall makes a click but does not begin delivering power
• CCS2 connector at a third-party station locks in but charging never starts
• Tesla app shows 'Not Charging' even though the cable is connected

What to Do

1. 1

   Check the charge port LED color

   Walk to the left rear of the car and look at the charge port light. White means ready but not connected. Blue means communicating. Green means charging. Red or amber means there is a fault. If it is white with the cable plugged in, remove and reseat the connector firmly.

2. 2

   Unplug and replug the connector

   Remove the connector completely, wait five seconds, then reinsert it until you hear the latch click. On CCS2 connectors, make sure both the top (AC pins) and bottom (DC pins) sections are seated properly.

3. 3

   Check for scheduled charging on the touchscreen

   On the 17-inch touchscreen, go to Controls, then Charging. If scheduled charging is active, you will see the planned start time. Tap to disable it or select 'Charge Now' to override the schedule.

4. 4

   Authorize the session at non-Tesla chargers

   At third-party CCS2 stations, check whether the charger requires you to start the session through an app, RFID card, or contactless payment. Plug & Charge works at supported stations, but many still require manual authorization.

5. 5

   Try a different stall or charger

   If you are at a Supercharger, move to a different stall. If you are at a third-party station, try the other connector. A faulted charger looks identical to a working one from the outside.

6. 6

   Restart the touchscreen

   Hold both scroll wheels on the steering wheel for about 10 seconds until the 17-inch touchscreen goes black and reboots. This resets the charging controller and fixes some communication glitches. The car stays on during the reboot.

Tesla Model S Payment Failed at Charging Station

You are plugged in and the charger is waiting for payment, or the Supercharger session will not start because of a billing issue. Payment problems are one of the most common reasons drivers get stuck at chargers, and the Model S has multiple ways to pay depending on where you are charging.

Symptoms

• Supercharger session will not start and the Tesla app shows a payment error
• Third-party CCS2 charger displays 'Authorization failed' after tapping your card
• RFID card is not recognized by the charger's reader
• Plug & Charge does not activate at a supported station
• Contactless bank card is rejected by the charger's payment terminal

What to Do

1. 1

   Check your Tesla account payment method

   Open the Tesla app on your phone. Go to Account, then Payment. Verify your credit card is current and has not expired. If the card was replaced, update the details. Supercharger sessions will not start without a valid payment method on file.

2. 2

   Try a different payment method at the charger

   If your RFID card failed, try contactless with your bank card or phone. If contactless failed, try the charger operator's app. Having at least two payment methods gives you a backup when one does not work.

3. 3

   Scan the charger QR code for browser payment

   Most public chargers have a QR code on the unit. Scanning it with your phone opens the operator's payment page in your browser. You can usually pay with a credit card directly without downloading their app.

4. 4

   Check your banking app for blocked transactions

   Open your banking app and look for flagged or declined transactions. Some banks require you to approve the charge manually. Approve it and retry the payment at the charger.

5. 5

   Try Plug & Charge by replugging

   If the charger supports Plug & Charge, unplug the CCS2 connector from your Model S, wait a few seconds, and replug. Payment should authorize automatically through the cable. This only works if your Tesla account has Plug & Charge enabled and the charger supports ISO 15118.

6. 6

   Move to a Supercharger or a different station

   If you cannot resolve the payment issue, find a Tesla Supercharger using the nav on the 17-inch touchscreen. Supercharger billing is handled entirely through your Tesla account, bypassing third-party payment systems.

Tesla Model S Charging Slower Than Expected at Charger

You pulled into a Supercharger expecting 250 kW and the 17-inch touchscreen shows 80 kW. Or your home wallbox is crawling at 3 kW instead of 11 kW. The Model S has one of the fastest charging curves on the road, but reaching peak speed depends on battery temperature, state of charge, and a few settings you can check in under a minute.

Symptoms

• DC fast charging power well below 250 kW on the touchscreen despite a rated charger
• AC home charging stuck at 3-4 kW instead of the expected 11 kW on 3-phase
• Charging speed drops sharply after 40-50% on the touchscreen during DC fast charging
• Supercharger shows significantly lower kW than neighboring stalls
• Non-Tesla CCS2 charger delivers far less power than its rated maximum

What to Do

1. 1

   Check if the battery was preconditioned

   On the 17-inch touchscreen, tap the charging icon. If you see a snowflake icon or a message about conditioning, the battery was not warm enough when you arrived. Next time, navigate to the charger using Tesla nav at least 20-30 minutes before arrival so preconditioning kicks in automatically.

2. 2

   Check your current state of charge

   If you are above 50%, the slower speed is expected on the 95 kWh NCA pack. Peak power happens roughly between 5-30%. For the fastest charging stops on a road trip, arrive between 10-20%.

3. 3

   Move to an unpaired Supercharger stall

   Look at the stall numbers. If they are labeled in A/B pairs (3A/3B, 4A/4B), pick a stall where the paired stall is empty. At V3 or V4 Superchargers with the Magic Dock or the new V4 cable, this is not a concern.

4. 4

   Check the AC charge current limit on the touchscreen

   Go to Controls, then Charging on the touchscreen. Look for the charge current setting. Make sure it is set to the maximum amperage. This only affects AC charging at home or destination chargers, not Supercharging.

5. 5

   Try a different charger or stall

   If speeds remain low, the charger hardware may be degraded. Try another stall at the same location. On non-Tesla CCS2 stations, check the charger display for error codes or reduced power notices.

6. 6

   Check for a Tesla software update

   Go to Controls, then Software on the touchscreen. If an update is pending, install it. Tesla has adjusted charging curves through over-the-air updates in the past, sometimes improving peak speeds.

App shows "Available" but the charger is physically broken

The ChargePoint app shows a green status for a charger, but when you arrive, the unit is visibly damaged, has a blank screen, or displays an out-of-service message. This happens because ChargePoint's availability status depends on the charger reporting its own state, and a broken charger sometimes cannot report that it is broken.

Symptoms

• App shows the charger as available with a green icon
• Charger screen is blank, cracked, or showing an error message on site
• The connector is physically damaged or the cable is severed
• Other drivers at the station confirm the charger has been broken for days

How to Fix It

1. 1

   Check the other chargers at the same station

   ChargePoint stations often have multiple units. If one is broken, another unit nearby may work fine. Use the app to see all connectors at the location.

2. 2

   Report the broken charger in the ChargePoint app

   Open the station detail in the ChargePoint app, find the specific charger, and report the issue. Select the most accurate problem description. This updates the status for other drivers and alerts the station operator.

3. 3

   Check recent driver reports in the app

   The ChargePoint app sometimes shows recent check-ins or reports from other drivers. Before driving to a station, scroll down on the station detail page to see if anyone has reported issues recently.

4. 4

   Find the nearest alternative station

   In the ChargePoint app, tap "Find nearby" or zoom out on the map. Filter for DC fast chargers if you need speed. You can also check Google Maps or A Better Route Planner for non-ChargePoint alternatives.

RFID tap not registering

You tap your ChargePoint card on the reader and nothing happens. No beep, no screen change, no session. The RFID readers on ChargePoint stations can be finicky, especially on older European units.

Symptoms

• Tapping the RFID card produces no response from the charger
• The charger beeps but then shows "Authentication failed"
• The card works at some ChargePoint stations but not this one
• The RFID reader area is hard to locate on the charger

How to Fix It

1. 1

   Find the correct RFID reader location

   On ChargePoint stations, the RFID reader is sometimes in an unexpected spot. Look for a small RFID symbol, usually on the front face of the charger or near the screen. On some European units, it is on the side panel.

2. 2

   Hold the card flat and steady for three seconds

   Do not tap and pull away quickly. Press the card flat against the reader area and hold it still for a full three seconds. Some readers need this extra time.

3. 3

   Remove your card from any wallet or phone case

   If your ChargePoint card is in a wallet with other RFID cards or near your phone, interference can prevent the reader from detecting it. Hold the card alone against the reader.

4. 4

   Start the session from the ChargePoint app instead

   Open the ChargePoint app, find the station, select the specific charger, and tap "Start." This sends a start command over the network and does not rely on the physical RFID reader at all.

5. 5

   Check if your card is activated

   New ChargePoint RFID cards need to be activated in the ChargePoint app or on the website. Go to Account, then Cards, and verify your card is listed and active.

Session auto-terminates at 80%

Your charging session stops automatically when your battery reaches around 80%, even though you did not set a limit and wanted to charge further. Some ChargePoint stations, particularly those operated by local CPOs, have a configuration that ends sessions at 80% to free up the charger for the next driver.

Symptoms

• Charging stops at exactly 80% state of charge
• The ChargePoint app shows the session as "Complete" at 80%
• No error message on the charger, it simply stops
• Your car is still ready to accept more charge

How to Fix It

1. 1

   Check if this is a station policy

   Some station operators set an 80% cutoff on DC fast chargers to maximize charger availability. This is not a fault. Check the station detail in the ChargePoint app or look for signage at the station explaining time or charge limits.

2. 2

   Start a new session

   After the session ends at 80%, you can often start a new session on the same charger to continue charging. Unplug, wait 10 seconds, plug back in, and authenticate again.

3. 3

   Check your car's own charge limit

   Some EVs have a default charge limit set to 80% in the car's settings. Check your car's infotainment system under charging settings. If the limit is set to 80%, the car itself is stopping the session, not ChargePoint.

4. 4

   Switch to a different station if you need to charge above 80%

   If the 80% cutoff is a station policy and you need more charge, find a station without this restriction. AC chargers at destinations are usually a better choice for topping up above 80% because DC charging is very slow above that level anyway.

Waitlist feature not working

ChargePoint offers a waitlist feature that is supposed to notify you when a busy charger becomes available. In practice, the notifications are unreliable, especially at European stations.

Symptoms

• You joined the waitlist but never received a notification
• The notification arrived long after the charger became available
• The waitlist button is not available for some stations
• You received a notification but the charger was already taken by someone else

How to Fix It

1. 1

   Enable push notifications for the ChargePoint app

   Go to your phone's notification settings and make sure ChargePoint notifications are allowed. On iOS, check Settings, then Notifications, then ChargePoint. On Android, check App Info, then Notifications.

2. 2

   Stay within a reasonable distance of the station

   The waitlist is most useful when you are nearby, at a shop or restaurant within a few minutes of the charger. By the time you drive 15 minutes back to a station, the charger may already be taken again.

3. 3

   Do not rely solely on the waitlist

   Treat the waitlist as a nice-to-have, not a guarantee. Check the app manually every few minutes for availability updates, or look for an alternative station while you wait.

4. 4

   Check if the station supports the waitlist feature

   Not all ChargePoint stations have the waitlist enabled, particularly CPO-operated stations using ChargePoint hardware. If you do not see a waitlist option on the station page, the feature is not available there.

App interface confusing for European users

ChargePoint's app was designed primarily for the US market. European users sometimes encounter US-centric defaults, unfamiliar terminology, or features that do not apply in Europe.

Symptoms

• App defaults to miles instead of kilometers
• Pricing displayed in unexpected formats or currencies
• Filter options include connector types not used in Europe, like NACS
• Station details reference US-specific payment methods or loyalty programs
• Map loads centered on the US instead of your actual location

How to Fix It

1. 1

   Set your region and units in the app settings

   Open the ChargePoint app, go to Account or Settings, and look for region, language, or unit preferences. Set distance to kilometers and currency to your local currency.

2. 2

   Filter for CCS2 connectors

   When searching for stations, use the filter to show only CCS2 (the European DC fast charging standard). This hides US-only connector types from your results.

3. 3

   Check the station detail for European pricing

   Tap on a station to see the pricing breakdown. European ChargePoint stations typically show pricing in EUR, SEK, NOK, or GBP per kWh, sometimes with an additional per-minute fee after a certain duration.

4. 4

   Ignore US-specific features

   Features like ChargePoint Home integration or certain fleet management tools are designed for the US market. If something in the app does not seem relevant, it probably is not meant for European users.

CPO-operated station behaves differently than expected

Some stations use ChargePoint hardware and appear in the ChargePoint app, but they are owned and operated by a local charge point operator. These stations may have different pricing, access rules, or session limits than ChargePoint-owned stations.

Symptoms

• Pricing at the station does not match what you expected from ChargePoint
• Your ChargePoint account works but the session has unexpected restrictions
• The charger looks like ChargePoint but has another company's branding on it
• Customer support refers you to a different company for this station

How to Fix It

1. 1

   Check who operates the station

   In the ChargePoint app, the station detail page usually shows the operator or network name. If it says something other than ChargePoint, the station is CPO-operated and may have its own rules.

2. 2

   Read the pricing and terms on the station detail page

   CPO-operated stations set their own pricing. Check the ChargePoint app for the exact per-kWh rate and any time-based fees or session limits before you plug in.

3. 3

   Try the CPO's own app if ChargePoint authentication fails

   Some CPO stations accept ChargePoint cards but work more reliably with the operator's own app or RFID card. Look for the operator's name on the charger and download their app.

4. 4

   Contact the station operator for site-specific issues

   For problems like broken hardware, pricing errors, or access restrictions at a CPO-operated station, contact the operator directly. Their contact information is usually on the charger or in the station detail in the ChargePoint app.