Smart #1 Charging at Tesla Supercharger

Smart #1 Pro Plus Charger Will Not Start a Session

You plugged the connector into your Smart #1, but the charger is not responding. No charging indicator, no session starting, nothing happening. This is almost always a charger-side or authentication issue, not a problem with the car. Let us work through it.

Symptoms

• The CCS2 or Type 2 connector is in but nothing happens
• The charger screen shows an error or stays on the welcome screen
• The Smart #1 dashboard does not show a charging session
• You hear the connector lock but charging does not begin
• The charging app shows the charger as available even though you are plugged in

What to Do

1. 1

   Authenticate with the charger first

   Tap your RFID card, open the charging network app, or use contactless payment on the charger. Wait for the charger screen to confirm the session before plugging in.

2. 2

   Remove and reinsert the connector

   Unlock the connector (press the button on the charger handle), remove it fully, wait 10 seconds, then push it back in firmly until it clicks and locks.

3. 3

   Lock and unlock the car

   Use the key fob or Smart app to lock the car, wait 15 seconds, then unlock it. This can reset the charging system if it is in a fault state.

4. 4

   Check the charge port for ice or debris

   Open the charge port flap on the rear left of the Smart #1 and inspect it. In winter, warm the port gently with your hands or use lukewarm water if ice is present. Never use hot water.

5. 5

   Restart the infotainment system

   Press and hold the power button on the center screen for 10 seconds to restart the system. Wait for it to boot fully, then try plugging in again.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Move to another charger at the station or a different location.

Smart #1 Pro Plus Payment Failed at Charging Station

You are ready to charge your Smart #1, but the payment will not go through. The RFID card does not register, the app gives an error, or your bank card gets declined. This is a charger and payment issue, not a car issue. Here is what to do.

Symptoms

• RFID card tap does nothing at the charger
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• Charger displays a payment error code
• Session starts but stops immediately with a billing message

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the stickers and screen on the charger for accepted networks, apps, and card types. If your payment method is not listed, you need to try something else.

2. 2

   Switch to a different payment method

   Try a different RFID card, a different charging app, or a contactless bank card. Having multiple options is essential for public charging in Europe.

3. 3

   Check your available balance

   Open your banking app and verify you have at least 80 EUR available to cover the pre-authorization hold. If not, use a card with a higher balance.

4. 4

   Hold the RFID card steadily

   Place the RFID card flat against the reader and hold it for 2-3 seconds. Do not tap and remove quickly. Some readers are slow to respond.

5. 5

   Cancel and retry the session

   If a previous attempt is stuck, cancel it through the app first. Wait a minute, then start a fresh session from scratch.

6. 6

   Try the other charger unit

   If the payment hardware is faulty on one unit, the neighboring charger at the same station may work fine.

Smart #1 Pro Plus Charging Slower Than Expected Speed

Your Smart #1 should charge at up to 150 kW on DC and 22 kW on AC, but the numbers on the screen tell a different story. Maybe you are stuck at 40 kW on a fast charger, or your wallbox is only delivering 7 kW. Here is what is going on and how to fix it.

Symptoms

• DC fast charging well below the 150 kW maximum
• AC charging stuck at 7 or 11 kW instead of 22 kW
• Charging speed drops sharply after 50-60% state of charge
• The dashboard shows lower power than the charger rating
• Charging from 10% to 80% takes much longer than the advertised 30 minutes

What to Do

1. 1

   Use navigation to activate preconditioning

   Set the DC charger as your destination in the Smart #1's built-in navigation. This activates battery preconditioning, warming or cooling the battery to the ideal temperature before you arrive.

2. 2

   Check your state of charge

   If you are above 60%, the slower speed is expected. For the fastest DC charging, arrive between 10-20% and charge to 80%.

3. 3

   Verify the charger's actual output

   Check the charger display for its rated power. If it says 50 kW, that is your maximum regardless of the Smart #1's 150 kW capability. Look for chargers rated 150 kW or higher.

4. 4

   Check if the charger is shared

   If another car is using the adjacent connector on the same charger unit, you may be sharing power. Move to a charger with no other user if possible.

5. 5

   For AC, verify three-phase connection

   To get 22 kW AC, your wallbox must be wired for three-phase at 32A. Check with your electrician. If you only have single-phase, the maximum is about 7.4 kW.

6. 6

   Try a different charger

   If speeds are still low after checking everything, the charger may be degraded. Try another charger at the same station or a different location.

Non-Tesla vehicle cannot find the station in the Tesla app

You arrive at a Supercharger with your non-Tesla EV but the station does not appear in the Tesla app, or it shows as Tesla-only.

Symptoms

• Tesla app shows the station but does not list it as open to other brands
• Station appears on the map but the 'Start Charging' button is grayed out
• App says 'This location is not available for your vehicle'
• You can see other non-Tesla vehicles charging but the app will not let you start

How to Fix It

1. 1

   Confirm the station is open to non-Tesla vehicles

   Not all Supercharger locations are open to other brands. In the Tesla app, look for stations marked with a label indicating non-Tesla access. If there is no such label, the station is Tesla-only.

2. 2

   Update the Tesla app

   Tesla frequently adds new non-Tesla locations. If your app is outdated, recently opened stations may not appear as accessible. Update to the latest version.

3. 3

   Check your Tesla account setup

   You need a Tesla account with a valid payment method added, even if you do not own a Tesla. Open the app, go to your account settings, and confirm a credit or debit card is saved.

4. 4

   Try selecting the specific stall number

   After plugging in, open the Tesla app, select the station, and tap the stall number that matches the one you plugged into. The stall number is printed on the charger post.

5. 5

   Restart the Tesla app

   Force-close and reopen the app. Location and station data sometimes fails to load correctly on the first attempt.

Payment hold is larger than expected

Tesla places a pre-authorization hold on your payment method when you start a Supercharger session. This hold can be surprisingly large and may temporarily reduce your available balance.

Symptoms

• Bank notification shows a hold of 50 to 120 EUR before charging begins
• Available balance on your debit card drops significantly
• Multiple holds appear from previous sessions that have not been released yet
• Hold amount does not match the actual charging cost

How to Fix It

1. 1

   Understand that holds are temporary

   Tesla pre-authorizes a fixed amount to ensure payment. The actual charge replaces the hold once the session is complete. The hold typically releases within 1 to 5 business days depending on your bank.

2. 2

   Use a credit card instead of a debit card

   Credit cards handle pre-authorization holds without affecting your available cash balance. Debit cards temporarily lock the held amount from your account.

3. 3

   Check the Tesla app for final session cost

   After charging, the Tesla app shows the actual amount you will be billed. This is always less than or equal to the pre-authorization hold.

4. 4

   Contact your bank if holds persist beyond 7 days

   If a hold has not been released after a week, contact your bank and provide the transaction reference from the Tesla app. Banks can manually release stale holds.

Session ends early or stops unexpectedly

Charging stops before reaching your target battery level. The car disconnects or the Supercharger stops delivering power mid-session.

Symptoms

• Charging stops at 80% even though you set a higher limit
• Session ends after a few minutes with no error message
• Car shows 'Charging interrupted' or 'Check charge cable'
• Supercharger light turns from green to red or flashing

How to Fix It

1. 1

   Check your charge limit setting

   Tesla vehicles default to an 80% charge limit. Non-Tesla vehicles have their own limit settings in the infotainment system. Verify you have set the limit above where charging stopped.

2. 2

   Reseat the cable connector

   Unplug the cable, inspect the connector and your vehicle's charge port for debris, and plug it back in firmly. A loose connection can cause the session to drop.

3. 3

   Try a different stall

   Individual Supercharger stalls can have intermittent faults. Move to another stall, preferably one that is not paired with an active session (stalls sharing a power cabinet are usually labeled with paired numbers like 1A/1B).

4. 4

   Check for idle fees

   If you reached your charge limit and did not unplug promptly, Tesla may have ended the session and started idle fees. Check the Tesla app for notifications.

5. 5

   Restart your vehicle

   For non-Tesla vehicles, turn the car off completely, wait 30 seconds, and turn it back on. Then plug in again. Some vehicles need a restart to clear communication errors with the Supercharger.

Reduced charging speed due to power sharing

Your charging speed is significantly lower than the station's advertised maximum. This often happens because Supercharger stalls share power with a paired stall.

Symptoms

• Charging at 60 to 80 kW at a station rated for 250 kW
• Speed dropped when another vehicle plugged in at a nearby stall
• Speed is much lower than you got at the same station previously
• One stall charges fast while the paired stall is very slow

How to Fix It

1. 1

   Move to an unpaired stall

   Tesla Supercharger stalls are paired (for example, 1A and 1B share a power cabinet). If someone is using 1A, stall 1B will be slower. Choose a stall where neither paired unit is occupied.

2. 2

   Look at the stall labels

   Paired stalls usually share a number with A/B suffixes, or are directly adjacent. At V3 Superchargers (250 kW), power sharing is less of an issue than at older V2 stations (150 kW).

3. 3

   Check your battery temperature

   Tesla vehicles precondition the battery automatically when navigating to a Supercharger. If you did not use Tesla navigation (or you drive a non-Tesla), the battery may be cold and limiting charge speed on its own.

4. 4

   Arrive with a lower state of charge

   Charging speed decreases as the battery fills. For the fastest stop, arrive between 5 and 20% if you can do so safely. The difference in charge speed between arriving at 10% versus 40% is significant.

Non-Tesla vehicle CCS2 connector issues

At Supercharger stations open to non-Tesla vehicles, the CCS2 connector may not work correctly with your car. In Europe, open Supercharger stations have native CCS2 cables, so no adapter is needed.

Symptoms

• The CCS2 connector does not lock into your vehicle's charge port
• Session starts but drops after a few seconds
• Tesla app does not recognize your vehicle after plugging in
• The connector fits but no power is delivered

How to Fix It

1. 1

   Make sure you are using the CCS2 cable, not the Tesla connector

   Open Supercharger stations in Europe have separate CCS2 cables alongside Tesla connectors, or dedicated CCS2 posts. Use the CCS2 cable for non-Tesla vehicles.

2. 2

   Push the connector in firmly until it clicks

   CCS2 connectors need a firm push to fully seat and lock. If the connector is loose, the charger cannot communicate with your vehicle.

3. 3

   Start the session through the Tesla app

   Select the correct stall number in the Tesla app and start the session. The stall number is printed on the charger post. It must match exactly.

4. 4

   Try a different stall

   Individual stalls can have faulty connectors. Move to another stall, preferably one that is not paired with an active session.

5. 5

   Check vehicle compatibility

   Not all non-Tesla vehicles work perfectly at every Supercharger station. If your vehicle repeatedly fails to connect, check Tesla's website or app for your vehicle's compatibility status.