Smart #1 Charging at Powerdot

Smart #1 Pro Plus Charger Will Not Start a Session

You plugged the connector into your Smart #1, but the charger is not responding. No charging indicator, no session starting, nothing happening. This is almost always a charger-side or authentication issue, not a problem with the car. Let us work through it.

Symptoms

• The CCS2 or Type 2 connector is in but nothing happens
• The charger screen shows an error or stays on the welcome screen
• The Smart #1 dashboard does not show a charging session
• You hear the connector lock but charging does not begin
• The charging app shows the charger as available even though you are plugged in

What to Do

1. 1

   Authenticate with the charger first

   Tap your RFID card, open the charging network app, or use contactless payment on the charger. Wait for the charger screen to confirm the session before plugging in.

2. 2

   Remove and reinsert the connector

   Unlock the connector (press the button on the charger handle), remove it fully, wait 10 seconds, then push it back in firmly until it clicks and locks.

3. 3

   Lock and unlock the car

   Use the key fob or Smart app to lock the car, wait 15 seconds, then unlock it. This can reset the charging system if it is in a fault state.

4. 4

   Check the charge port for ice or debris

   Open the charge port flap on the rear left of the Smart #1 and inspect it. In winter, warm the port gently with your hands or use lukewarm water if ice is present. Never use hot water.

5. 5

   Restart the infotainment system

   Press and hold the power button on the center screen for 10 seconds to restart the system. Wait for it to boot fully, then try plugging in again.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Move to another charger at the station or a different location.

Smart #1 Pro Plus Payment Failed at Charging Station

You are ready to charge your Smart #1, but the payment will not go through. The RFID card does not register, the app gives an error, or your bank card gets declined. This is a charger and payment issue, not a car issue. Here is what to do.

Symptoms

• RFID card tap does nothing at the charger
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• Charger displays a payment error code
• Session starts but stops immediately with a billing message

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the stickers and screen on the charger for accepted networks, apps, and card types. If your payment method is not listed, you need to try something else.

2. 2

   Switch to a different payment method

   Try a different RFID card, a different charging app, or a contactless bank card. Having multiple options is essential for public charging in Europe.

3. 3

   Check your available balance

   Open your banking app and verify you have at least 80 EUR available to cover the pre-authorization hold. If not, use a card with a higher balance.

4. 4

   Hold the RFID card steadily

   Place the RFID card flat against the reader and hold it for 2-3 seconds. Do not tap and remove quickly. Some readers are slow to respond.

5. 5

   Cancel and retry the session

   If a previous attempt is stuck, cancel it through the app first. Wait a minute, then start a fresh session from scratch.

6. 6

   Try the other charger unit

   If the payment hardware is faulty on one unit, the neighboring charger at the same station may work fine.

Smart #1 Pro Plus Charging Slower Than Expected Speed

Your Smart #1 should charge at up to 150 kW on DC and 22 kW on AC, but the numbers on the screen tell a different story. Maybe you are stuck at 40 kW on a fast charger, or your wallbox is only delivering 7 kW. Here is what is going on and how to fix it.

Symptoms

• DC fast charging well below the 150 kW maximum
• AC charging stuck at 7 or 11 kW instead of 22 kW
• Charging speed drops sharply after 50-60% state of charge
• The dashboard shows lower power than the charger rating
• Charging from 10% to 80% takes much longer than the advertised 30 minutes

What to Do

1. 1

   Use navigation to activate preconditioning

   Set the DC charger as your destination in the Smart #1's built-in navigation. This activates battery preconditioning, warming or cooling the battery to the ideal temperature before you arrive.

2. 2

   Check your state of charge

   If you are above 60%, the slower speed is expected. For the fastest DC charging, arrive between 10-20% and charge to 80%.

3. 3

   Verify the charger's actual output

   Check the charger display for its rated power. If it says 50 kW, that is your maximum regardless of the Smart #1's 150 kW capability. Look for chargers rated 150 kW or higher.

4. 4

   Check if the charger is shared

   If another car is using the adjacent connector on the same charger unit, you may be sharing power. Move to a charger with no other user if possible.

5. 5

   For AC, verify three-phase connection

   To get 22 kW AC, your wallbox must be wired for three-phase at 32A. Check with your electrician. If you only have single-phase, the maximum is about 7.4 kW.

6. 6

   Try a different charger

   If speeds are still low after checking everything, the charger may be degraded. Try another charger at the same station or a different location.

App only available in certain languages

The Powerdot app defaults to the language of the country where the station is located. If you are visiting from another country, the app may display in Portuguese, Spanish, or French with no obvious way to switch.

Symptoms

• App interface is in Portuguese or Spanish after downloading
• Menu options and error messages are in a language you do not understand
• Language settings are buried or not clearly labeled

How to Fix It

1. 1

   Change your phone's system language temporarily

   The Powerdot app often follows your phone's language setting. Switch your phone to English (or your preferred language), close the app completely, and reopen it.

2. 2

   Check the app settings for a language toggle

   Open the profile or settings section in the Powerdot app. Some versions include a language selector, but it may be labeled in the current language. Look for a globe icon or a dropdown near the top of the settings screen.

3. 3

   Update the app to the latest version

   Powerdot has been adding language support in recent updates. An older version may lack your language entirely. Check the App Store or Google Play for updates.

4. 4

   Use a roaming app instead

   If the language barrier is blocking you, try starting the session through a roaming provider like Shell Recharge, Chargemap, or Electropass. These apps support more languages and work at most Powerdot stations.

RFID card from Northern European provider not accepted

Your RFID card works fine at home but the Powerdot charger rejects it. Not all roaming agreements cover every Powerdot station, especially newer installations.

Symptoms

• RFID tap produces a red light or error beep
• Charger screen shows 'Card not recognized' or similar in local language
• The same RFID card works at other networks in the same country
• No error message at all, the charger simply does not respond to the tap

How to Fix It

1. 1

   Check your roaming provider's coverage map

   Open your RFID provider's app or website and verify that Powerdot stations are listed as supported. Some providers cover Powerdot in France but not in Portugal, or vice versa.

2. 2

   Try the Powerdot app as a fallback

   Download the Powerdot app and create an account. Add a payment method and start the session through the app. This bypasses the RFID reader entirely.

3. 3

   Hold the RFID card still for 3 to 5 seconds

   Some Powerdot readers are slower to process roaming cards. Hold your card flat against the reader and wait for a response instead of tapping quickly.

4. 4

   Try a different RFID card if you have one

   If you carry cards from multiple providers, try another one. Roaming coverage at Powerdot varies by provider and by country.

Charger screen displays only in local language

The charger's physical screen shows instructions, errors, and prompts in Portuguese, Spanish, or French. There is no language button on the screen itself.

Symptoms

• All on-screen text is in a language you do not read
• Error messages appear but you cannot understand what went wrong
• You are unsure which on-screen button to press to start or stop the session

How to Fix It

1. 1

   Use your phone's camera to translate the screen

   Open Google Translate or Apple Translate on your phone. Use the camera translation feature to point at the charger screen. This gives you a real-time translation of the displayed text.

2. 2

   Start the session from the app instead

   The Powerdot app (or a roaming app) lets you start and monitor the session from your phone, so you do not need to interact with the charger screen at all.

3. 3

   Look for universal icons

   Most Powerdot screens use standard icons: a plug symbol for 'connect cable,' a play triangle for 'start,' and a stop square for 'end session.' Follow the icons if you cannot read the text.

4. 4

   Remember the common flow

   The typical sequence is: plug in the cable, authenticate (app or RFID), confirm on screen (usually the green button or right-side option), and charging begins. The same flow applies regardless of the language shown.

Parking time limit at shopping center stations

Many Powerdot stations are located at shopping centers, retail parks, and supermarkets. These locations often enforce parking time limits that are shorter than a full charging session.

Symptoms

• Parking enforcement ticket on your windshield after charging
• Signs indicate a 1 or 2 hour maximum parking time
• Security asks you to move your car before charging is complete
• Charger is in a paid parking area with its own ticket machine

How to Fix It

1. 1

   Check parking signs before you plug in

   Look for parking time limit signs near the charging spots. Some shopping centers allow 2 hours, others only 1 hour. The charging time limit and the parking time limit are not always the same.

2. 2

   Set a timer on your phone

   Set an alarm for 10 minutes before the parking limit expires. This gives you time to unplug and move your car even if your battery is not fully charged.

3. 3

   Charge to a practical level, not to 100%

   At a 350 kW station, you can add significant range in 20 to 30 minutes. Plan to charge to 70 or 80% and leave within the parking window.

4. 4

   Ask at the shopping center information desk

   Some shopping centers have special arrangements for EV charging. The information desk may provide a parking extension or a specific pass for the charging area.

Session start delay on high-power units

Newer Powerdot high-power chargers (200 kW and above) sometimes take longer than expected to begin delivering power after authentication. The delay can last 30 seconds to 2 minutes.

Symptoms

• App shows 'Starting session' for over a minute
• Charger screen shows a loading animation after authentication
• Cable is locked but no power is flowing yet
• You hear the charger's fans or cooling system running but the dashboard shows 0 kW

How to Fix It

1. 1

   Wait up to 2 minutes before taking action

   High-power chargers perform a communication handshake with your vehicle before delivering power. This includes safety checks and power negotiation. A delay of up to 2 minutes can be normal, especially at newer stations.

2. 2

   Check your vehicle's charging screen

   Your car's dashboard or infotainment may show a 'Preparing to charge' or 'Negotiating' status. If the car is still communicating with the charger, the session is progressing even though power has not started.

3. 3

   Unplug and retry if nothing happens after 2 minutes

   If the charger has not started delivering power after 2 full minutes, unplug the cable, wait 15 seconds, and plug in again. Re-authenticate through the app or RFID.

4. 4

   Try a different connector on the same unit

   Some Powerdot chargers have two CCS2 cables. If one is stuck in the handshake phase, the other cable on the same unit may work.

5. 5

   Move to a different charger at the station

   If retrying on the same unit does not work, try another charger at the station. Report the faulty unit in the Powerdot app.