Smart #1 Charging at Electra

Smart #1 Pro Plus Charger Will Not Start a Session

You plugged the connector into your Smart #1, but the charger is not responding. No charging indicator, no session starting, nothing happening. This is almost always a charger-side or authentication issue, not a problem with the car. Let us work through it.

Symptoms

• The CCS2 or Type 2 connector is in but nothing happens
• The charger screen shows an error or stays on the welcome screen
• The Smart #1 dashboard does not show a charging session
• You hear the connector lock but charging does not begin
• The charging app shows the charger as available even though you are plugged in

What to Do

1. 1

   Authenticate with the charger first

   Tap your RFID card, open the charging network app, or use contactless payment on the charger. Wait for the charger screen to confirm the session before plugging in.

2. 2

   Remove and reinsert the connector

   Unlock the connector (press the button on the charger handle), remove it fully, wait 10 seconds, then push it back in firmly until it clicks and locks.

3. 3

   Lock and unlock the car

   Use the key fob or Smart app to lock the car, wait 15 seconds, then unlock it. This can reset the charging system if it is in a fault state.

4. 4

   Check the charge port for ice or debris

   Open the charge port flap on the rear left of the Smart #1 and inspect it. In winter, warm the port gently with your hands or use lukewarm water if ice is present. Never use hot water.

5. 5

   Restart the infotainment system

   Press and hold the power button on the center screen for 10 seconds to restart the system. Wait for it to boot fully, then try plugging in again.

6. 6

   Try a different charger

   If the session still will not start, the charger is likely faulty. Move to another charger at the station or a different location.

Smart #1 Pro Plus Payment Failed at Charging Station

You are ready to charge your Smart #1, but the payment will not go through. The RFID card does not register, the app gives an error, or your bank card gets declined. This is a charger and payment issue, not a car issue. Here is what to do.

Symptoms

• RFID card tap does nothing at the charger
• Charging app shows a payment or authorization error
• Contactless bank card is declined
• Charger displays a payment error code
• Session starts but stops immediately with a billing message

What to Do

1. 1

   Check which payment methods the charger accepts

   Look at the stickers and screen on the charger for accepted networks, apps, and card types. If your payment method is not listed, you need to try something else.

2. 2

   Switch to a different payment method

   Try a different RFID card, a different charging app, or a contactless bank card. Having multiple options is essential for public charging in Europe.

3. 3

   Check your available balance

   Open your banking app and verify you have at least 80 EUR available to cover the pre-authorization hold. If not, use a card with a higher balance.

4. 4

   Hold the RFID card steadily

   Place the RFID card flat against the reader and hold it for 2-3 seconds. Do not tap and remove quickly. Some readers are slow to respond.

5. 5

   Cancel and retry the session

   If a previous attempt is stuck, cancel it through the app first. Wait a minute, then start a fresh session from scratch.

6. 6

   Try the other charger unit

   If the payment hardware is faulty on one unit, the neighboring charger at the same station may work fine.

Smart #1 Pro Plus Charging Slower Than Expected Speed

Your Smart #1 should charge at up to 150 kW on DC and 22 kW on AC, but the numbers on the screen tell a different story. Maybe you are stuck at 40 kW on a fast charger, or your wallbox is only delivering 7 kW. Here is what is going on and how to fix it.

Symptoms

• DC fast charging well below the 150 kW maximum
• AC charging stuck at 7 or 11 kW instead of 22 kW
• Charging speed drops sharply after 50-60% state of charge
• The dashboard shows lower power than the charger rating
• Charging from 10% to 80% takes much longer than the advertised 30 minutes

What to Do

1. 1

   Use navigation to activate preconditioning

   Set the DC charger as your destination in the Smart #1's built-in navigation. This activates battery preconditioning, warming or cooling the battery to the ideal temperature before you arrive.

2. 2

   Check your state of charge

   If you are above 60%, the slower speed is expected. For the fastest DC charging, arrive between 10-20% and charge to 80%.

3. 3

   Verify the charger's actual output

   Check the charger display for its rated power. If it says 50 kW, that is your maximum regardless of the Smart #1's 150 kW capability. Look for chargers rated 150 kW or higher.

4. 4

   Check if the charger is shared

   If another car is using the adjacent connector on the same charger unit, you may be sharing power. Move to a charger with no other user if possible.

5. 5

   For AC, verify three-phase connection

   To get 22 kW AC, your wallbox must be wired for three-phase at 32A. Check with your electrician. If you only have single-phase, the maximum is about 7.4 kW.

6. 6

   Try a different charger

   If speeds are still low after checking everything, the charger may be degraded. Try another charger at the same station or a different location.

Reservation feature shown in app but not functional

The Electra app displays a reservation option for some stations, but the feature is not yet active or is only available at select locations. You may plan your stop expecting a reserved stall only to arrive and find no reservation system in place.

Symptoms

• App shows a 'Reserve' button but tapping it gives an error or does nothing
• You reserved a stall but there is no indication at the station that any stall is reserved for you
• Reservation confirmation appears in the app but the charger does not recognize it
• Other drivers are using the stall you thought was reserved

How to Fix It

1. 1

   Do not rely on reservations for trip planning

   Until Electra confirms that reservations are fully operational at a specific station, treat the feature as unavailable. Plan your stop based on real-time availability instead.

2. 2

   Check real-time stall availability before arriving

   Use the Electra app to see how many stalls are currently free at your target station. This is more reliable than trying to reserve ahead.

3. 3

   Arrive with a backup plan

   If the Electra station is full when you arrive, know the next closest fast charger. The Electra app or a multi-network app can help you find alternatives quickly.

4. 4

   Check Electra's announcements for reservation rollout

   Electra is actively developing the reservation feature. Check their app updates or social media for announcements about when and where it becomes available.

Queue management at busy stations

Electra stations at popular locations can get busy, especially during holidays and weekends. There is no formal queuing system, which leads to confusion about who is next.

Symptoms

• Multiple cars waiting with no clear order
• You arrived first but another driver took the next free stall
• No queue signage or numbering system at the station
• Drivers blocking the entrance while waiting for a stall

How to Fix It

1. 1

   Park clearly in the waiting area if one exists

   Some Electra stations have designated waiting bays. Park there so it is clear you are in the queue. If there is no marked area, park where you are visible but not blocking active chargers.

2. 2

   Communicate briefly with other waiting drivers

   A quick word with anyone else waiting establishes order. Something like 'I think I was here before you' avoids confusion when the next stall opens.

3. 3

   Monitor the app for stall availability

   Watch the Electra app for real-time updates. When a stall shows as available, move quickly. The driver at the charger may still be unplugging, so give them a moment.

4. 4

   Consider the next Electra station

   If the queue is long (3+ cars waiting), driving to the next station may be faster than waiting. Electra stations are often spaced along major routes with another option within 20 to 30 minutes.

Contactless card payment rejected

You tap your bank card at an Electra charger and the payment is declined. The charger does not start and you see an error on the payment terminal.

Symptoms

• Payment terminal shows 'Transaction declined' after tapping
• Card works everywhere else but fails at this Electra charger
• The contactless reader beeps but the session never starts
• Multiple cards fail at the same charger

How to Fix It

1. 1

   Try tapping again slowly

   Hold your card flat against the reader for a full 3 to 5 seconds. Payment terminals at chargers can be slower than shop terminals. Lifting the card too early causes a failed read.

2. 2

   Check your card's contactless transaction limit

   Electra pre-authorizes a hold (often 50 to 120 EUR). If your bank limits contactless transactions below this amount, the payment will fail. Check your banking app for contactless limits.

3. 3

   Try a different card

   Some bank cards have stricter fraud detection for charger payments. Try a different debit or credit card. Visa and Mastercard are both accepted.

4. 4

   Use the Electra app instead

   Start the session through the Electra app. App-initiated payments go through a different processing path and often work when the physical terminal does not.

5. 5

   Try another stall

   Individual payment terminals can malfunction. The terminal on the next stall may work fine even if this one does not.

Charging cable retraction mechanism stuck

Some Electra chargers have a cable retraction or management system that holds the cable neatly when not in use. Occasionally this mechanism jams, making it difficult to pull enough cable to reach your charge port.

Symptoms

• Cable will not pull out far enough to reach your car
• Cable is stuck in the retracted position and does not release
• You can pull the cable out but it snaps back when you let go
• The cable management arm or reel makes grinding noises

How to Fix It

1. 1

   Pull the cable firmly and steadily

   Some retraction systems have a release point. Pull the cable with consistent pressure rather than jerking it. You may feel a click when the lock releases.

2. 2

   Check for a manual release button

   Some charger models have a button or lever near the base of the cable management system that disengages the retraction mechanism. Look around the cable exit point.

3. 3

   Reposition your car closer

   If the cable is partially stuck and only extends partway, parking closer to the charger may give you enough reach. Back in if your charge port is at the rear.

4. 4

   Use a different stall

   If the cable mechanism is truly jammed, move to the next available stall. Report the stuck cable through the Electra app so maintenance can fix it.

App language defaults to French

Electra is a French company and the app sometimes defaults to French, especially after updates or when creating a new account. If you do not read French, navigating the app becomes difficult.

Symptoms

• App interface is entirely in French after installation
• Language changed to French after an app update
• Account creation screens are in French with no visible language toggle
• Notifications and emails from Electra arrive in French

How to Fix It

1. 1

   Check the app settings for a language option

   Open the Electra app, look for a gear icon or 'Parametres' (French for Settings). The language option may be listed as 'Langue.' Select English or your preferred language.

2. 2

   Change your phone's language setting temporarily

   Some apps follow the device language. If the Electra app does not have its own language toggle, changing your phone to English in system settings and restarting the app may switch it.

3. 3

   Delete and reinstall the app

   If the language is stuck, deleting and reinstalling the app with your phone set to your preferred language sometimes resets the default. You will need to log in again.

4. 4

   Use contactless payment to bypass the app entirely

   If the app language is a barrier and you just need to charge, use contactless card payment at the charger. No app required.