Porsche Taycan Charging at Badenova

Porsche Taycan Charger Will Not Start a Session

You are at the charger, the CCS2 connector is in, but nothing happens. The charger screen stays on the start page, or shows an error and resets. Charger startup problems on the Taycan are almost always about the connector fit, the charge port location, or authentication. Here is how to get the session going.

Symptoms

• Charger screen stays on the welcome page after plugging in
• Charger displays an error code and resets to the start screen
• Charge port light on the Taycan does not turn on or blinks red
• CCS2 connector clicks in but the car does not acknowledge it
• Charger says 'Vehicle not detected' or 'Communication error'

What to Do

1. 1

   Reinsert the CCS2 connector firmly

   Remove the connector completely, check for debris or ice in the Taycan's charge port, and reinsert it straight and firm until you hear and feel a click. The charge port light should turn on.

2. 2

   Check the charge port flap

   Make sure the charge port door on the right rear is fully open. If it is stuck, gently push it. In freezing conditions, use warm water (never force it) to free any ice. The flap must be clear of the connector path.

3. 3

   Confirm the car is in Park

   Check the PCM display to make sure the Taycan is in Park. Also check that no charging timer or schedule is blocking immediate charging. Go to Settings, then Charging, and verify that direct charging is enabled.

4. 4

   Authenticate with the charger

   Tap your RFID card, start the session in the charger operator's app, or use Porsche Charging Service through the My Porsche app. Make sure you select the correct stall number if using an app. Wait for the charger to confirm authorization before expecting the session to begin.

5. 5

   Try a different stall or station

   If the charger still will not start after reinserting the connector and authenticating, the charger may be faulty. Try a different stall at the same location. If all stalls fail, move to the nearest alternative station.

6. 6

   Restart the Taycan's infotainment system

   In rare cases, restarting the PCM can resolve communication issues. Hold down the center display button for about 10 seconds until the screen goes dark, then release. Wait for it to restart and try plugging in again.

Porsche Taycan Charging Payment Failed at Station

You are at the charger, your Taycan is plugged in, but the payment will not go through. The charger says 'Authorization failed' or the Porsche Charging Service app is not connecting. Payment issues are one of the top reasons a charging session never starts. Most of the time, the fix takes less than two minutes.

Symptoms

• Charger screen shows 'Authorization failed' or 'Payment declined'
• Porsche Charging Service does not start the session automatically
• RFID card tap produces an error or no response from the charger
• Contactless bank card is declined at the charger's payment terminal
• Charger accepts payment but the session ends immediately with zero kWh

What to Do

1. 1

   Check Porsche Charging Service status

   Open the My Porsche app and check your Charging Service contract. Make sure it is active and your payment method on file is valid. If it has expired, renew it or switch to a different payment method at the charger.

2. 2

   Try the charger operator's app

   Look for the network name on the charger (Ionity, Shell Recharge, Allego, EnBW, etc.). Open their app, add a payment method if you have not already, and start the session. Make sure the stall number in the app matches the number on the charger you are using.

3. 3

   Try a different payment method

   If your primary method fails, switch to a backup. Try a different RFID card, a different bank card for contactless, or a different charging app. Having at least two options covers most situations.

4. 4

   Check your card balance

   Open your banking app and verify you have enough available balance for the pre-authorization hold. Previous charging sessions may have pending holds that reduce your available balance temporarily.

5. 5

   Reset the charger and try again

   Press the stop or reset button on the charger. Wait for it to return to the welcome screen. Unplug the connector from your Taycan, wait 30 seconds, plug back in, and authenticate again.

6. 6

   Move to a different stall or station

   If nothing works, try a different stall at the same station. Payment terminals can fail independently. If the entire station is not processing payments, use your Taycan's PCM navigation or Google Maps to find the nearest alternative.

Porsche Taycan Charging Slower Than Expected

You plugged in your Porsche Taycan expecting 270 kW and the Porsche Communication Management screen shows 80 kW. Or your wallbox is stuck at 3 kW instead of 11 kW. The Taycan has one of the fastest charging architectures on the market, but real-world speeds depend on battery temperature, charger capability, and a few settings you can check yourself.

Symptoms

• DC fast charging speed well below the 270 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW or 22 kW
• Charging speed drops sharply after reaching 50-60%
• PCM shows lower power than the charger's rated output
• Charging session starts fast but slows down within minutes

What to Do

1. 1

   Use Porsche navigation for preconditioning

   Enter your charging stop as a destination in the Porsche Communication Management system. The Taycan will automatically precondition the battery to the ideal temperature during the drive. This is the single most effective way to reach peak charging speeds.

2. 2

   Check if the charger supports 800V

   Look at the charger's specifications, usually printed on the unit or shown in the operator's app. Chargers rated at 350 kW (like Ionity HPC) typically support 800V. If the charger is 50 kW or 150 kW, expect lower speeds regardless of your Taycan's capability.

3. 3

   Check your state of charge

   If you are above 80%, the slower speed is by design. For the fastest charging, arrive between 5-20% and charge to 80%. The Taycan's charging curve is steepest in this range.

4. 4

   Verify your AC charging setup

   For home charging, check whether your wallbox is wired for 3-phase power. In the Taycan's charging settings on PCM, confirm the AC charge current is set to maximum. If you have the 22 kW AC option, your wallbox must also support 22 kW.

5. 5

   Try a different charger or stall

   If speeds remain low at a DC charger, move to an unoccupied stall or a different station. Some chargers degrade over time and deliver less than their rated power. The My Porsche app or Porsche Charging Service can help find 800V-capable chargers nearby.

App-only payment with no backup option at the charger

Badenova chargers require the Badenova app to start a session. There is no contactless card reader on the charger and no RFID option. If the app is not working, you cannot charge.

Symptoms

• The charger has no contactless payment terminal or RFID reader
• You do not have the Badenova app installed and cannot download it at the station
• The app will not load or crashes when trying to start a session
• You have no mobile data signal at the station and cannot use the app

How to Fix It

1. 1

   Install and set up the Badenova app before you need it

   Download the Badenova app and create an account with a valid payment method before your first visit. Trying to set up an account at the station, possibly with poor signal, is a frustrating experience you can avoid.

2. 2

   Try connecting to Wi-Fi if your mobile data is weak

   Some Badenova stations or nearby businesses may offer Wi-Fi. If your mobile data is too weak to load the app, look for available networks. Even a slow connection is enough to start a session.

3. 3

   Restart the app or your phone

   If the app crashes or freezes, close it completely and reopen it. If that does not help, restart your phone. App-only chargers depend entirely on your phone working, so basic troubleshooting matters.

4. 4

   Drive to an alternative charger with contactless payment

   If the app is genuinely broken or you have no signal, you need a charger that accepts contactless payment or RFID. Check another charging app (Ionity, EnBW mobility+, or a roaming app) for the nearest alternative station. This is the downside of app-only networks: no app, no charge.

5. 5

   Check if a roaming app supports Badenova stations

   Some roaming platforms (like EnBW mobility+ or Maingau) may include Badenova stations. If you already have a roaming app installed, search for the station there. You can sometimes start a session through a roaming app when the native app is not cooperating.

Regional coverage limited to southwestern Germany

Badenova's network is concentrated in the Baden-Württemberg region, especially around Freiburg, the Upper Rhine area, and surrounding towns. Outside this region, you will not find Badenova chargers.

Symptoms

• The Badenova app shows no stations outside the Freiburg/Baden region
• You assumed Badenova coverage would extend along the Autobahn but it does not
• The nearest Badenova station is 100 km or more from your destination
• You are driving through Germany and planned stops based on Badenova but ran into coverage gaps

How to Fix It

1. 1

   Check Badenova coverage before planning your route

   Open the Badenova app and look at the station map. You will see that coverage is regional, not national. If your trip extends beyond southwestern Germany, you need additional networks.

2. 2

   Install apps for national German networks

   For travel across Germany, install EnBW mobility+ (large national network), Ionity (Autobahn-focused), or Fastned. These networks have stations along major highways throughout the country.

3. 3

   Use a roaming app for multi-network access

   EnBW mobility+ and Maingau EinfachStromLaden work as roaming apps that access chargers from dozens of operators. One app covers you across Germany instead of installing a separate app for each regional operator.

4. 4

   Plan with a multi-network route planner for longer trips

   A Better Routeplanner (ABRP) shows chargers from all operators. Enter your vehicle model and destination to get optimized stops. Badenova stations will appear where they exist, and other networks fill the gaps.

App interface in German only

The Badenova app is designed for the German market and the interface is in German. If German is not your language, navigating the app takes extra effort.

Symptoms

• All app menus and buttons are in German
• Error messages from the charger (shown in the app) are in German
• You cannot find the 'start session' button because labels are in German
• Account setup and payment forms are in German

How to Fix It

1. 1

   Learn the key German charging terms

   'Laden starten' means start charging. 'Laden beenden' means stop charging. 'Verfügbar' means available. 'Besetzt' means occupied. 'Außer Betrieb' means out of order. 'Bezahlung' means payment. These cover most of what you need.

2. 2

   Set up your account at home with a translation tool open

   Create your Badenova account and add your payment method at home where you can take your time. Use Google Translate or a similar tool to translate the forms. You only need to do this once.

3. 3

   Use your phone's built-in app translation

   On Android, the system can translate app interfaces into your language. On iOS, you can screenshot any page and use the built-in translation feature. This helps with settings you do not visit often.

4. 4

   Memorize the session flow

   The flow is the same every time: open app, find station on map, select charger, tap start. Once you know the sequence, the German labels are less of a barrier. Practice at home before your first real session.

Stations at company premises with limited access hours

Some Badenova chargers are installed at business locations or company parking areas that have restricted access during evenings, weekends, or holidays.

Symptoms

• You arrived at a station and the parking area is gated or locked
• The charger is accessible during business hours but not when you need it
• The app shows the station as available but you physically cannot reach it
• Weekend or holiday access is restricted

How to Fix It

1. 1

   Check the station details in the app for access hours

   Some Badenova stations list opening hours or access restrictions in the station details. Before driving there, look for notes about access times, especially if you plan to charge in the evening, early morning, or on weekends.

2. 2

   Look for a gate code or intercom

   Some company premises with public chargers provide a gate code or intercom button for EV drivers. Check the station listing in the app or look for instructions near the gate entrance.

3. 3

   Drive to a publicly accessible alternative

   If the station is behind a locked gate, your only option is to find another charger. Check the Badenova app or a roaming app for the next nearest station that is on a public road or in a publicly accessible parking area.

4. 4

   Prefer stations at public locations when planning ahead

   For reliability, prioritize Badenova stations that are on public streets or at commercial locations (supermarkets, public parking garages). These are accessible 24/7 regardless of business hours.

Fewer fallback stations when a charger is broken

Badenova is a smaller regional network. If the charger you planned to use is out of order, the next Badenova station may be far away. Larger networks offer more alternatives within a short drive.

Symptoms

• You arrived and the charger shows 'Außer Betrieb' (out of order)
• The next Badenova station is 20 km or more away
• You do not have another charging app installed
• Your battery is low and you need to charge now

How to Fix It

1. 1

   Check for other Badenova stations nearby

   Open the Badenova app and look at the map for alternative stations in the area. Even in their core region, stations may be spaced 10 to 30 km apart.

2. 2

   Search for chargers from other operators

   Open a roaming app (EnBW mobility+, Maingau, or Chargemap) and search for any available fast charger nearby, regardless of operator. In Baden-Württemberg, EnBW has good coverage that often fills Badenova's gaps.

3. 3

   Look for AC chargers as a last resort

   If no DC fast charger is available, an AC charger at a hotel, parking garage, or public lot can add enough range to reach the next working fast charger. It is slower, but it keeps you moving.

4. 4

   Report the broken charger in the Badenova app

   Let Badenova know the charger is out of order. Smaller networks depend on user reports to dispatch maintenance. Your report helps the next driver.

5. 5

   Always have a backup network app installed

   With any smaller regional network, carry at least one additional charging app (like EnBW mobility+ or Ionity) as insurance. Setting this up takes five minutes and saves you from being stranded.