MG MG5 Charging at Enel X Way

MG MG5 Charger Won't Start? Step-by-Step Help

You have plugged in your MG MG5 and the charging session refuses to start. The charger might be blinking, showing an error, or doing nothing at all. This is a common problem across all EVs, and the MG5 is no exception. Most causes are easy to diagnose and fix on the spot.

Symptoms

• Charger display shows an error or stays on the start screen
• CCS2 connector plugs in but charging does not initiate
• MG5 charge port light does not turn on or stays amber
• App shows the charger as available but the session does not begin
• AC Type 2 cable locks in but no power flows

What to Do

1. 1

   Read the charger screen

   Check for error messages, authentication prompts, or status indicators. If it says 'waiting for vehicle' the problem is on the car side. If it says 'error' or 'out of service,' the charger is the issue.

2. 2

   Unplug, wait, and replug

   Remove the connector completely, wait 15 seconds, and reinsert it firmly. Listen for the locking click on the MG5's charge port. This resets the communication handshake.

3. 3

   Complete authentication

   Tap your RFID card, open the network app and start the session, or use contactless payment. Some chargers need you to authenticate before plugging in, others after.

4. 4

   Check for scheduled charging

   Go to the MG5's charging settings on the infotainment screen. If a charging schedule is active, disable it to allow immediate charging.

5. 5

   Restart the car's systems

   Turn the MG5 off using the start button, wait 30 seconds, then turn it back on. This can clear temporary software glitches that prevent the charge port from communicating.

6. 6

   Move to another stall or station

   If the charger is at fault, try another stall. If no stalls work, the station may have a site-wide issue. Find an alternative station using your charging app.

MG MG5 Charging Payment Failed? How to Fix It

You are standing at a charger with your MG MG5 and the payment will not work. Card declined, app throwing errors, or no idea how to pay at all. This is one of the most frustrating parts of public charging, and it happens to everyone. Here is how to get past it.

Symptoms

• RFID card not recognized when tapped on the charger
• Charging app shows payment error or transaction declined
• Contactless card payment rejected at the terminal
• Charger starts authentication but then returns an error
• Session begins but ends immediately due to payment failure

What to Do

1. 1

   Identify accepted payment methods

   Look at the charger for payment logos and instructions. Note whether it accepts RFID cards, specific apps, contactless cards, or QR code payments. Each charger may support different methods.

2. 2

   Try the network's own app

   Download the charger network's app, create an account, and add a payment method. Then start the session through the app. This bypasses RFID and contactless issues.

3. 3

   Switch to an alternative payment method

   If your primary RFID card fails, try contactless with your bank card. If that fails, try a roaming provider like Plugsurfing, Shell Recharge, or Chargemap.

4. 4

   Check your bank for blocked transactions

   Open your banking app and look for declined or pending transactions. If the pre-authorization was blocked, call your bank or temporarily increase your card limit.

5. 5

   Try a different stall

   If the card reader on one stall is broken, another stall at the same station may have a working reader. Try the next one before giving up on the location.

6. 6

   Find an alternative station

   Use your charging app to find a nearby station from a network where your payment methods are confirmed to work. Filter by your preferred payment method if the app supports it.

MG MG5 Charging Slowly? Why and How to Fix It

Your MG MG5 is charging slower than you expected. With a maximum DC speed of 87kW, the MG5 is not the fastest charger in its class, but it should still deliver reasonable speeds. If you are seeing numbers well below that, something else is going on. Here is what to check.

Symptoms

• DC charging power showing well below 87kW on the charger display
• AC charging stuck below 11kW on a capable wallbox
• Estimated charging time significantly longer than expected
• Charging speed drops sharply above 50-60% SOC
• Very slow charging in cold weather conditions

What to Do

1. 1

   Check the charger's maximum power output

   Verify the charger is rated above 87kW. If it is a 50kW charger, the MG5 is getting the maximum available. Look at the charger label or check in the network app.

2. 2

   Use preconditioning in cold weather

   Set the fast charger as your destination in the MG5's navigation system. This activates battery preconditioning, which warms the battery before you arrive and improves initial charging speed.

3. 3

   Check your state of charge

   If you are above 60% SOC, the MG5's charging taper is expected. For the fastest session, arrive at the charger between 10-20% SOC and charge to 70-80%.

4. 4

   Try a different stall to avoid power sharing

   If the station shares power between stalls, wait for other cars to finish or move to a stall that is not paired with another active charger. Some stations label which stalls share power.

5. 5

   For AC, verify your cable and charger

   Make sure you are using a 3-phase Type 2 cable on an 11kW or higher AC charger. A single-phase connection limits you to about 3.6kW, which adds many hours to a full charge.

6. 6

   Check car settings for charging limits

   In the MG5's settings, look for any AC current limit or maximum charge level that might be capping your speed.

Old Enel X account not working after rebrand to Enel X Way

Enel rebranded its charging network from Enel X to Enel X Way. If you had an Enel X account, it may not work in the new Enel X Way app without migration.

Symptoms

• Login credentials from the old Enel X app are rejected in Enel X Way
• The old Enel X app still works but shows outdated station information
• You have the Enel X Way app but your payment methods and history did not transfer
• Password reset emails reference 'Enel X' instead of 'Enel X Way'

How to Fix It

1. 1

   Download the Enel X Way app (not the old Enel X app)

   The old Enel X app is being phased out. Search for 'Enel X Way' specifically in the App Store or Google Play. The icon and name are different from the legacy app.

2. 2

   Try logging in with your existing Enel X credentials

   Some accounts were automatically migrated. Try your old email and password in the Enel X Way app first. If it works, your history and payment methods should transfer.

3. 3

   Reset your password if login fails

   Use the 'Forgot password' option in the Enel X Way app. The migration may have reset your credentials. Enter the same email you used for Enel X.

4. 4

   Create a new Enel X Way account if migration fails

   If your old account cannot be recovered, create a new account in the Enel X Way app. You will lose your charging history but can start fresh with a working account.

5. 5

   Contact support for billing continuity

   If you had a subscription or prepaid balance on Enel X, contact Enel X Way support to have it transferred. Do not assume it carried over automatically.

Contactless payment terminal hard to reach

At some Enel X Way stations, the contactless payment terminal is positioned awkwardly, too high, at a strange angle, or behind a panel that is not obvious. This makes tapping your card difficult.

Symptoms

• You cannot find the contactless reader on the charger
• The reader is positioned above head height or behind a flap
• Your card tap does not register because the angle is wrong
• The contactless symbol is visible but the reader does not seem to respond

How to Fix It

1. 1

   Look for the contactless symbol on all sides of the charger

   Enel X Way chargers place the payment terminal in different positions depending on the hardware model. Check the front, sides, and any panels or flaps on the charger cabinet.

2. 2

   Hold your card flat against the reader for 3 to 5 seconds

   The reader may be recessed or behind a thick panel. A quick tap might not register. Hold your card steady and flat against the symbol area.

3. 3

   Try your phone's digital wallet

   If the reader is hard to reach with a physical card, try Apple Pay or Google Pay on your phone. The NFC range on a phone can be slightly better at odd angles.

4. 4

   Use the Enel X Way app instead

   If the contactless terminal is genuinely inaccessible or not responding, start the session through the Enel X Way app. The app bypasses the physical reader entirely.

Charger placed in tight parking spots

Some Enel X Way stations are installed in existing parking structures or small lots where the charging spots are narrow. Maneuvering a larger EV into position and accessing the cable can be difficult.

Symptoms

• Charging spot is too narrow to open your car door fully
• Cable does not reach your vehicle's charging port because of the parking angle
• Other parked cars block access to the charger
• You have to reverse in at a specific angle to make the cable reach

How to Fix It

1. 1

   Check your vehicle's charging port location

   Before pulling in, note which side your charging port is on (front left, rear right, etc.) and position your car so the port faces the charger. This avoids stretching the cable across the car.

2. 2

   Try reversing in if the port is at the rear

   If your charging port is at the rear of the vehicle, reversing into the spot often gives you a shorter cable run and more room to connect.

3. 3

   Check adjacent spots before plugging in

   If two chargers are side by side and one has more room, use the more accessible one even if it means a slightly longer walk.

4. 4

   Leave your car door ajar while connecting

   Plug in the cable, then close your door and start the session from inside or via the app. You do not need to stand next to the charger for the entire session.

Power fluctuations or reduced charging speed

Some Enel X Way locations experience power fluctuations, especially during peak grid demand. Your charging speed may drop unexpectedly or fluctuate throughout the session.

Symptoms

• Charging speed starts high but drops significantly after a few minutes
• Speed fluctuates between 50 and 200 kW without stabilizing
• The charger delivers well below its advertised maximum
• Speed is lower in the evening than during daytime at the same station

How to Fix It

1. 1

   Check your battery level and temperature

   Most speed drops are caused by your vehicle, not the charger. Above 60 to 80% state of charge, your vehicle reduces its charging speed to protect the battery. Cold batteries also charge more slowly.

2. 2

   Check if other chargers at the station are in use

   Some Enel X Way stations share a power connection. If multiple chargers are active, the available power is split. Try charging when fewer vehicles are plugged in.

3. 3

   Try a different time of day

   Grid demand peaks in the early evening. If you notice slower speeds at certain hours, try charging during off-peak times (late evening or early morning) when the grid is less loaded.

4. 4

   Try a different charger unit

   An individual charger may have a hardware limitation. Another unit at the same station might deliver higher power.

5. 5

   Report persistent low speeds

   If a station consistently delivers far below its rated power, report it in the Enel X Way app. This helps their maintenance team investigate whether it is a hardware or grid supply issue.

App shows incorrect real-time availability

The Enel X Way app sometimes displays charger availability that does not match reality. You arrive expecting a free charger and find it occupied, or the app shows a charger as faulted when it actually works.

Symptoms

• App shows 'Available' but the charger is occupied when you arrive
• App shows 'Out of order' but the charger works fine
• Availability status does not change even after refreshing
• You planned your route based on app availability and found no working chargers

How to Fix It

1. 1

   Refresh the station page and check timestamps

   Pull down to refresh the station detail view. If the status was last updated more than 10 minutes ago, it may be stale.

2. 2

   Try plugging in regardless of the app status

   If the charger looks physically operational (lights on, screen active, no maintenance stickers), try plugging in and starting a session. The app status may simply be lagging.

3. 3

   Cross-check with another app

   Open Chargemap, Google Maps, or another charging app that shows Enel X Way stations. A different data source might have more current availability information.

4. 4

   Always have a backup station identified

   Do not rely on a single station, especially for long trips. Identify 1 or 2 alternative stations nearby before setting out, in case availability data is wrong.