Enel X Way Charger Not Working?

Symptoms

• Login credentials from the old Enel X app are rejected in Enel X Way
• The old Enel X app still works but shows outdated station information
• You have the Enel X Way app but your payment methods and history did not transfer
• Password reset emails reference 'Enel X' instead of 'Enel X Way'

How to Fix It

1. 1

   Download the Enel X Way app (not the old Enel X app)

   The old Enel X app is being phased out. Search for 'Enel X Way' specifically in the App Store or Google Play. The icon and name are different from the legacy app.

2. 2

   Try logging in with your existing Enel X credentials

   Some accounts were automatically migrated. Try your old email and password in the Enel X Way app first. If it works, your history and payment methods should transfer.

3. 3

   Reset your password if login fails

   Use the 'Forgot password' option in the Enel X Way app. The migration may have reset your credentials. Enter the same email you used for Enel X.

4. 4

   Create a new Enel X Way account if migration fails

   If your old account cannot be recovered, create a new account in the Enel X Way app. You will lose your charging history but can start fresh with a working account.

5. 5

   Contact support for billing continuity

   If you had a subscription or prepaid balance on Enel X, contact Enel X Way support to have it transferred. Do not assume it carried over automatically.

Symptoms

• You cannot find the contactless reader on the charger
• The reader is positioned above head height or behind a flap
• Your card tap does not register because the angle is wrong
• The contactless symbol is visible but the reader does not seem to respond

How to Fix It

1. 1

   Look for the contactless symbol on all sides of the charger

   Enel X Way chargers place the payment terminal in different positions depending on the hardware model. Check the front, sides, and any panels or flaps on the charger cabinet.

2. 2

   Hold your card flat against the reader for 3 to 5 seconds

   The reader may be recessed or behind a thick panel. A quick tap might not register. Hold your card steady and flat against the symbol area.

3. 3

   Try your phone's digital wallet

   If the reader is hard to reach with a physical card, try Apple Pay or Google Pay on your phone. The NFC range on a phone can be slightly better at odd angles.

4. 4

   Use the Enel X Way app instead

   If the contactless terminal is genuinely inaccessible or not responding, start the session through the Enel X Way app. The app bypasses the physical reader entirely.

Symptoms

• Charging spot is too narrow to open your car door fully
• Cable does not reach your vehicle's charging port because of the parking angle
• Other parked cars block access to the charger
• You have to reverse in at a specific angle to make the cable reach

How to Fix It

1. 1

   Check your vehicle's charging port location

   Before pulling in, note which side your charging port is on (front left, rear right, etc.) and position your car so the port faces the charger. This avoids stretching the cable across the car.

2. 2

   Try reversing in if the port is at the rear

   If your charging port is at the rear of the vehicle, reversing into the spot often gives you a shorter cable run and more room to connect.

3. 3

   Check adjacent spots before plugging in

   If two chargers are side by side and one has more room, use the more accessible one even if it means a slightly longer walk.

4. 4

   Leave your car door ajar while connecting

   Plug in the cable, then close your door and start the session from inside or via the app. You do not need to stand next to the charger for the entire session.

Symptoms

• Charging speed starts high but drops significantly after a few minutes
• Speed fluctuates between 50 and 200 kW without stabilizing
• The charger delivers well below its advertised maximum
• Speed is lower in the evening than during daytime at the same station

How to Fix It

1. 1

   Check your battery level and temperature

   Most speed drops are caused by your vehicle, not the charger. Above 60 to 80% state of charge, your vehicle reduces its charging speed to protect the battery. Cold batteries also charge more slowly.

2. 2

   Check if other chargers at the station are in use

   Some Enel X Way stations share a power connection. If multiple chargers are active, the available power is split. Try charging when fewer vehicles are plugged in.

3. 3

   Try a different time of day

   Grid demand peaks in the early evening. If you notice slower speeds at certain hours, try charging during off-peak times (late evening or early morning) when the grid is less loaded.

4. 4

   Try a different charger unit

   An individual charger may have a hardware limitation. Another unit at the same station might deliver higher power.

5. 5

   Report persistent low speeds

   If a station consistently delivers far below its rated power, report it in the Enel X Way app. This helps their maintenance team investigate whether it is a hardware or grid supply issue.

Symptoms

• App shows 'Available' but the charger is occupied when you arrive
• App shows 'Out of order' but the charger works fine
• Availability status does not change even after refreshing
• You planned your route based on app availability and found no working chargers

How to Fix It

1. 1

   Refresh the station page and check timestamps

   Pull down to refresh the station detail view. If the status was last updated more than 10 minutes ago, it may be stale.

2. 2

   Try plugging in regardless of the app status

   If the charger looks physically operational (lights on, screen active, no maintenance stickers), try plugging in and starting a session. The app status may simply be lagging.

3. 3

   Cross-check with another app

   Open Chargemap, Google Maps, or another charging app that shows Enel X Way stations. A different data source might have more current availability information.

4. 4

   Always have a backup station identified

   Do not rely on a single station, especially for long trips. Identify 1 or 2 alternative stations nearby before setting out, in case availability data is wrong.