MG MG5 Charging at Fastned

MG MG5 Charger Won't Start? Step-by-Step Help

You have plugged in your MG MG5 and the charging session refuses to start. The charger might be blinking, showing an error, or doing nothing at all. This is a common problem across all EVs, and the MG5 is no exception. Most causes are easy to diagnose and fix on the spot.

Symptoms

• Charger display shows an error or stays on the start screen
• CCS2 connector plugs in but charging does not initiate
• MG5 charge port light does not turn on or stays amber
• App shows the charger as available but the session does not begin
• AC Type 2 cable locks in but no power flows

What to Do

1. 1

   Read the charger screen

   Check for error messages, authentication prompts, or status indicators. If it says 'waiting for vehicle' the problem is on the car side. If it says 'error' or 'out of service,' the charger is the issue.

2. 2

   Unplug, wait, and replug

   Remove the connector completely, wait 15 seconds, and reinsert it firmly. Listen for the locking click on the MG5's charge port. This resets the communication handshake.

3. 3

   Complete authentication

   Tap your RFID card, open the network app and start the session, or use contactless payment. Some chargers need you to authenticate before plugging in, others after.

4. 4

   Check for scheduled charging

   Go to the MG5's charging settings on the infotainment screen. If a charging schedule is active, disable it to allow immediate charging.

5. 5

   Restart the car's systems

   Turn the MG5 off using the start button, wait 30 seconds, then turn it back on. This can clear temporary software glitches that prevent the charge port from communicating.

6. 6

   Move to another stall or station

   If the charger is at fault, try another stall. If no stalls work, the station may have a site-wide issue. Find an alternative station using your charging app.

MG MG5 Charging Payment Failed? How to Fix It

You are standing at a charger with your MG MG5 and the payment will not work. Card declined, app throwing errors, or no idea how to pay at all. This is one of the most frustrating parts of public charging, and it happens to everyone. Here is how to get past it.

Symptoms

• RFID card not recognized when tapped on the charger
• Charging app shows payment error or transaction declined
• Contactless card payment rejected at the terminal
• Charger starts authentication but then returns an error
• Session begins but ends immediately due to payment failure

What to Do

1. 1

   Identify accepted payment methods

   Look at the charger for payment logos and instructions. Note whether it accepts RFID cards, specific apps, contactless cards, or QR code payments. Each charger may support different methods.

2. 2

   Try the network's own app

   Download the charger network's app, create an account, and add a payment method. Then start the session through the app. This bypasses RFID and contactless issues.

3. 3

   Switch to an alternative payment method

   If your primary RFID card fails, try contactless with your bank card. If that fails, try a roaming provider like Plugsurfing, Shell Recharge, or Chargemap.

4. 4

   Check your bank for blocked transactions

   Open your banking app and look for declined or pending transactions. If the pre-authorization was blocked, call your bank or temporarily increase your card limit.

5. 5

   Try a different stall

   If the card reader on one stall is broken, another stall at the same station may have a working reader. Try the next one before giving up on the location.

6. 6

   Find an alternative station

   Use your charging app to find a nearby station from a network where your payment methods are confirmed to work. Filter by your preferred payment method if the app supports it.

MG MG5 Charging Slowly? Why and How to Fix It

Your MG MG5 is charging slower than you expected. With a maximum DC speed of 87kW, the MG5 is not the fastest charger in its class, but it should still deliver reasonable speeds. If you are seeing numbers well below that, something else is going on. Here is what to check.

Symptoms

• DC charging power showing well below 87kW on the charger display
• AC charging stuck below 11kW on a capable wallbox
• Estimated charging time significantly longer than expected
• Charging speed drops sharply above 50-60% SOC
• Very slow charging in cold weather conditions

What to Do

1. 1

   Check the charger's maximum power output

   Verify the charger is rated above 87kW. If it is a 50kW charger, the MG5 is getting the maximum available. Look at the charger label or check in the network app.

2. 2

   Use preconditioning in cold weather

   Set the fast charger as your destination in the MG5's navigation system. This activates battery preconditioning, which warms the battery before you arrive and improves initial charging speed.

3. 3

   Check your state of charge

   If you are above 60% SOC, the MG5's charging taper is expected. For the fastest session, arrive at the charger between 10-20% SOC and charge to 70-80%.

4. 4

   Try a different stall to avoid power sharing

   If the station shares power between stalls, wait for other cars to finish or move to a stall that is not paired with another active charger. Some stations label which stalls share power.

5. 5

   For AC, verify your cable and charger

   Make sure you are using a 3-phase Type 2 cable on an 11kW or higher AC charger. A single-phase connection limits you to about 3.6kW, which adds many hours to a full charge.

6. 6

   Check car settings for charging limits

   In the MG5's settings, look for any AC current limit or maximum charge level that might be capping your speed.

Autocharge not recognizing your vehicle

You have Autocharge set up in the Fastned app, but when you plug in, the charger asks for payment instead of starting automatically.

Symptoms

• Charger screen prompts for app or card payment after plugging in
• Screen shows 'Vehicle not recognized' or goes straight to the payment screen
• Autocharge worked at other Fastned stations but not this one
• You recently changed your vehicle or payment method in the Fastned app

How to Fix It

1. 1

   Check Autocharge status in the Fastned app

   Open the Fastned app, go to your account or Autocharge settings, and verify that Autocharge is toggled on and linked to your current vehicle. If you switched vehicles recently, you may need to re-register the new one.

2. 2

   Unplug, wait 15 seconds, and plug in again

   The Autocharge handshake happens in the first few seconds. If the timing was off or the connector was not fully seated, the charger defaults to manual payment. Try again with a firm, steady plug-in.

3. 3

   Make sure your payment method is valid

   Autocharge bills your saved payment method automatically. If the card on file has expired or been blocked, Autocharge will fail even though your vehicle is recognized. Update your payment details in the Fastned app.

4. 4

   Verify your vehicle supports Autocharge

   Autocharge requires the vehicle to transmit a unique identifier through the charging cable (MAC address). Most newer EVs support this, but some older models or specific firmware versions do not. Check Fastned's website for a compatibility list.

5. 5

   Start the session via the app as a workaround

   If Autocharge is not cooperating, open the Fastned app, select the station and charger, and start the session manually. You will still get your Gold Member or regular pricing.

Contactless card reader not responding

You tap your debit or credit card on the contactless reader, but nothing happens. No beep, no screen change, no error.

Symptoms

• No response from the reader when tapping a card
• Reader beeps but the screen shows 'Transaction failed'
• Card works at shops and other chargers but not at this Fastned station
• Apple Pay or Google Pay does not trigger the reader

How to Fix It

1. 1

   Locate the correct reader

   Fastned chargers have the contactless reader built into the charger unit. It is usually a small pad with the contactless symbol near the screen. Make sure you are tapping on the reader, not on the screen itself.

2. 2

   Hold your card still for 3 to 5 seconds

   Do not tap and remove quickly. Hold the card flat against the reader and wait. Some readers are slower than retail terminals.

3. 3

   Remove your card from its wallet or phone case

   Other cards, RFID badges, or phone cases with magnets can interfere with the contactless signal. Try the card on its own, directly on the reader.

4. 4

   Try a different card

   Some card issuers block pre-authorization transactions above a certain threshold. Fastned may pre-authorize 100 EUR or more. If your card's contactless limit is lower, the transaction fails.

5. 5

   Use the Fastned app instead

   If the contactless reader is faulty, start the session through the Fastned app. You can also use a roaming RFID card from providers like Shell Recharge or Chargemap.

Charger cable too short for your vehicle

The charging cable attached to the Fastned station does not reach your vehicle's charge port. This depends on your vehicle's port position and how you park.

Symptoms

• Cable reaches the port but is stretched tight with no slack
• Cable does not reach at all when parked normally
• You need to reverse in or park at an awkward angle
• Cable reaches but the connector presses against the car body at a sharp angle

How to Fix It

1. 1

   Reposition your vehicle

   Try parking closer to the charger or at a different angle. If your charge port is on the front left, back in so the port is closest to the cable. Many Fastned stations are designed for pull-through parking.

2. 2

   Try the other cable

   Fastned chargers typically have two cables (CCS2 and CHAdeMO, or two CCS2 cables from different sides). The cable on the other side of the charger may reach more easily.

3. 3

   Try a different charger at the same station

   If the station has multiple charger units, another one may give you a better angle. Charger positions vary slightly across units.

4. 4

   Do not force a stretched cable

   A cable under tension can damage the connector, your charge port, or the cable itself. If it does not reach comfortably, reposition the car. A damaged connector can shut down the charger for everyone.

Speed throttling when multiple vehicles are charging

Your charging speed drops when other vehicles start charging at the same Fastned station. This is power sharing in action.

Symptoms

• Charging started at 150 kW and dropped to 80 kW when another car plugged in
• Speed is lower at a busy station than at the same station when it was empty
• Dashboard shows the charger is limiting power, not the battery
• Speed fluctuates as other vehicles arrive and leave

How to Fix It

1. 1

   Understand how Fastned power sharing works

   Most Fastned stations have a total power budget shared across all active chargers. When more vehicles charge simultaneously, each one gets a smaller share. This is a station design limitation, not a fault.

2. 2

   Charge during off-peak hours if possible

   Fastned stations along highways are busiest during weekend travel peaks and holiday periods. Early morning or late evening sessions often mean you have the station to yourself and get full speed.

3. 3

   Choose a station with more capacity

   Newer Fastned stations and recently upgraded locations tend to have larger power budgets. The Fastned app shows the maximum kW per station. Stations rated at 400 kW per charger usually have more headroom than 150 kW stations.

4. 4

   Do not wait for full speed. Charge what you need and go.

   Even at reduced speed, DC fast charging is much faster than AC. If you are getting 80 kW instead of 150 kW, it takes a few extra minutes, not hours. Charge to 80% and continue your trip.

Busy station with no queue management

You arrive at a Fastned station and all chargers are occupied. There is no official way to join a queue or reserve a spot.

Symptoms

• All chargers are in use and multiple cars are waiting
• No clear queue order. Confusion about who arrived first.
• App does not show how many vehicles are waiting
• You are not sure if you should wait or drive to another station

How to Fix It

1. 1

   Check the Fastned app for nearby alternatives

   Before committing to a wait, check if there is another Fastned station or competitor fast charger within 10 to 15 minutes. Waiting 20 minutes for a spot is often slower than driving to a nearby empty station.

2. 2

   Communicate with other waiting drivers

   Fastned does not have a formal queue system. If you decide to wait, make yourself visible by parking near the charger area and, if comfortable, let other waiting drivers know you are in line. Brief eye contact and a nod go a long way.

3. 3

   Watch for vehicles at high state of charge

   If a vehicle on the charger is already above 80%, it will likely leave soon. Drivers charging from 80 to 100% at a DC fast charger are rare. Most will unplug and leave within minutes.

4. 4

   Plan stops to avoid peak times

   Holiday weekends, Friday afternoons, and Sunday evenings are the busiest. If your schedule is flexible, adjusting departure time by an hour or two can make a significant difference in charger availability.

5. 5

   Send feedback to Fastned

   Fastned expands stations based on utilization data. If a station is consistently full, reporting it through the app helps Fastned prioritize adding more chargers at that location.