Mercedes eVito Charging at BP Pulse

Mercedes eVito Van Charger Will Not Start a Session

You have connected the charger to your Mercedes eVito and nothing is happening. No session, no power, no charging light. When you are between jobs or trying to charge at the depot, you need this resolved quickly. Here is how.

Symptoms

• CCS2 or Type 2 connector is plugged in but no session starts
• The MBUX display does not show charging activity
• The charger screen shows an error after plug-in
• The charge port indicator stays off or flashes amber
• The depot wallbox status light does not change when plugged in

What to Do

1. 1

   Authenticate before plugging in

   At public chargers, tap your RFID card or start the session in the app before inserting the connector. Wait for the charger to confirm it is ready.

2. 2

   Clean and reinsert the connector

   Remove the connector, wipe the charge port on the eVito with a dry cloth to remove any dirt, then reinsert the connector firmly until it clicks.

3. 3

   Check MBUX charging settings

   On the MBUX display, navigate to the charging menu. Check if departure time charging is active. Disable it for immediate charging.

4. 4

   Check the depot electrical panel

   If at the depot, check the circuit breaker for the charging circuit. Also check the wallbox status indicator. Report issues to your fleet manager.

5. 5

   Lock and unlock the van

   Use the key to lock the eVito, wait 20 seconds, then unlock. This can reset the charging electronics after a fault state.

6. 6

   Move to a different charger

   If the charger is faulty, do not waste time. Move to another unit or station, especially if you are mid-route.

Mercedes eVito Van Payment Failed at Charging Station

You are at a public charger with your Mercedes eVito and the payment will not go through. Whether it is a fleet card, personal RFID, or an app, payment failures at public chargers waste time between jobs. Here is how to resolve it fast.

Symptoms

• Fleet card does not start a session at the charger
• RFID card tap produces no response
• Charging app shows a payment authorization error
• Contactless bank card is declined
• Charger shows 'payment failed' on the screen

What to Do

1. 1

   Check accepted payment methods

   Look at the charger stickers and screen for accepted networks and cards. If your fleet card logo is not shown, this charger is not on your network.

2. 2

   Try a different payment method

   Switch between fleet card, personal RFID, charging app, and contactless bank card. One may work where others fail.

3. 3

   Verify fleet card status

   Contact your fleet manager or check the fleet card provider app to confirm the card is active and has not hit a spending limit.

4. 4

   Hold the card steadily

   Place the card flat against the reader for 3 seconds. Do not tap and pull away quickly. Gloves can interfere with NFC reading.

5. 5

   Cancel and retry

   Cancel any pending session in the app, wait 60 seconds, and start a fresh attempt.

6. 6

   Move to another charger unit

   If the payment reader on this unit is broken, try the next charger at the station. Do not waste time troubleshooting hardware you cannot fix.

Mercedes eVito Van Charging Slower Than Expected Speed

Your Mercedes eVito is charging slower than the 110 kW DC maximum. Or your depot wallbox is barely delivering power overnight. Without battery preconditioning, the eVito is especially sensitive to cold weather. Here is what to check and how to improve your charging speed.

Symptoms

• DC fast charging well below the 110 kW maximum
• Depot AC charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops quickly after 40-50% state of charge
• Winter charging starts extremely slowly
• Mid-route DC charging takes too long between jobs

What to Do

1. 1

   Drive before charging in cold weather

   Since the eVito lacks preconditioning, drive for at least 20-30 minutes before stopping at a DC charger in winter. This warms the battery through use.

2. 2

   Charge between 20-50% for fastest speeds

   Plan your mid-route charging stops to arrive between 20-50% state of charge. This is where the eVito can approach its 110 kW peak.

3. 3

   Check your depot charger wiring

   Ask your fleet manager or electrician to verify the depot wallbox is wired for three-phase at 16A per phase for 11 kW. Single-phase installations are common but much slower.

4. 4

   Choose unshared DC chargers

   At public stations, check if the charger is sharing power. If another vehicle is on the paired connector, try a different unit.

5. 5

   Use MBUX to check charging status

   The MBUX infotainment system shows current charging power and estimated time. Use this to verify speeds and decide if you should move to a different charger.

6. 6

   Try a different charger

   If speeds remain well below expected at a low state of charge, the charger may be faulty. Move to another unit.

Contactless reader not responding

You tap your bank card or phone and nothing happens. The screen does not acknowledge the tap at all, or it briefly flashes and returns to the start screen.

Symptoms

• No beep or screen change after tapping your card
• Screen flashes 'Card read error' then resets
• Apple Pay or Google Pay shows 'Done' on your phone but the charger does not start
• Reader works on one unit but not the adjacent one

How to Fix It

1. 1

   Try a physical bank card instead of your phone

   Contactless phone payments sometimes fail on BP Pulse readers even when a physical card works fine. Hold the card flat against the reader for 2-3 seconds.

2. 2

   Check for a second tap point

   Some BP Pulse units have the contactless reader on the side panel rather than below the screen. Look for a card symbol printed on the housing.

3. 3

   Clean the reader surface

   Wipe dirt, rain, or condensation off the contactless reader area with your sleeve. Moisture on the sensor can prevent a clean read.

4. 4

   Start the session via the BP Pulse app instead

   Open the app, find the charger on the map, select the connector, and tap 'Start Charging.' This bypasses the physical reader entirely.

5. 5

   Try the other connector or an adjacent unit

   If the charger has two connectors, the other side may have a working reader. Or walk to the next unit. Contactless reader failures are often limited to one specific unit.

BP Pulse app crashing on Android

The app closes unexpectedly when you try to start a session, view the map, or enter payment details. This is more common on older Android versions and after recent app updates.

Symptoms

• App closes immediately after opening
• App freezes on the map screen then crashes
• Crash when tapping 'Start Charging' after selecting a connector
• 'App keeps stopping' notification from Android

How to Fix It

1. 1

   Force close and reopen the app

   Go to Android Settings, then Apps, then BP Pulse. Tap 'Force Stop,' wait a few seconds, then open the app again.

2. 2

   Clear the app cache

   In Settings, go to Apps, then BP Pulse, then Storage, then 'Clear Cache.' This removes temporary data without deleting your account. You will not need to log in again.

3. 3

   Check for an app update

   Open the Google Play Store, search for BP Pulse, and tap 'Update' if available. Crashes often follow a buggy release that gets patched within days.

4. 4

   Use contactless payment as a backup

   If the app will not cooperate, tap your bank card on the charger's contactless reader to start a session without the app.

5. 5

   Reinstall the app if crashes persist

   Uninstall BP Pulse, restart your phone, then reinstall from the Play Store. You will need to log in again, so make sure you know your BP Pulse account email.

Charger shows 'Out of Service' with no visible damage

The screen displays 'Out of Service' or 'Unavailable,' but the charger looks perfectly fine. No broken cables, no barrier tape, no obvious reason it should be offline.

Symptoms

• Screen stuck on 'Out of Service' message
• Charger appears available in the app but shows error on arrival
• Status light is red or off entirely
• Other chargers at the same location work fine

How to Fix It

1. 1

   Check the BP Pulse app for real-time status

   Open the app and look at this specific charger. If it shows as unavailable there too, the network has flagged it remotely. A maintenance team likely already knows.

2. 2

   Look for a reset button or power switch

   Some older BP Pulse units (especially former Chargemaster ones) have a small reset button behind a panel or near the base. Pressing it can sometimes clear a stuck error state.

3. 3

   Report it in the app

   Use the 'Report a problem' option on the charger's detail page in the BP Pulse app. This helps BP Pulse prioritize repairs and updates the status for other drivers.

4. 4

   Move to another charger

   An 'Out of Service' state usually means a backend fault, a communication issue with the network, or a pending software update. You cannot fix these yourself. Use another unit or location.

Charging session drops after 5-10 minutes

Charging starts normally, but the session ends on its own after a few minutes. Your car shows it is no longer receiving power, and the charger returns to the welcome screen.

Symptoms

• Car dashboard shows charging stopped unexpectedly
• Charger screen returns to 'Plug in to start' after a few minutes
• You receive a session-ended notification in the app with a very short session
• This happens repeatedly at the same charger

How to Fix It

1. 1

   Check the connector is fully seated

   Unplug the cable, inspect the connector pins for dirt or debris, and plug it back in firmly until you hear a click. A loose connection can cause the charger to drop the session.

2. 2

   Check your car's charge limit

   If your car's charge limit is set very close to the current battery level, some vehicles will stop charging almost immediately. Set the limit to 80% or higher and try again.

3. 3

   Try the other connector type

   If the charger offers both CCS2 and CHAdeMO and your car supports CCS2, make sure you are using CCS2. Using the wrong connector obviously will not fit, but a worn CCS2 connector on one side may work better on the other unit.

4. 4

   Start a new session at a different unit

   Repeated drops at the same charger point to a hardware fault on that unit. Move to another charger and try again.

5. 5

   Report the faulty unit

   Note the charger ID (printed on the unit) and report it via the BP Pulse app or call the BP Pulse support number shown on the charger. This helps get the unit serviced.

Subscription vs pay-as-you-go pricing confusion

BP Pulse offers a subscription plan with lower per-kWh rates and a pay-as-you-go option with higher rates. It is not always clear which pricing you are on, or whether the subscription is worth it for your usage.

Symptoms

• Charged a higher rate than expected on your receipt
• Unsure whether your subscription is active
• Signed up for subscription but still seeing non-member prices
• Cannot figure out how to switch between plans

How to Fix It

1. 1

   Check your plan status in the app

   Open the BP Pulse app, go to your account settings, and look for your subscription status. If it says 'Active,' you should be getting the lower rate automatically.

2. 2

   Make sure you are starting sessions through the app

   Subscription pricing only applies when you start the session via the BP Pulse app or RFID card linked to your account. Tapping a contactless bank card will charge you the standard pay-as-you-go rate.

3. 3

   Review your charging history for rate discrepancies

   In the app, go to Charging History and check the per-kWh rate on recent sessions. Compare this to the subscription rate listed on the BP Pulse pricing page.

4. 4

   Cancel or change your plan if needed

   You can manage your subscription in the app under Account, then Subscription. If you charge infrequently, pay-as-you-go may actually cost less overall despite the higher per-kWh rate.