Mercedes-Benz EQS Charging at Enel X Way

Mercedes-Benz EQS Charger Won't Start a Session

You connected the CCS2 cable to your EQS's right rear charge port, but the Hyperscreen shows no charging activity. No power flowing, no progress. This is frustrating, especially in a flagship sedan where everything should just work. The cause is usually authentication, cable seating, or the charger itself, not the EQS.

Symptoms

• CCS2 connector plugged in but the Hyperscreen shows no charging activity
• Charger screen displays an error or stays idle after authentication attempt
• Plug & Charge does not authenticate automatically at a supported station
• Charge port LED does not illuminate or blinks an error pattern
• Mercedes me app shows the EQS as connected but not charging

What to Do

1. 1

   Remove and firmly reseat the CCS2 connector

   Pull the connector out of the right rear charge port. Check for debris or moisture. Push it back in straight and firm until you hear a click and see the charge port LED respond. The CCS2 connector is heavy, so support it with both hands to ensure proper alignment.

2. 2

   Authenticate manually if Plug & Charge failed

   Open the charging network's app and start the session by scanning the QR code or selecting the charger. If you have an RFID card for this network, tap it on the reader. Do not wait for Plug & Charge if it did not work within 30 seconds.

3. 3

   Disable scheduled charging in MBUX

   On the Hyperscreen, open Settings, then Charging. Turn off any departure time or scheduled charging window. At a public charger, you want charging to start immediately. Re-enable scheduled charging when you are back at your home wallbox.

4. 4

   Lock and unlock the EQS to reset the charge controller

   Use the key or Mercedes me app to lock the car. Wait 15 seconds, then unlock. This resets the charge port locking mechanism and the onboard charging communication module. Reconnect the cable after unlocking.

5. 5

   Try a different connector or charger at the station

   If the station has multiple CCS2 connectors, try a different one. If the entire station seems unresponsive, use MBUX navigation to find another nearby charger. Report the faulty charger through the network's app.

Mercedes-Benz EQS Payment Failed at Charging Station

You are standing next to your EQS at a public charger and payment will not go through. Plug & Charge did not activate, the app shows an error, or your card was declined. Payment failures are one of the most common reasons charging sessions do not start. With the EQS, you have multiple authentication options to try before giving up.

Symptoms

• Plug & Charge does not authenticate when the CCS2 cable is connected
• Contactless card declined at the charger's payment terminal
• Mercedes me Charge or the network's app shows a payment error
• RFID card not recognized by the charger reader
• Session starts but stops immediately with a billing-related error

What to Do

1. 1

   Try Plug & Charge by connecting the cable

   Plug the CCS2 connector into the EQS's right rear charge port. Wait up to 30 seconds for Plug & Charge to authenticate. Check the Hyperscreen for a charging confirmation. If nothing happens after 30 seconds, Plug & Charge is not working at this station.

2. 2

   Use the charging network's app to start the session

   Open the app for the charging network shown on the charger. Scan the QR code or enter the charger ID. Start the session through the app. Verify your payment method in the app is valid and not expired.

3. 3

   Try contactless payment at the charger terminal

   If the charger has a contactless payment terminal, tap your bank card, Apple Pay, or Google Pay. If the first card is declined, try a different one. Some terminals accept only certain card brands.

4. 4

   Verify your Mercedes me Charge account

   Open the Mercedes me app. Go to Charge settings and check that Plug & Charge is enabled and your payment method is current. If you recently changed your payment method, it may need time to sync. Try restarting the Mercedes me app.

5. 5

   Try a different RFID card or roaming provider

   If you carry multiple RFID cards, try another network. Roaming providers with broad European coverage (Chargemap, Maingau, Shell Recharge) can fill gaps where Mercedes me Charge does not reach.

6. 6

   Find an alternative charger nearby

   If payment fails on this charger entirely, use the Hyperscreen to find another station nearby. A different charging network may accept your payment method. Filter by the networks you know work with your cards.

Mercedes-Benz EQS Charging Slower Than Expected

You plugged in your EQS at a 300 kW charger expecting close to 200 kW, but the Hyperscreen shows 50 kW. Or your home wallbox is stuck at 3.6 kW instead of 11 kW (or 22 kW if you have the optional upgrade). The EQS has a huge 118 kWh battery that can take a while to warm up. Slow charging is almost always temperature, state of charge, or the charger, not a defect.

Symptoms

• DC fast charging speed well below the 200 kW maximum shown on the Hyperscreen
• AC charging stuck at 3-4 kW instead of 11 kW or 22 kW
• Charging speed drops sharply after reaching 50-60% state of charge
• Charging session starts at reasonable speed but slows within minutes
• The 118 kWh battery takes significantly longer to charge than expected

What to Do

1. 1

   Route to the charger using MBUX navigation

   Enter the charging station as your destination on the Hyperscreen or MBUX. This activates automatic battery preconditioning for the 118 kWh pack. The EQS will display a preconditioning notification. Given the large battery, start routing at least 20-30 minutes before arrival for maximum benefit in cold weather.

2. 2

   Check your state of charge before expecting peak speed

   The EQS reaches 200 kW only at lower state of charge levels. For the fastest DC charging, arrive between 10-20%. If you are above 60%, the speed reduction is normal. With 580 km of range, you often do not need to charge above 80% on road trips.

3. 3

   Verify the charger can deliver the speed you expect

   Check the charger's rated output on the unit itself or in the charging app. A 50 kW charger will never give your EQS more than 50 kW. Look for chargers rated 150 kW or higher to take advantage of the EQS's capabilities. Avoid stalls paired with another vehicle.

4. 4

   Check AC charging settings and wallbox compatibility

   Open the charging settings in MBUX. Confirm the charge current is set to maximum. If you have the optional 22 kW onboard charger, verify your wallbox is 3-phase 32A. For the standard 11 kW charger, you need at least 3-phase 16A.

5. 5

   Check if Plug & Charge negotiated the correct power

   The EQS supports Plug & Charge. Occasionally, authentication issues cause the charger to default to a lower power tier. Unplug from the right rear charge port, wait 30 seconds, and reconnect. Check MBUX for any authentication errors.

6. 6

   Try a different charger

   If the speed is still low after checking all settings, try a different charger. Some chargers degrade over time. Use MBUX navigation or the Mercedes me app to find a high-power charger (150 kW+) nearby.

Old Enel X account not working after rebrand to Enel X Way

Enel rebranded its charging network from Enel X to Enel X Way. If you had an Enel X account, it may not work in the new Enel X Way app without migration.

Symptoms

• Login credentials from the old Enel X app are rejected in Enel X Way
• The old Enel X app still works but shows outdated station information
• You have the Enel X Way app but your payment methods and history did not transfer
• Password reset emails reference 'Enel X' instead of 'Enel X Way'

How to Fix It

1. 1

   Download the Enel X Way app (not the old Enel X app)

   The old Enel X app is being phased out. Search for 'Enel X Way' specifically in the App Store or Google Play. The icon and name are different from the legacy app.

2. 2

   Try logging in with your existing Enel X credentials

   Some accounts were automatically migrated. Try your old email and password in the Enel X Way app first. If it works, your history and payment methods should transfer.

3. 3

   Reset your password if login fails

   Use the 'Forgot password' option in the Enel X Way app. The migration may have reset your credentials. Enter the same email you used for Enel X.

4. 4

   Create a new Enel X Way account if migration fails

   If your old account cannot be recovered, create a new account in the Enel X Way app. You will lose your charging history but can start fresh with a working account.

5. 5

   Contact support for billing continuity

   If you had a subscription or prepaid balance on Enel X, contact Enel X Way support to have it transferred. Do not assume it carried over automatically.

Contactless payment terminal hard to reach

At some Enel X Way stations, the contactless payment terminal is positioned awkwardly, too high, at a strange angle, or behind a panel that is not obvious. This makes tapping your card difficult.

Symptoms

• You cannot find the contactless reader on the charger
• The reader is positioned above head height or behind a flap
• Your card tap does not register because the angle is wrong
• The contactless symbol is visible but the reader does not seem to respond

How to Fix It

1. 1

   Look for the contactless symbol on all sides of the charger

   Enel X Way chargers place the payment terminal in different positions depending on the hardware model. Check the front, sides, and any panels or flaps on the charger cabinet.

2. 2

   Hold your card flat against the reader for 3 to 5 seconds

   The reader may be recessed or behind a thick panel. A quick tap might not register. Hold your card steady and flat against the symbol area.

3. 3

   Try your phone's digital wallet

   If the reader is hard to reach with a physical card, try Apple Pay or Google Pay on your phone. The NFC range on a phone can be slightly better at odd angles.

4. 4

   Use the Enel X Way app instead

   If the contactless terminal is genuinely inaccessible or not responding, start the session through the Enel X Way app. The app bypasses the physical reader entirely.

Charger placed in tight parking spots

Some Enel X Way stations are installed in existing parking structures or small lots where the charging spots are narrow. Maneuvering a larger EV into position and accessing the cable can be difficult.

Symptoms

• Charging spot is too narrow to open your car door fully
• Cable does not reach your vehicle's charging port because of the parking angle
• Other parked cars block access to the charger
• You have to reverse in at a specific angle to make the cable reach

How to Fix It

1. 1

   Check your vehicle's charging port location

   Before pulling in, note which side your charging port is on (front left, rear right, etc.) and position your car so the port faces the charger. This avoids stretching the cable across the car.

2. 2

   Try reversing in if the port is at the rear

   If your charging port is at the rear of the vehicle, reversing into the spot often gives you a shorter cable run and more room to connect.

3. 3

   Check adjacent spots before plugging in

   If two chargers are side by side and one has more room, use the more accessible one even if it means a slightly longer walk.

4. 4

   Leave your car door ajar while connecting

   Plug in the cable, then close your door and start the session from inside or via the app. You do not need to stand next to the charger for the entire session.

Power fluctuations or reduced charging speed

Some Enel X Way locations experience power fluctuations, especially during peak grid demand. Your charging speed may drop unexpectedly or fluctuate throughout the session.

Symptoms

• Charging speed starts high but drops significantly after a few minutes
• Speed fluctuates between 50 and 200 kW without stabilizing
• The charger delivers well below its advertised maximum
• Speed is lower in the evening than during daytime at the same station

How to Fix It

1. 1

   Check your battery level and temperature

   Most speed drops are caused by your vehicle, not the charger. Above 60 to 80% state of charge, your vehicle reduces its charging speed to protect the battery. Cold batteries also charge more slowly.

2. 2

   Check if other chargers at the station are in use

   Some Enel X Way stations share a power connection. If multiple chargers are active, the available power is split. Try charging when fewer vehicles are plugged in.

3. 3

   Try a different time of day

   Grid demand peaks in the early evening. If you notice slower speeds at certain hours, try charging during off-peak times (late evening or early morning) when the grid is less loaded.

4. 4

   Try a different charger unit

   An individual charger may have a hardware limitation. Another unit at the same station might deliver higher power.

5. 5

   Report persistent low speeds

   If a station consistently delivers far below its rated power, report it in the Enel X Way app. This helps their maintenance team investigate whether it is a hardware or grid supply issue.

App shows incorrect real-time availability

The Enel X Way app sometimes displays charger availability that does not match reality. You arrive expecting a free charger and find it occupied, or the app shows a charger as faulted when it actually works.

Symptoms

• App shows 'Available' but the charger is occupied when you arrive
• App shows 'Out of order' but the charger works fine
• Availability status does not change even after refreshing
• You planned your route based on app availability and found no working chargers

How to Fix It

1. 1

   Refresh the station page and check timestamps

   Pull down to refresh the station detail view. If the status was last updated more than 10 minutes ago, it may be stale.

2. 2

   Try plugging in regardless of the app status

   If the charger looks physically operational (lights on, screen active, no maintenance stickers), try plugging in and starting a session. The app status may simply be lagging.

3. 3

   Cross-check with another app

   Open Chargemap, Google Maps, or another charging app that shows Enel X Way stations. A different data source might have more current availability information.

4. 4

   Always have a backup station identified

   Do not rely on a single station, especially for long trips. Identify 1 or 2 alternative stations nearby before setting out, in case availability data is wrong.