Mercedes-Benz EQC Charging at Atlante

Mercedes-Benz EQC Charger Won't Start: Quick Fixes

You have plugged your Mercedes-Benz EQC into a public charger, but nothing is happening. No charging animation on MBUX, no power flowing, just a dead charger screen. This is one of the most common frustrations at public stations, and the fix is usually simple.

Symptoms

• The charger display shows 'connect vehicle' even though the cable is connected
• MBUX does not indicate any charging activity
• The EQC's charge port LED stays off or blinks without starting
• The charger shows an error code after plugging in
• The CCS2 plug does not click securely into the port

What to Do

1. 1

   Unlock the EQC

   Make sure the car is unlocked. The charge port only opens and accepts a connector when the EQC is unlocked.

2. 2

   Insert the connector firmly

   Push the CCS2 or Type 2 connector straight into the port until it clicks. The EQC's charge port is on the right rear side. A locked connector initiates the communication protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the network app, or use contactless payment. The charger needs this step before it will send power to the EQC.

4. 4

   Check MBUX for scheduling conflicts

   In MBUX, navigate to EV settings and check for charging schedules. If one is active, switch to immediate charging.

5. 5

   Unplug and reconnect

   Remove the cable, wait 15 seconds, and plug it back in. This resets the handshake between the EQC and the charger.

6. 6

   Move to a different charger

   If nothing works, the charger is likely faulty. Try a different stall or station and report the broken charger through the network app.

Mercedes-Benz EQC Charging Payment Rejected: Fixes

Your Mercedes-Benz EQC is plugged in and ready, but the charger will not accept your payment. RFID card ignored, app throwing errors, or bank card declined. This is not an EQC issue, but it still stops you from charging. Here is what to do.

Symptoms

• The charger displays 'authentication failed' or 'payment error'
• RFID card tap gets no response from the charger
• The charging app fails with a payment error when starting a session
• Contactless bank card is declined at the terminal
• The charger asks for payment but you have no compatible method

What to Do

1. 1

   Try a different payment method

   Switch from RFID to the app, or from the app to a contactless bank card. Most chargers support multiple payment options.

2. 2

   Verify your account status

   Open the charging app and check your payment method, balance, and subscription. Fix any expired cards or low balances.

3. 3

   Check which networks are accepted

   Look at the charger for logos of supported providers. If your provider is not there, look for a QR code for ad-hoc payment.

4. 4

   Use the QR code for direct payment

   Scan the QR code on the charger with your phone. It opens a web-based payment page where you can use any bank card without an app.

5. 5

   Cancel and retry

   If payment appeared to process but charging did not start, cancel the session in the app and authorize a new one.

6. 6

   Call the network support number

   Most chargers display a support phone number. The operator can sometimes start sessions remotely or identify payment issues.

Mercedes-Benz EQC Charging Slow: No Preconditioning

Your Mercedes-Benz EQC 400 4MATIC supports up to 112kW DC fast charging, but you are seeing much lower numbers on the MBUX display. Unlike newer Mercedes EVs, the EQC does not have battery preconditioning, which makes cold weather charging particularly slow. Here is what is happening and what you can do about it.

Symptoms

• DC charging power shown on MBUX is well below 112kW
• The 80kWh battery takes much longer to charge than expected
• Charging speed drops significantly above 70% state of charge
• AC charging is stuck at or below 11kW
• Cold weather charging is noticeably slower than in summer

What to Do

1. 1

   Check charging power in MBUX

   Open the charging status screen on MBUX. It shows current kW, battery temperature, and estimated time. This helps identify whether the car or charger is limiting speed.

2. 2

   Warm the battery through driving

   Since the EQC lacks automatic preconditioning, the best approach is to drive at motorway speeds for at least 20 to 30 minutes before arriving at a fast charger. This passively warms the battery and improves charging speed.

3. 3

   Choose chargers rated at 120kW or more

   Use the Mercedes me app or a charger map to find high-power stations. To reach the EQC's 112kW peak, the charger needs to be rated at 120kW or higher.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, pick a pair where the other stall is empty. This gives the EQC the full charger output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. The EQC charges fastest in this range.

6. 6

   Avoid charging from a cold start in winter

   If possible, do not stop for a fast charge immediately after the car has been parked overnight in freezing temperatures. Drive for a while first to let the battery warm up naturally.

New station with teething problems

Atlante is expanding rapidly, and many stations are brand new. Newly installed chargers sometimes have firmware bugs, incomplete network configuration, or hardware that has not been fully tested under real-world conditions.

Symptoms

• Charger turns on but fails to communicate with your vehicle
• Session starts but drops after a few seconds
• Charger screen shows an error code you have never seen before
• Station appears on the map but the chargers are not yet operational

How to Fix It

1. 1

   Try a different charger at the same station

   New stations often have multiple units and the issue may be limited to one charger. Try another unit before giving up on the location.

2. 2

   Unplug, wait 30 seconds, and retry

   New charger firmware sometimes fails on the first handshake but succeeds on the second attempt. A short wait lets the charger reset its session state.

3. 3

   Start the session through the Atlante app

   If the charger's screen or contactless reader is not working properly, the app provides a separate communication path to the charger's backend. This can bypass local hardware issues.

4. 4

   Check the Atlante app for station status notes

   Atlante sometimes posts notices about newly activated stations that are still in testing. The station detail page in the app may show a note about limited functionality.

5. 5

   Report the issue and move to the next station

   Use the Atlante app to report the problem. New station issues are usually fixed quickly once reported. Check the app for the nearest alternative Atlante or competitor station.

App crashes on older phones

The Atlante app can be unstable on older phones or phones running outdated operating systems. The app may crash during login, while loading the map, or in the middle of starting a session.

Symptoms

• App closes unexpectedly when you open the station map
• App freezes during the payment screen
• Login screen loads but the app crashes after entering credentials
• App works briefly but crashes when you try to start a session

How to Fix It

1. 1

   Update the Atlante app to the latest version

   Atlante pushes frequent updates that fix stability issues. Open the App Store or Google Play and check for updates before your trip.

2. 2

   Clear the app cache

   On Android, go to Settings, Apps, Atlante, and clear the cache. On iPhone, delete and reinstall the app. Corrupted cache data is a common cause of crashes.

3. 3

   Check your phone's operating system version

   The Atlante app may require iOS 15+ or Android 10+. If your phone is on an older version, update if possible. If your phone cannot update, you may need a roaming app as a backup.

4. 4

   Use contactless payment as a fallback

   If the app keeps crashing and the station supports contactless, tap your credit or debit card on the charger's payment terminal. Not all Atlante stations have this yet, but it completely bypasses the app.

5. 5

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Electropass can start sessions at Atlante stations without using the Atlante app. Check roaming coverage before relying on this.

Contactless payment terminal not activated

Atlante is rolling out contactless card payment across its network, but not every charger has an active terminal yet. Some units have the hardware installed but the payment function is not turned on.

Symptoms

• Card reader is visible on the charger but does not respond to a tap
• Screen says 'Use app to start' with no contactless option shown
• Contactless symbol is printed on the charger but the reader light is off
• You see a payment terminal but tapping produces no response

How to Fix It

1. 1

   Download and use the Atlante app

   At stations where contactless is not yet active, the Atlante app is the primary payment method. Download it before your trip and add a payment card in advance.

2. 2

   Check the charger screen for payment instructions

   Some Atlante chargers display which payment methods are currently available. If contactless is not listed, the terminal is not active at that unit.

3. 3

   Try a different charger at the same station

   Contactless activation sometimes rolls out unit by unit. Another charger at the same station may have an active terminal.

4. 4

   Use a roaming RFID card or app

   If you have an RFID card from a roaming provider, try tapping it. Some Atlante stations accept roaming RFID even when the contactless card terminal is not active.

Charger screen hard to read in direct sunlight

Some Atlante charger screens have low brightness levels that make them nearly impossible to read in bright sunlight. This is especially common at stations in Southern Europe during summer.

Symptoms

• Screen content is barely visible outdoors during the day
• You cannot read the price, status, or error messages on the screen
• Screen appears to be off but the charger is actually on
• You have to cup your hands around the screen to read it

How to Fix It

1. 1

   Use your body or hand to shade the screen

   Stand to block direct sunlight from hitting the screen. Even partial shade can make the display readable.

2. 2

   Take a photo of the screen with your phone

   Your phone camera can sometimes capture what your eyes cannot. Take a photo and zoom in to read the text.

3. 3

   Use the Atlante app to monitor your session

   All session information (charging speed, energy delivered, cost, estimated time) is available in the app. You do not need the charger screen to track your session.

4. 4

   Start the session entirely through the app

   If you cannot read the screen at all, use the Atlante app to select the charger, start the session, and stop it when done. This avoids needing to interact with the screen.

Cable connector requires specific angle to lock

Some Atlante charger cables need to be inserted at a particular angle or with extra force for the CCS2 connector to seat properly. If it is not fully locked, the session will not start.

Symptoms

• Connector feels like it is in but the charger does not recognize it
• Charger screen says 'Connect cable' even though the cable is plugged in
• You hear a partial click but the connector is not locked
• Connector slides back out after you let go

How to Fix It

1. 1

   Push the connector straight in, then slightly upward

   Some Atlante CCS2 connectors need a slight upward tilt after the initial push to engage the locking mechanism. You should feel and hear a solid click.

2. 2

   Check for debris in the vehicle's charging port

   Dust, ice, or a small pebble in the port can prevent the connector from seating fully. Inspect the port and brush out anything you find.

3. 3

   Make sure the vehicle is unlocked and ready to charge

   Some vehicles lock the charging port flap or disable the inlet when the car is locked or in drive mode. Ensure the car is in park and unlocked.

4. 4

   Try a different cable if the charger has two

   If the charger has two CCS2 cables, try the other one. One cable may have a slightly worn connector that does not seat as easily.