Mercedes-Benz EQC Charging at Ionity

Mercedes-Benz EQC Charger Won't Start: Quick Fixes

You have plugged your Mercedes-Benz EQC into a public charger, but nothing is happening. No charging animation on MBUX, no power flowing, just a dead charger screen. This is one of the most common frustrations at public stations, and the fix is usually simple.

Symptoms

• The charger display shows 'connect vehicle' even though the cable is connected
• MBUX does not indicate any charging activity
• The EQC's charge port LED stays off or blinks without starting
• The charger shows an error code after plugging in
• The CCS2 plug does not click securely into the port

What to Do

1. 1

   Unlock the EQC

   Make sure the car is unlocked. The charge port only opens and accepts a connector when the EQC is unlocked.

2. 2

   Insert the connector firmly

   Push the CCS2 or Type 2 connector straight into the port until it clicks. The EQC's charge port is on the right rear side. A locked connector initiates the communication protocol.

3. 3

   Start the session at the charger

   Tap your RFID card, open the network app, or use contactless payment. The charger needs this step before it will send power to the EQC.

4. 4

   Check MBUX for scheduling conflicts

   In MBUX, navigate to EV settings and check for charging schedules. If one is active, switch to immediate charging.

5. 5

   Unplug and reconnect

   Remove the cable, wait 15 seconds, and plug it back in. This resets the handshake between the EQC and the charger.

6. 6

   Move to a different charger

   If nothing works, the charger is likely faulty. Try a different stall or station and report the broken charger through the network app.

Mercedes-Benz EQC Charging Payment Rejected: Fixes

Your Mercedes-Benz EQC is plugged in and ready, but the charger will not accept your payment. RFID card ignored, app throwing errors, or bank card declined. This is not an EQC issue, but it still stops you from charging. Here is what to do.

Symptoms

• The charger displays 'authentication failed' or 'payment error'
• RFID card tap gets no response from the charger
• The charging app fails with a payment error when starting a session
• Contactless bank card is declined at the terminal
• The charger asks for payment but you have no compatible method

What to Do

1. 1

   Try a different payment method

   Switch from RFID to the app, or from the app to a contactless bank card. Most chargers support multiple payment options.

2. 2

   Verify your account status

   Open the charging app and check your payment method, balance, and subscription. Fix any expired cards or low balances.

3. 3

   Check which networks are accepted

   Look at the charger for logos of supported providers. If your provider is not there, look for a QR code for ad-hoc payment.

4. 4

   Use the QR code for direct payment

   Scan the QR code on the charger with your phone. It opens a web-based payment page where you can use any bank card without an app.

5. 5

   Cancel and retry

   If payment appeared to process but charging did not start, cancel the session in the app and authorize a new one.

6. 6

   Call the network support number

   Most chargers display a support phone number. The operator can sometimes start sessions remotely or identify payment issues.

Mercedes-Benz EQC Charging Slow: No Preconditioning

Your Mercedes-Benz EQC 400 4MATIC supports up to 112kW DC fast charging, but you are seeing much lower numbers on the MBUX display. Unlike newer Mercedes EVs, the EQC does not have battery preconditioning, which makes cold weather charging particularly slow. Here is what is happening and what you can do about it.

Symptoms

• DC charging power shown on MBUX is well below 112kW
• The 80kWh battery takes much longer to charge than expected
• Charging speed drops significantly above 70% state of charge
• AC charging is stuck at or below 11kW
• Cold weather charging is noticeably slower than in summer

What to Do

1. 1

   Check charging power in MBUX

   Open the charging status screen on MBUX. It shows current kW, battery temperature, and estimated time. This helps identify whether the car or charger is limiting speed.

2. 2

   Warm the battery through driving

   Since the EQC lacks automatic preconditioning, the best approach is to drive at motorway speeds for at least 20 to 30 minutes before arriving at a fast charger. This passively warms the battery and improves charging speed.

3. 3

   Choose chargers rated at 120kW or more

   Use the Mercedes me app or a charger map to find high-power stations. To reach the EQC's 112kW peak, the charger needs to be rated at 120kW or higher.

4. 4

   Avoid shared stalls

   At stations with paired CCS2 connectors, pick a pair where the other stall is empty. This gives the EQC the full charger output.

5. 5

   Charge between 10% and 80%

   Plan stops to arrive between 10% and 15% and leave at 80%. The EQC charges fastest in this range.

6. 6

   Avoid charging from a cold start in winter

   If possible, do not stop for a fast charge immediately after the car has been parked overnight in freezing temperatures. Drive for a while first to let the battery warm up naturally.

Session won't start after contactless payment

You tap your card, the reader beeps, but the charger never begins delivering power. This is one of the most reported issues at Ionity stations.

Symptoms

• Contactless reader shows a green light but nothing happens
• Screen says 'Initializing' for more than 60 seconds
• Card is charged a pre-authorization hold but no energy is delivered
• Error message appears after the tap but disappears too quickly to read

How to Fix It

1. 1

   Unplug the cable and wait 10 seconds

   This resets the charger's session state. Plug the cable back in firmly until you hear the locking click.

2. 2

   Try a different payment method

   Open the Ionity app and start the session from there instead. If you have an Ionity subscription, use the app. App-initiated sessions bypass the contactless reader entirely.

3. 3

   Check your card's contactless limit

   Some banks block contactless transactions above a certain amount. Ionity may pre-authorize up to 100 EUR. If your bank flags this, the session fails silently.

4. 4

   Move to another stall at the same station

   Individual charger units can have faulty card readers while the rest of the station works fine. Try the next available stall.

5. 5

   Check for a pending hold on your bank statement

   If a hold was placed but no session started, it typically releases within 3 to 7 business days. You will not be charged for energy you did not receive.

Plug & Charge pairing fails

Your vehicle supports Plug & Charge (ISO 15118) but the Ionity station does not recognize it. The charger asks for payment instead of starting automatically.

Symptoms

• Charger prompts for app or card payment instead of starting automatically
• Screen shows 'Vehicle not recognized'
• Plug & Charge worked at this station before but stopped working
• Pairing completed in the Ionity app but the station still asks for payment

How to Fix It

1. 1

   Verify Plug & Charge is enabled in your vehicle settings

   Some vehicles (like Porsche Taycan, BMW iX, Mercedes EQS) have a toggle in the infotainment system. If it was turned off during a software update, the charger cannot identify your car.

2. 2

   Re-pair your vehicle in the Ionity app

   Go to the Ionity app, navigate to Plug & Charge settings, remove the existing pairing, and set it up again. This refreshes the digital certificate.

3. 3

   Check that your Ionity subscription is active

   Plug & Charge on Ionity requires an active subscription. If your subscription lapsed, the auto-start will fail even if the pairing is intact.

4. 4

   Try unplugging and re-plugging slowly

   The ISO 15118 handshake happens in the first few seconds. If you plug in too quickly or the connector is not fully seated, the handshake times out and the charger falls back to manual payment.

5. 5

   Start the session via the app as a fallback

   Plug & Charge issues are often caused by backend certificate mismatches. You can still charge at Ionity subscription rates by starting the session through the app while the issue is resolved.

Charger screen frozen or unresponsive

The charger display is stuck on a loading screen, shows garbled text, or does not respond to touch. The hardware may still work even if the screen does not.

Symptoms

• Screen shows a logo or loading animation that never progresses
• Touch inputs on the screen do nothing
• Screen is completely black but the charger lights are on
• Screen shows an error code that does not clear

How to Fix It

1. 1

   Try plugging in and starting via the app

   The screen and the charging hardware are separate systems. Many Ionity chargers will still deliver power even with a frozen display if you initiate the session through the Ionity app.

2. 2

   Unplug completely and wait 30 seconds

   Sometimes unplugging triggers a soft reset of the charger unit. Wait, then try again.

3. 3

   Try a different stall

   Ionity stations typically have multiple charger units. A frozen screen on one unit does not affect the others.

4. 4

   Report the charger in the Ionity app

   Open the Ionity app, find the station, and report the specific charger as out of order. This helps Ionity dispatch maintenance faster.

App shows station available but charger is faulted

The Ionity app shows green (available) status for a station, but when you arrive, the chargers display errors or are physically out of service.

Symptoms

• App shows 'Available' but charger displays 'Out of Order'
• All stalls at the station are faulted despite the app showing availability
• Charger has a maintenance sticker or barrier but the app has not been updated
• You drove to a station specifically because the app said it was free

How to Fix It

1. 1

   Refresh the station status in the app

   Pull down to refresh the station view. Status updates can lag by several minutes, especially after a charger was recently reported or rebooted.

2. 2

   Check individual charger status, not just the station

   Tap into the station details in the Ionity app. Even if some stalls show faulted, others at the same station may still work.

3. 3

   Try plugging in anyway

   Occasionally a charger shows a stale error on its screen from a previous session but works fine for the next user. Plug in and attempt to start via the app.

4. 4

   Plan a backup station

   Before driving to an Ionity station, check if there is an alternative station within 10 to 15 minutes. Ionity stations along highways sometimes have another Ionity or competitor station at the next exit.

5. 5

   Report the discrepancy

   Use the 'Report a problem' option in the Ionity app. Accurate reports help Ionity fix status sync issues and prioritize maintenance.

Unexpectedly high ad-hoc price

You charged without an Ionity subscription subscription and the per-kWh price is significantly higher than you expected. Ionity's ad-hoc rate is one of the most expensive in Europe.

Symptoms

• Invoice shows 0.75 EUR/kWh or higher
• Total cost for a short session is much higher than expected
• Price displayed on the charger screen was not noticed before starting
• You assumed the price would be similar to home charging or other networks

How to Fix It

1. 1

   Check if Ionity subscription would save you money

   Ionity offers subscription plans that reduce the per-kWh price significantly. Check the Ionity app for current plans and rates. If you charge at Ionity more than once or twice a month, a subscription usually pays for itself.

2. 2

   Check your vehicle manufacturer's charging plan

   Many EV manufacturers (Hyundai, Kia, BMW, Mercedes, Volkswagen Group, Ford) offer bundled Ionity pricing through their own apps. You may already have access to a discounted rate through your car brand.

3. 3

   Look at the charger screen before starting next time

   Ionity displays the per-kWh price on the charger screen before the session starts. The ad-hoc price is always shown.

4. 4

   Consider roaming providers for occasional use

   If you do not want a subscription, some roaming apps (like Shell Recharge, Chargemap, or Maingau) offer lower Ionity rates than the ad-hoc price.

Charging speed much lower than 350 kW

The station advertises 350 kW but your vehicle is charging at a fraction of that speed. This can be normal or it can indicate a problem.

Symptoms

• Dashboard shows 50 to 100 kW at a 350 kW charger
• Charging started fast but dropped sharply after a few minutes
• Other vehicles at the same station seem to charge faster
• Speed is lower than what you normally get at Ionity

How to Fix It

1. 1

   Check your battery level

   Charging speed drops significantly above 60 to 80% state of charge on most vehicles. This is normal battery behavior, not an Ionity issue. For the fastest stop, charge from 10 to 80% and move on.

2. 2

   Check the battery temperature

   Cold batteries charge slowly. If your vehicle supports battery preconditioning, set the Ionity station as your navigation destination. The car will warm the battery on the way there.

3. 3

   Verify your vehicle's max DC charging speed

   Not all EVs can accept 350 kW. Many popular models top out at 100 to 150 kW. The charger delivers only what the vehicle requests.

4. 4

   Try a different stall

   Individual charger units can occasionally have hardware limitations or faults that reduce output. Moving to another stall at the same station can sometimes restore full speed.

5. 5

   Check for power sharing

   Some Ionity stations share power between adjacent stalls. If the neighboring stall is also in use, both vehicles may receive reduced power. Try a stall that is not next to another active session.