Mercedes-Benz EQA Charging at Lidl Charging

Mercedes-Benz EQA Charger Won't Start a Session

You connected the cable to your EQA's right rear charge port, but nothing happens. No charging animation on MBUX, no power flowing. This is one of the most frustrating situations at a public charger, but it is almost always fixable on the spot. The cause is usually authentication, cable locking, or the charger itself.

Symptoms

• CCS2 connector plugged in but MBUX shows no charging activity
• Charger screen shows an error or stays on the start screen after tapping
• Plug & Charge does not authenticate automatically at a supported station
• Charge port LED on the EQA does not turn on or blinks red
• Mercedes me app shows the car as connected but not charging

What to Do

1. 1

   Remove and reseat the CCS2 connector

   Pull the connector out of the right rear charge port. Inspect it for visible damage or debris. Push it back in firmly until you hear a click. The charge port LED should respond. If the cable feels loose or wobbly, the connector or port may be dirty.

2. 2

   Authenticate manually if Plug & Charge failed

   Open the charging network's app on your phone and start the session from there. Or tap your RFID card on the charger's reader. Plug & Charge is convenient but not universal. Many networks still require app-based or card-based authentication.

3. 3

   Check for scheduled charging in MBUX

   Open the charging settings in MBUX. If a departure time or scheduled charging window is active, disable it. At public chargers, you want charging to start immediately. Scheduled charging is designed for home use where off-peak electricity rates matter.

4. 4

   Lock and unlock the EQA, then try again

   Use the key or Mercedes me app to lock the car, wait 10 seconds, then unlock it. This resets the charge port locking mechanism and the onboard charging controller. Reconnect the cable after unlocking.

5. 5

   Try a different connector or charger

   If the station has multiple connectors, try another one. If the entire unit seems unresponsive, move to a different charger. Report the faulty charger through the network's app so other drivers know it is down.

Mercedes-Benz EQA Payment Failed at Charging Station

You are at a public charger with your EQA, but payment will not go through. The charger rejects your card, the app shows an error, or Plug & Charge just does not work. Payment problems are one of the most common reasons a charging session fails to start, and they are almost always fixable without leaving the station.

Symptoms

• Plug & Charge does not authenticate at a supported station
• Contactless bank card declined at the charger's payment terminal
• Charging app shows a payment error or insufficient balance
• RFID card not recognized by the charger's reader
• Charger starts the session but stops immediately with a billing error

What to Do

1. 1

   Try Plug & Charge first

   Simply plug the CCS2 connector into the EQA's right rear charge port. If Plug & Charge is activated in your Mercedes me account, the car and charger should authenticate automatically. Wait up to 30 seconds. If nothing happens, move to the next step.

2. 2

   Use the charging network's app

   Open the app for the specific charging network (the name is usually on the charger). Select the charger by scanning the QR code or entering the station ID. Start the session through the app. Make sure your payment method in the app is current.

3. 3

   Try contactless payment at the terminal

   Many newer chargers have a contactless payment terminal. Tap your bank card or phone (Apple Pay, Google Pay). If the terminal does not respond, it may be offline. Try a different card if you have one.

4. 4

   Check your Mercedes me Charge account

   Open the Mercedes me app and go to your Charge settings. Verify that a valid payment method is linked and that Plug & Charge is enabled. If your payment method expired recently, update it. Changes may take a few minutes to sync to the car.

5. 5

   Use a different RFID card or roaming provider

   If you have multiple charging cards, try another one. Roaming providers like Chargemap, Maingau, or Shell Recharge cover many networks across Europe. Having a second RFID card from a different provider is a reliable backup.

6. 6

   Move to a different charger or network

   If nothing works at this station, use MBUX navigation or the Mercedes me app to find another charger nearby. A different network may accept your payment method. Filter by the networks you know your cards work with.

Mercedes-Benz EQA Charging Slower Than Expected

You plugged in your EQA at a fast charger expecting close to 100 kW, but the MBUX display shows 30 kW. Or your home wallbox is delivering 3.6 kW instead of 11 kW. Slow charging on the EQA is rarely a defect. It is usually the battery temperature, your state of charge, or a setting in the Mercedes me app you can adjust quickly.

Symptoms

• DC fast charging speed well below the 100 kW maximum shown on MBUX
• AC home or destination charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops sharply after reaching 60-70% state of charge
• Charging session starts at reasonable speed then slows within minutes
• MBUX display shows significantly lower power than the charger's rated output

What to Do

1. 1

   Route to the charger using MBUX navigation

   Enter the charging station as your destination in MBUX. This activates automatic battery preconditioning, which heats the 70.5 kWh battery pack to the ideal temperature range before you arrive. You will see a notification on the display confirming preconditioning is active. The EQA's heat pump makes this efficient even in cold weather.

2. 2

   Check your state of charge before plugging in

   For the fastest DC charging on the EQA, arrive between 10-20% state of charge. The 100 kW peak is available in this lower range. If you are already above 70%, the slower speed is expected and normal. Plan your stops accordingly on longer trips.

3. 3

   Verify the charger is not sharing power

   Look at the charging unit. If it has two CCS2 cables and someone is using the other one, you may be splitting the total capacity. Move to an unoccupied charger if available. Single-connector chargers avoid this problem entirely.

4. 4

   Check charging settings in MBUX or the Mercedes me app

   Open the charging settings in MBUX or the Mercedes me app. Make sure no departure time charging is active (this delays charging to finish just before departure). Confirm the charge current is set to maximum, not reduced. A reduced setting is the most common fix for slow home AC charging.

5. 5

   Check if Plug & Charge is working correctly

   The EQA supports Plug & Charge at compatible stations. If authentication failed and the charger defaulted to a lower power tier, unplug, wait 30 seconds, and reconnect at the charge port on the right rear side. Check MBUX for any error messages about authentication.

6. 6

   Try a different charger or restart the session

   If the speed is still low, unplug, lock and unlock the car, then plug in again. If that does not help, try a different charger entirely. Some chargers cannot deliver their rated power due to grid limitations or hardware degradation.

Pricing confusion at the charger

Lidl charging policies vary by country and store. Some locations have promotional rates, while others charge standard per-kWh fees. The rules can change without much notice.

Symptoms

• Charging session costs more than expected
• Different Lidl stores seem to have different pricing
• Session stops after a time limit you did not expect
• App shows different terms than what you experienced last time

How to Fix It

1. 1

   Check the pricing terms at the specific store

   Pricing varies by location and country. Look at the signage near the charger or check the app before you start. Do not assume the same terms apply at all Lidl stores.

2. 2

   Set a timer on your phone

   If the location has a time limit, start a timer when you begin charging so you know when to return to your car.

3. 3

   Check if idle fees apply

   Some Lidl locations charge idle fees if your car remains plugged in after charging completes. Move your car promptly when the session ends.

4. 4

   Do not rely on supermarket chargers for a full charge

   Supermarket charging is best for a quick top-up while shopping. If you need to charge from low battery to 80%, plan for a dedicated fast charging station where you can stay longer without restrictions.

Charger occupied by ICE vehicles

Non-electric cars park in the EV charging spots because they are close to the store entrance. This is a persistent problem at supermarket locations.

Symptoms

• Petrol or diesel car parked in the marked EV charging bay
• Car parked so close to the charger that you cannot access the cable
• All EV spots taken by non-electric vehicles
• Shopping cart corral or delivery truck blocking access to the charger

How to Fix It

1. 1

   Check if the parking is enforced

   Some Lidl locations have clear EV-only signage with towing warnings. Others just have painted markings that are easy to ignore. If there is a parking management company sign, you can report the ICE vehicle.

2. 2

   Ask at the Lidl store

   Store staff may be willing to make an announcement. They deal with parking issues regularly and some stores have processes for this.

3. 3

   Wait or shop first

   Supermarket parking turns over quickly. A 20-minute shopping trip may be enough for the spot to clear.

4. 4

   Find the nearest alternative

   Check for another Lidl or a nearby public charger. In urban areas, there is often another option within a few minutes.

Charging power reduced during peak store hours

The charger delivers noticeably less power during busy shopping times. The station may share its electrical supply with the store itself, reducing available power for EV charging.

Symptoms

• Charging speed is significantly slower during Saturday morning or lunch rush
• Dashboard shows 30 to 50 kW at a charger rated for 150 kW
• Speed improves noticeably during quieter hours
• Two cars charging simultaneously both receive low power

How to Fix It

1. 1

   Check your battery level and temperature first

   Before blaming the charger, confirm your battery is not above 80% (where speed drops naturally) and not cold. These are the most common reasons for slow charging regardless of location.

2. 2

   Try charging during off-peak hours

   If your schedule allows, charge early morning or in the evening when the store is less busy. Power allocation to the charger may increase when store demand drops.

3. 3

   Check if another vehicle is sharing the power unit

   Some Lidl chargers share power between two connectors. If both are in use, each vehicle gets roughly half the rated power. If one car finishes, your speed may increase.

4. 4

   Accept the lower speed if you are shopping anyway

   Even at 50 kW, you gain about 50 km of range every 10 minutes. If you are shopping for 30 minutes, that is still a meaningful top-up.

App needed for troubleshooting but not normally required

Lidl chargers generally work with contactless payment or a charging card. But when something goes wrong, you may need the operator's app to diagnose the problem or start a session manually.

Symptoms

• Contactless payment failed and there is no other way to start
• Charger shows an error code you do not understand
• You want to check real-time status but the charger screen is unhelpful
• QR code on the charger leads to an app you do not have installed

How to Fix It

1. 1

   Scan the QR code on the charger

   This usually opens the operator's web interface or app store page. Lidl chargers are operated by different companies depending on the country (Compleo, Allego, E.ON, and others).

2. 2

   Note the operator name on the charger

   The charging operator is printed on the charger unit, usually near the base or on the payment terminal. Search for their app if you need to start a session or report a fault.

3. 3

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Plugsurfing often have roaming access to Lidl chargers. If the contactless reader is broken, starting through a roaming app may work.

4. 4

   Call the support number on the charger

   There is almost always a phone number on the charger unit for the operator's helpline. They can sometimes start or reset a session remotely.

Charger placement blocks adjacent parking spots

Some Lidl charger installations make it difficult to park in adjacent spots when a car is plugged in. The cable or the charger unit itself can obstruct neighboring bays.

Symptoms

• Your charging cable stretches across the next parking spot
• Parked car at the charger blocks you from entering the adjacent bay
• Cable does not reach your charge port without parking at an awkward angle
• Other shoppers complain about the cable crossing the walkway

How to Fix It

1. 1

   Park with your charge port closest to the charger

   Know which side of your car the charge port is on. If possible, pull in from the direction that puts the port nearest to the cable. This keeps the cable short and out of the way.

2. 2

   Route the cable over your car if needed

   If the cable must cross to the opposite side, drape it over the hood or roof rather than across the ground where people walk. Most DC cables are long enough for this.

3. 3

   Use the spot that causes the least obstruction

   If multiple charging spots are available, choose the one where your charge port alignment minimizes cable stretch across other bays.

4. 4

   Be mindful of the time limit

   Do not leave your car plugged in longer than necessary. In a tight parking lot, a plugged-in car blocking adjacent spots is more frustrating than one that is simply parked.