Honda e:Ny1 Charging at EnergyVision

Honda e Ny1 Charger Will Not Start a Charging Session

You have connected the charger to your Honda e:Ny1, but the session is not starting. The screen is blank, there is an error, or the car just does not respond. As Honda's first mass-market European EV, the e:Ny1 uses standard connectors but has a few quirks worth knowing.

Symptoms

• The CCS2 or Type 2 connector is plugged in but no charging begins
• The Honda e:Ny1's instrument cluster does not show a charging indicator
• The charger screen shows an error code after plug-in
• You hear the connector lock engage but power does not flow
• The charging app shows the session failed to start

What to Do

1. 1

   Authenticate before plugging in

   Tap your RFID card or start the session in the charging app before inserting the connector. Wait for the charger screen to show 'ready' or 'plug in now.'

2. 2

   Unplug and firmly reinsert

   Remove the connector completely from the e:Ny1's charge port on the front right. Wait 10 seconds, then reinsert it firmly until you hear the locking click.

3. 3

   Check for a charging timer

   On the Honda e:Ny1's dashboard, navigate to the charging settings and check if a timer is active. Disable it if you need to charge immediately.

4. 4

   Reset the car's charging system

   Turn the car off, lock it with the key fob, wait 30 seconds, then unlock and try again. This can clear any error state from a previously interrupted session.

5. 5

   Inspect the charge port

   Check the charge port for moisture, dirt, or debris. Clean it gently with a dry cloth if needed. Make sure the port flap opens fully.

6. 6

   Try a different charger

   If the charger still will not start after trying all steps, move to a different unit. The charger is more likely to be the problem than the car.

Honda e Ny1 Payment Not Working at Charging Station

You are at a charger with your Honda e:Ny1 and the payment is not going through. Card declined, app not working, RFID not recognized. This has nothing to do with your car. It is a charger and payment network problem. Here is how to get past it.

Symptoms

• RFID card tap produces no response from the charger
• Charging app shows a payment authorization error
• Bank card is declined at the charger terminal
• Charger screen shows 'payment failed' or a generic error
• You cannot find any accepted payment method on the charger

What to Do

1. 1

   Check which payments the charger accepts

   Look at the charger screen and stickers for accepted payment methods. If none of your options are listed, you need to move to a different charger or sign up for that network.

2. 2

   Try a different payment method

   Switch between RFID card, charging app, and contactless bank card. If one method fails, another may work on the same charger.

3. 3

   Verify your card balance

   Open your banking app and check that you have at least 80 EUR available. Top up or switch to a card with more available balance if needed.

4. 4

   Hold the RFID card steadily for 3 seconds

   Place the card flat on the reader and hold it without moving. Some readers are slow and need a longer contact time to register.

5. 5

   Update your charging app payment details

   Open each charging app you use and check that the stored payment method is current. Update any expired cards.

6. 6

   Move to another charger unit

   If nothing works on this charger, try the next unit at the same station. Individual card readers fail while other units work fine.

Honda e Ny1 Charging Slower Than Expected DC and AC

You plugged in your Honda e:Ny1 expecting fast charging, but the speed is disappointing. The e:Ny1 tops out at 78 kW DC, which is slower than many competitors. Without preconditioning or a heat pump, cold weather makes it worse. Here is what is happening and what you can do.

Symptoms

• DC fast charging well below the 78 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops significantly after 50% state of charge
• Cold weather charging is extremely slow
• Charging from 10% to 80% takes much longer than expected

What to Do

1. 1

   Drive before charging in cold weather

   Since the e:Ny1 has no preconditioning, drive for 20-30 minutes before stopping at a DC charger in winter. The driving warms the battery through use, which improves charging acceptance.

2. 2

   Check your state of charge

   For the best speeds, arrive at the charger between 10-20% and charge to 80%. The e:Ny1's peak power is available mainly below 50%.

3. 3

   Choose a charger rated above 100 kW

   Even though the e:Ny1 maxes out at 78 kW, using a higher-rated charger ensures you are not bottlenecked by the charger. Avoid 50 kW units when faster options are available.

4. 4

   Verify your AC installation

   For home charging, confirm with your electrician that your wallbox is wired for three-phase at 16A to deliver the full 11 kW. Single-phase installations will be about a third of that speed.

5. 5

   Check if the charger is sharing power

   Look at the charger. If two cables come from the same unit and someone is using the other one, you may be sharing power. Move to a solo charger if possible.

6. 6

   Try a different charger

   If your speed is still well below 60-70 kW at a low state of charge and warm battery, the charger may be degraded. Test a different unit.

Session won't start or authentication fails

You try to start a session through the EnergyVision app or charge card, but the charger does not respond or shows an error.

Symptoms

• The app will not connect to the charger or keeps loading
• Your RFID charge card is not recognized
• You have no mobile data at the station location
• The charger screen shows an error after authentication

How to Fix It

1. 1

   Install and set up the EnergyVision app before you travel

   Create your account and add a payment method at home, on a reliable internet connection. Do not try to set up the app for the first time at a station with weak signal.

2. 2

   Try a different authentication method

   If the app is not working, try your EnergyVision charge card (RFID) instead, or vice versa. Having both options available increases your chances of starting a session.

3. 3

   Try switching between Wi-Fi and mobile data

   Some apps struggle with certain network configurations. Toggle your phone's Wi-Fi off (or on, if a nearby network is available) and try again. Sometimes a network switch forces the app to reconnect.

4. 4

   Restart the app and your phone

   Close the app completely (not just minimize), reopen it, and try again. If that fails, restart your phone.

5. 5

   Have a backup charging app ready

   Always carry a second charging app from a larger network. If EnergyVision is not working, you need to find an alternative charger from another operator.

Limited station coverage

EnergyVision has fewer stations than major networks. This means longer distances between chargers and fewer alternatives if a station is broken or occupied.

Symptoms

• The app shows very few stations along your route
• The nearest EnergyVision station is 50 km or more away
• You arrived at the only EnergyVision station in the area and it is out of order
• There is no second EnergyVision charger to fall back to

How to Fix It

1. 1

   Never rely on EnergyVision as your only charging option

   Plan your route with at least one alternative network at each stop. EnergyVision stations are a bonus when they work, but their spacing means you cannot depend on them exclusively.

2. 2

   Install apps for larger networks in the same region

   Identify which major networks operate near EnergyVision stations (Ionity, Shell Recharge, Fastned, or regional operators). Install their apps so you can switch quickly if needed.

3. 3

   Use a multi-network route planner

   A Better Routeplanner (ABRP) or similar tools show chargers from all operators. Plan your stops based on all available chargers, not just one network. EnergyVision stations will appear where they exist.

4. 4

   Charge a little extra at reliable stations before entering sparse areas

   If your next stop is an EnergyVision station in an area with few alternatives, charge to 90% at the station before it instead of the usual 80%. The extra buffer gives you range to reach a different charger if the EnergyVision station is down.

Different charger hardware at different locations

EnergyVision uses charger units from different manufacturers at different stations. This means the physical interface, cable handling, and screen layout vary from one station to the next.

Symptoms

• The charger at this station looks completely different from the last EnergyVision station you used
• The connector release mechanism works differently than expected
• The charger screen layout does not match what you see in the app
• Error codes or messages are in a different format than at other EnergyVision stations

How to Fix It

1. 1

   Check the charger unit for basic instructions

   Most charger manufacturers print basic instructions on the unit itself: where to plug in, how to release the connector, and where the emergency stop button is. Take a moment to read these, as they vary between manufacturers.

2. 2

   Start the session through the app, not the charger screen

   Regardless of the charger hardware, the EnergyVision app is the consistent interface. Start and stop sessions through the app. The charger screen is secondary.

3. 3

   If the connector release is different, check for a button or lever

   Some charger manufacturers use a push-button release, others use a lever, and some release automatically when the session ends. Look at the connector handle and the charger unit for release instructions.

4. 4

   Report hardware-specific problems in the app

   If a charger unit from a specific manufacturer is repeatedly problematic, report it through the EnergyVision app. Include details about what happened so the support team can pass it to the hardware vendor.

App not available in all app stores or regions

Smaller networks sometimes have app availability issues. The EnergyVision app may not appear in your app store if your account is set to a country where EnergyVision does not operate.

Symptoms

• You search for 'EnergyVision' in your app store and no results appear
• The app is listed but marked as 'not available in your country'
• You found the app but it will not install on your phone model
• A link to the app store listing leads to a 'not found' page

How to Fix It

1. 1

   Check the EnergyVision website for the correct app name and link

   The app may be listed under a slightly different name in some app stores. Visit the EnergyVision website on your phone and look for a direct download link that opens the correct store listing.

2. 2

   Check your app store country setting

   If your App Store or Google Play account is set to a country where EnergyVision does not operate, the app may be hidden. You can check this in your store account settings.

3. 3

   Check if a roaming app supports EnergyVision stations

   Some roaming platforms include smaller networks. Search for the station location in a roaming app (like Chargemap or Octopus Electroverse) to see if you can start a session through a third-party app instead.

4. 4

   Contact EnergyVision support for alternative access

   If you cannot install the app, contact EnergyVision through their website. They may have a web-based session starter or be able to suggest a roaming provider that includes their stations.

Slower support response times

As a smaller operator, EnergyVision may have fewer support staff than major networks. Response times for non-urgent issues can be longer, and phone support may have limited hours.

Symptoms

• You reported an issue through the app and have not heard back
• The support phone number goes to voicemail or has limited hours
• You need help at a station but cannot reach anyone
• Your email to support has not been answered after several days

How to Fix It

1. 1

   Use the app's support feature for the fastest response

   In-app support requests typically get prioritized over emails sent to a general address. If the app has a help, chat, or report issue option, use that first.

2. 2

   Include all relevant details in your first message

   To avoid back-and-forth that stretches across days, include: station location, charger ID (printed on the unit), time of the issue, what happened, and any error messages. Screenshots help.

3. 3

   Do not wait at a broken charger for support to respond

   If a charger is not working and support is not answering, move on. Report the issue through the app and drive to the next available charger from any network. Waiting at a broken charger hoping for a callback is not practical.

4. 4

   For billing disputes, document everything

   Screenshot your charging session details (from the app), note the charger ID and time, and save any error messages. If you were charged for a failed session, this documentation helps you get a refund when support responds.