Honda e:Ny1 Charging at Recharge

Honda e Ny1 Charger Will Not Start a Charging Session

You have connected the charger to your Honda e:Ny1, but the session is not starting. The screen is blank, there is an error, or the car just does not respond. As Honda's first mass-market European EV, the e:Ny1 uses standard connectors but has a few quirks worth knowing.

Symptoms

• The CCS2 or Type 2 connector is plugged in but no charging begins
• The Honda e:Ny1's instrument cluster does not show a charging indicator
• The charger screen shows an error code after plug-in
• You hear the connector lock engage but power does not flow
• The charging app shows the session failed to start

What to Do

1. 1

   Authenticate before plugging in

   Tap your RFID card or start the session in the charging app before inserting the connector. Wait for the charger screen to show 'ready' or 'plug in now.'

2. 2

   Unplug and firmly reinsert

   Remove the connector completely from the e:Ny1's charge port on the front right. Wait 10 seconds, then reinsert it firmly until you hear the locking click.

3. 3

   Check for a charging timer

   On the Honda e:Ny1's dashboard, navigate to the charging settings and check if a timer is active. Disable it if you need to charge immediately.

4. 4

   Reset the car's charging system

   Turn the car off, lock it with the key fob, wait 30 seconds, then unlock and try again. This can clear any error state from a previously interrupted session.

5. 5

   Inspect the charge port

   Check the charge port for moisture, dirt, or debris. Clean it gently with a dry cloth if needed. Make sure the port flap opens fully.

6. 6

   Try a different charger

   If the charger still will not start after trying all steps, move to a different unit. The charger is more likely to be the problem than the car.

Honda e Ny1 Payment Not Working at Charging Station

You are at a charger with your Honda e:Ny1 and the payment is not going through. Card declined, app not working, RFID not recognized. This has nothing to do with your car. It is a charger and payment network problem. Here is how to get past it.

Symptoms

• RFID card tap produces no response from the charger
• Charging app shows a payment authorization error
• Bank card is declined at the charger terminal
• Charger screen shows 'payment failed' or a generic error
• You cannot find any accepted payment method on the charger

What to Do

1. 1

   Check which payments the charger accepts

   Look at the charger screen and stickers for accepted payment methods. If none of your options are listed, you need to move to a different charger or sign up for that network.

2. 2

   Try a different payment method

   Switch between RFID card, charging app, and contactless bank card. If one method fails, another may work on the same charger.

3. 3

   Verify your card balance

   Open your banking app and check that you have at least 80 EUR available. Top up or switch to a card with more available balance if needed.

4. 4

   Hold the RFID card steadily for 3 seconds

   Place the card flat on the reader and hold it without moving. Some readers are slow and need a longer contact time to register.

5. 5

   Update your charging app payment details

   Open each charging app you use and check that the stored payment method is current. Update any expired cards.

6. 6

   Move to another charger unit

   If nothing works on this charger, try the next unit at the same station. Individual card readers fail while other units work fine.

Honda e Ny1 Charging Slower Than Expected DC and AC

You plugged in your Honda e:Ny1 expecting fast charging, but the speed is disappointing. The e:Ny1 tops out at 78 kW DC, which is slower than many competitors. Without preconditioning or a heat pump, cold weather makes it worse. Here is what is happening and what you can do.

Symptoms

• DC fast charging well below the 78 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops significantly after 50% state of charge
• Cold weather charging is extremely slow
• Charging from 10% to 80% takes much longer than expected

What to Do

1. 1

   Drive before charging in cold weather

   Since the e:Ny1 has no preconditioning, drive for 20-30 minutes before stopping at a DC charger in winter. The driving warms the battery through use, which improves charging acceptance.

2. 2

   Check your state of charge

   For the best speeds, arrive at the charger between 10-20% and charge to 80%. The e:Ny1's peak power is available mainly below 50%.

3. 3

   Choose a charger rated above 100 kW

   Even though the e:Ny1 maxes out at 78 kW, using a higher-rated charger ensures you are not bottlenecked by the charger. Avoid 50 kW units when faster options are available.

4. 4

   Verify your AC installation

   For home charging, confirm with your electrician that your wallbox is wired for three-phase at 16A to deliver the full 11 kW. Single-phase installations will be about a third of that speed.

5. 5

   Check if the charger is sharing power

   Look at the charger. If two cables come from the same unit and someone is using the other one, you may be sharing power. Move to a solo charger if possible.

6. 6

   Try a different charger

   If your speed is still well below 60-70 kW at a low state of charge and warm battery, the charger may be degraded. Test a different unit.

Charger stuck in "preparing" state

You authenticated successfully, the charger says "preparing," but it never starts delivering power. This is one of the most reported issues on Recharge stations, especially at older units.

Symptoms

• Charger screen shows "Preparing" or "Initializing" for more than two minutes
• Your car's charging indicator does not activate
• The Recharge app shows the session as active but 0 kW delivered
• The charger fan spins up but no power flows

How to Fix It

1. 1

   Wait up to three minutes

   Some Recharge units, particularly the 300kW stations, take longer to complete the power handshake with your car. Give it a full three minutes before taking action.

2. 2

   Unplug and reconnect

   Remove the CCS2 connector, wait 15 seconds, then plug it back in firmly. This resets the communication between your car and the charger.

3. 3

   Stop the session in the Recharge app and start a new one

   Open the Recharge app, tap Stop on the active session, wait for it to fully end, then start a new session on the same charger. This clears any stuck state on the backend.

4. 4

   Try the other connector on the same unit

   Many Recharge stations have two CCS2 connectors. If one is stuck, the other connector on the same unit often works fine.

5. 5

   Use a different authentication method

   If you started with the app, try your RFID card instead, or vice versa. Sometimes the issue is with the authentication path, not the charger hardware.

Old Fortum branding causes app scan failure

Recharge was originally part of Fortum's charging operations before being spun off as a separate company. Some older stations still display Fortum logos and QR codes. Scanning an old Fortum QR code with the Recharge app may not work, or it may redirect to a dead Fortum page.

Symptoms

• QR code on the charger opens a Fortum website or shows an error
• Recharge app says "Charger not found" after scanning
• Station ID on the physical unit does not match what the Recharge app expects
• The charger has Fortum branding but is listed as Recharge in third-party apps

How to Fix It

1. 1

   Ignore the QR code and search by station name in the Recharge app

   Open the Recharge app, use the map or search to find the station by location. The charger will appear under its Recharge name even if the physical unit still says Fortum.

2. 2

   Enter the charger ID manually

   Look for a numeric ID on the charger, often printed on a sticker near the connector. In the Recharge app, tap "Enter ID" and type it in directly.

3. 3

   Use RFID or contactless payment instead of the app

   Tap your Recharge RFID card or a contactless bank card on the reader. This bypasses the app entirely and works regardless of the branding on the charger.

4. 4

   Check if contactless is available on this unit

   Not all Recharge stations support contactless bank card payment. Look for a card reader terminal on the charger. If there is no terminal, you will need the app or an RFID card.

RFID card from old Fortum account not recognized

If you had a Fortum Charge & Drive account and RFID card, it may not work automatically on the Recharge network. Some cards were migrated, others were not.

Symptoms

• Tapping your old Fortum RFID card shows "Card not recognized" on the charger
• The charger beeps but does not start a session
• Your Fortum card works on some stations but not others

How to Fix It

1. 1

   Log in to the Recharge app and check your RFID cards

   Open the Recharge app, go to your account settings, and look under RFID cards. If your old Fortum card is not listed, it was not migrated automatically.

2. 2

   Re-register your RFID card

   In the Recharge app, tap "Add RFID card" and follow the steps. You will need the card number printed on the back of your RFID card.

3. 3

   Use the app to start the session while you wait for RFID activation

   RFID card registration can take up to 24 hours to propagate across all stations. Use the app to authenticate in the meantime.

4. 4

   Order a new Recharge RFID card if re-registration fails

   Some older Fortum cards use a chip format that is not compatible. You can order a new Recharge RFID card through the app or website.

Contactless payment not accepted

You are trying to tap your bank card or phone to pay, but the charger does not respond or shows an error. Contactless payment availability varies across Recharge stations.

Symptoms

• No card reader terminal visible on the charger
• Card reader shows "Payment failed" or does not respond to taps
• Apple Pay or Google Pay not recognized
• The charger prompts for an RFID card but you only have a bank card

How to Fix It

1. 1

   Check if this station supports contactless payment

   Look for a separate payment terminal with a contactless symbol. Not all Recharge stations have been upgraded. The Recharge app shows payment options for each station on the station detail page.

2. 2

   Try removing and re-holding your card

   Hold your card flat against the reader for at least three seconds. Some terminals need a longer hold than you might expect. Remove the card fully, then try again.

3. 3

   Fall back to the Recharge app

   If contactless is not working, open the Recharge app and start the session from there. You need a payment method saved in the app.

4. 4

   Try a different card

   Some Visa Electron and certain prepaid cards are not accepted by the payment terminals. A standard Visa or Mastercard debit or credit card usually works.

Charging speed much lower than expected

The station is rated for 300kW, but your car is only pulling 50kW or less. While your car's battery management limits the maximum speed, Recharge stations can also throttle power.

Symptoms

• Charger display shows far less power than the station's rated capacity
• Charging speed drops suddenly mid-session
• Other cars at the same station are also charging slowly
• The Recharge app shows the session but at low power

How to Fix It

1. 1

   Check how many other cars are charging at the same station

   Recharge stations with multiple connectors often share a power cabinet. If two or three cars are charging simultaneously, the available power per car drops. This is normal and not a fault.

2. 2

   Check your battery level

   DC fast charging slows significantly above 80% on most EVs. If your battery is above 70-80%, the slower speed is your car protecting the battery, not a problem with the Recharge station.

3. 3

   Check the temperature

   In cold weather, your car may limit charging speed until the battery warms up. This can take 10-15 minutes of charging before speeds increase. Some cars precondition the battery if you set the charger as a destination in navigation.

4. 4

   Try a different connector at the station

   Individual connectors can have faults that limit power output. If another connector is free, unplug and try it.

5. 5

   Report the issue in the Recharge app

   If the speed is unusually low and none of the above apply, report it through the Recharge app. Tap the active session and look for a "Report issue" option. This helps Recharge identify hardware problems.