Honda e:Ny1 Charging at ABC-lataus

Honda e Ny1 Charger Will Not Start a Charging Session

You have connected the charger to your Honda e:Ny1, but the session is not starting. The screen is blank, there is an error, or the car just does not respond. As Honda's first mass-market European EV, the e:Ny1 uses standard connectors but has a few quirks worth knowing.

Symptoms

• The CCS2 or Type 2 connector is plugged in but no charging begins
• The Honda e:Ny1's instrument cluster does not show a charging indicator
• The charger screen shows an error code after plug-in
• You hear the connector lock engage but power does not flow
• The charging app shows the session failed to start

What to Do

1. 1

   Authenticate before plugging in

   Tap your RFID card or start the session in the charging app before inserting the connector. Wait for the charger screen to show 'ready' or 'plug in now.'

2. 2

   Unplug and firmly reinsert

   Remove the connector completely from the e:Ny1's charge port on the front right. Wait 10 seconds, then reinsert it firmly until you hear the locking click.

3. 3

   Check for a charging timer

   On the Honda e:Ny1's dashboard, navigate to the charging settings and check if a timer is active. Disable it if you need to charge immediately.

4. 4

   Reset the car's charging system

   Turn the car off, lock it with the key fob, wait 30 seconds, then unlock and try again. This can clear any error state from a previously interrupted session.

5. 5

   Inspect the charge port

   Check the charge port for moisture, dirt, or debris. Clean it gently with a dry cloth if needed. Make sure the port flap opens fully.

6. 6

   Try a different charger

   If the charger still will not start after trying all steps, move to a different unit. The charger is more likely to be the problem than the car.

Honda e Ny1 Payment Not Working at Charging Station

You are at a charger with your Honda e:Ny1 and the payment is not going through. Card declined, app not working, RFID not recognized. This has nothing to do with your car. It is a charger and payment network problem. Here is how to get past it.

Symptoms

• RFID card tap produces no response from the charger
• Charging app shows a payment authorization error
• Bank card is declined at the charger terminal
• Charger screen shows 'payment failed' or a generic error
• You cannot find any accepted payment method on the charger

What to Do

1. 1

   Check which payments the charger accepts

   Look at the charger screen and stickers for accepted payment methods. If none of your options are listed, you need to move to a different charger or sign up for that network.

2. 2

   Try a different payment method

   Switch between RFID card, charging app, and contactless bank card. If one method fails, another may work on the same charger.

3. 3

   Verify your card balance

   Open your banking app and check that you have at least 80 EUR available. Top up or switch to a card with more available balance if needed.

4. 4

   Hold the RFID card steadily for 3 seconds

   Place the card flat on the reader and hold it without moving. Some readers are slow and need a longer contact time to register.

5. 5

   Update your charging app payment details

   Open each charging app you use and check that the stored payment method is current. Update any expired cards.

6. 6

   Move to another charger unit

   If nothing works on this charger, try the next unit at the same station. Individual card readers fail while other units work fine.

Honda e Ny1 Charging Slower Than Expected DC and AC

You plugged in your Honda e:Ny1 expecting fast charging, but the speed is disappointing. The e:Ny1 tops out at 78 kW DC, which is slower than many competitors. Without preconditioning or a heat pump, cold weather makes it worse. Here is what is happening and what you can do.

Symptoms

• DC fast charging well below the 78 kW maximum
• AC home charging stuck at 3-4 kW instead of 11 kW
• Charging speed drops significantly after 50% state of charge
• Cold weather charging is extremely slow
• Charging from 10% to 80% takes much longer than expected

What to Do

1. 1

   Drive before charging in cold weather

   Since the e:Ny1 has no preconditioning, drive for 20-30 minutes before stopping at a DC charger in winter. The driving warms the battery through use, which improves charging acceptance.

2. 2

   Check your state of charge

   For the best speeds, arrive at the charger between 10-20% and charge to 80%. The e:Ny1's peak power is available mainly below 50%.

3. 3

   Choose a charger rated above 100 kW

   Even though the e:Ny1 maxes out at 78 kW, using a higher-rated charger ensures you are not bottlenecked by the charger. Avoid 50 kW units when faster options are available.

4. 4

   Verify your AC installation

   For home charging, confirm with your electrician that your wallbox is wired for three-phase at 16A to deliver the full 11 kW. Single-phase installations will be about a third of that speed.

5. 5

   Check if the charger is sharing power

   Look at the charger. If two cables come from the same unit and someone is using the other one, you may be sharing power. Move to a solo charger if possible.

6. 6

   Try a different charger

   If your speed is still well below 60-70 kW at a low state of charge and warm battery, the charger may be degraded. Test a different unit.

Session fails to start or charger shows an error

You plug in and try to authenticate, but the charger does not begin charging. This can happen due to communication issues between your vehicle and the charger, or a problem with authentication.

Symptoms

• Charger shows an error after you try to start a session
• Contactless card payment does not work at this station (older unit without payment terminal)
• Card reader beeps but the session does not start
• The app says the session is starting but nothing happens at the charger

How to Fix It

1. 1

   Unplug, wait 30 seconds, and try again

   The initial communication handshake between your vehicle and the charger can fail. Unplug the connector, wait at least 30 seconds, and reconnect. The second attempt often works.

2. 2

   Try starting the session through the ABC-lataus app

   If the card reader is not cooperating, open the ABC-lataus app, select the station, and start the session from your phone. This bypasses the physical card reader entirely.

3. 3

   Try contactless card payment at newer stations

   Some newer ABC-lataus high-power stations have a contactless payment terminal. If the app is not cooperating, look for a card reader on the charger unit and tap your bank card. Older stations may not have this option.

4. 4

   Try a different charger unit at the same station

   If the station has multiple charger units, switch to another one. One unit may have a hardware issue while the others work fine.

Finding the EV charger at a busy fuel station

ABC-lataus chargers are located at ABC fuel stations, which also serve diesel and petrol vehicles. The EV charging spots can be easy to miss if you are visiting for the first time.

Symptoms

• You arrived at the ABC station but cannot see the EV charger
• The charger is behind the fuel pump area or in a separate parking section
• Other vehicles (non-EV) are parked in the charging spots
• Signage is not visible from the main road entrance

How to Fix It

1. 1

   Check the ABC-lataus app for the charger's exact location

   The app shows station details including photos or layout hints. Some ABC stations place chargers at the far end of the parking area, away from the fuel pumps.

2. 2

   Look for the CCS2 cable and charging unit

   The charger unit is taller than a fuel pump and usually has a clearly different design. Look for a separate bay with a CCS2 cable, often marked with green signage or an EV symbol on the ground.

3. 3

   Drive past the fuel pumps

   At many ABC stations, the EV charger is positioned after the fuel pump area or in a dedicated corner of the parking lot. Do not stop at the fuel pumps. Continue through and scan for the charging unit.

4. 4

   If an ICE vehicle is blocking the spot, report it

   ABC stations serve all types of vehicles. If a non-EV is parked in the charging bay, contact ABC customer service through the app. Unfortunately, there is not much you can do in the moment besides trying another station.

App setup confusion within the S-Group ecosystem

The ABC-lataus app is part of the S-Group digital ecosystem. If you already use S-mobiili for groceries or fuel, the relationship between the apps can be confusing.

Symptoms

• You are not sure whether to use S-mobiili or the ABC-lataus app
• Your S-Group login works in one app but not the other
• Charging payments do not appear in your S-mobiili transaction history
• You created a new account instead of linking your existing S-Group membership

How to Fix It

1. 1

   Use the ABC-lataus app for starting and managing charging sessions

   While S-mobiili handles your broader S-Group membership, the ABC-lataus app is the dedicated tool for finding stations, starting sessions, and viewing charging history. Install it separately from the App Store or Google Play.

2. 2

   Log in with your existing S-Group credentials

   Use the same username and password you use for S-mobiili or s-kanava.fi. Do not create a new account.

3. 3

   Check payment method settings in the ABC-lataus app

   Even if you have a payment card saved in S-mobiili, the ABC-lataus app may require you to add a payment method separately. Go to settings or payment in the ABC-lataus app and add your card there.

4. 4

   Verify your account is set up for charging

   Check the ABC-lataus app settings to make sure your payment method is saved and charging is enabled.

Connector stuck or difficult to insert in winter cold

Finnish winters mean temperatures well below freezing. The CCS2 connector locking mechanism and the vehicle's charge port can freeze, making it hard to plug in or unplug.

Symptoms

• The CCS2 connector will not click into your vehicle's charge port
• The connector is plugged in but the locking mechanism will not engage
• You cannot release the connector after charging is complete
• The connector handle feels stiff or the release button is frozen

How to Fix It

1. 1

   Check your vehicle's charge port for ice

   Open the charge port door and look for ice buildup around the opening or inside the port. Brush away any loose ice or snow with your hand or a soft brush. Do not use sharp tools, as you can damage the pins.

2. 2

   Warm the connector in your hands for a moment

   If the connector handle feels frozen stiff, hold it in your hands for 30 seconds to warm the mechanism slightly. The locking button and release lever work better when they are not frozen solid.

3. 3

   Push the connector in firmly and straight

   In cold weather, plastic contracts and tolerances get tighter. Line up the connector carefully and push it in with steady, even pressure. Do not force it at an angle.

4. 4

   If the connector is stuck after charging, try unlocking from your car

   Use your vehicle's unlock button or the in-car menu to release the charge port lock. Some vehicles also release the connector when you unlock the doors. If it is still stuck, wait a few minutes. The charging session generates heat that may free the mechanism.

5. 5

   Contact support if the connector will not release

   Do not yank the connector. Forcing it can damage both the cable and your vehicle's charge port. Call ABC-lataus support and they can guide you through a remote release or send help.

Charging session starts but power delivery is low

The charger is rated for 200 kW, but your session is delivering significantly less. Several factors specific to ABC-lataus stations can contribute.

Symptoms

• Dashboard shows 30 to 50 kW at a 200 kW rated charger
• Charging speed drops after a few minutes
• Speed is lower than what you get at other fast chargers
• The charger screen shows a lower maximum than 200 kW

How to Fix It

1. 1

   Check your vehicle's maximum DC charging rate

   A 200 kW charger does not mean your vehicle can accept 200 kW. Many EVs max out at 50 to 150 kW depending on the model, battery temperature, and state of charge. Check your vehicle's specifications.

2. 2

   Consider battery temperature in Finnish conditions

   Cold batteries accept less power. If your vehicle has been parked outside in freezing temperatures, the battery may need to warm up before it can accept higher charging speeds. Some vehicles have a preconditioning feature you can activate before arriving.

3. 3

   Check if another vehicle is sharing the station's power

   Some ABC-lataus locations share power between charger units. If another vehicle is charging at the same station, your available power may be split. This is normal and not a fault.

4. 4

   Arrive with a lower state of charge for faster charging

   Charging is fastest between 10% and 50% state of charge. If you arrive at 60% or higher, the charger will taper the power to protect your battery. This is your vehicle's doing, not the charger's.