Citroen e-C4 Charging at BP Pulse

Citroen e-C4 Charger Won't Start? Step-by-Step Fix

Your Citroen e-C4 is connected to the charger but nothing is happening. No power, no progress, and maybe an error flashing on the charger screen. This is a common problem at public charging stations and it usually has a straightforward fix.

Symptoms

• CCS2 connector inserted but no charging session begins
• Charger screen shows an error code or connection failure
• The e-C4's charge port indicator does not light up or blinks red
• Charger starts to initialize but disconnects within seconds
• Type 2 connector locks in at an AC station but no power flows

What to Do

1. 1

   Complete the authentication step

   Tap your RFID card, start a session in the charging app, or use contactless payment. Follow the charger's on-screen instructions. Some networks require authentication before plugging in, others after.

2. 2

   Unplug and firmly reseat the connector

   Pull the CCS2 or Type 2 connector out completely and reinsert it straight into the charge port with a firm push until it clicks. Keep the cable aligned and support its weight.

3. 3

   Disable scheduled charging on the touchscreen

   Open the charging settings on the e-C4's central touchscreen. Turn off any scheduled or deferred charging mode so the car accepts power immediately.

4. 4

   Clean the charge port

   Check the charge port on the left rear for dirt, salt, or ice. Wipe the contacts with a dry cloth. In freezing weather, gently clear any ice from the port opening and door.

5. 5

   Lock and unlock the vehicle to reset

   Use the key fob or the MyCitroen app to lock the car, wait 10 seconds, then unlock it. This resets the charge port controller. Try plugging in again.

6. 6

   Try a different charger

   Move to another stall at the same station or find a nearby alternative. Some charger faults affect only one unit while others at the same site work fine.

Citroen e-C4: Charger Payment Failed? Quick Fixes

Your Citroen e-C4 is plugged in, but the payment is not going through. RFID rejected, app error, or bank card declined. This is entirely a charger and payment issue, not a car problem. Here is how to sort it out and start charging.

Symptoms

• RFID card rejected with an error beep or message
• Charging network app shows a payment error or session failure
• Contactless bank card declined at the charger terminal
• Pre-authorization hold appears but no charging session starts
• Charger starts briefly then stops with a billing error

What to Do

1. 1

   Check accepted payment methods on the charger

   Look at the charger's display and body for logos showing which RFID networks, apps, or card payment options are accepted.

2. 2

   Try a different payment method

   Switch from RFID to the network app, or from the app to a contactless bank card. Always carry at least two options.

3. 3

   Check your bank card balance

   Open your banking app and confirm you have enough available balance for a pre-authorization hold. Some chargers hold up to 80 EUR upfront.

4. 4

   Update or restart the charging app

   Check for updates, close and reopen the app, and look for any stuck open sessions. Log out and back in if the problem persists.

5. 5

   Use the charger's built-in card reader

   Look for a contactless card reader on the charger. More European stations now offer direct bank card payment, which bypasses RFID and app issues.

6. 6

   Call the support number on the charger

   Every public charger displays a support number. The operator can sometimes start a session remotely or diagnose the payment issue from their end.

Citroen e-C4 Charging Too Slow? How to Fix It Now

Your Citroen e-C4 can charge at up to 100 kW on a DC fast charger, but you might be getting far less. The 50.8 kWh NMC battery sits on the Stellantis e-CMP platform, and its charging behavior has some known limitations. Here is what holds back your speed and how to work around it.

Symptoms

• DC charging power stays well below 100 kW even at a high-power station
• Charging speed drops steeply before reaching 50% state of charge
• AC charging at home maxes out at 3.6 kW instead of 11 kW
• The touchscreen shows an estimated time much longer than expected
• Cold weather charging sessions take nearly twice as long as summer sessions

What to Do

1. 1

   Drive at highway speed for 15-20 minutes before fast charging

   Since the e-C4 has no battery preconditioning, active driving is the best way to warm the battery. Highway driving before your charging stop makes a meaningful difference in cold weather charging speeds.

2. 2

   Arrive at the charger between 10% and 20%

   The e-C4 charges fastest at low state of charge. Plan your stop so you arrive around 10-15% to take advantage of peak speeds. The difference between 10% and 50% arrival can be 30-40 kW.

3. 3

   Pick a charger stall that is not sharing power

   Check if two CCS2 cables come from one cabinet. Choose the stall where the other connector is free. This ensures you get the full power output from the charger.

4. 4

   Verify your home AC setup

   Check the power reading on the e-C4's touchscreen during a home AC charge. If it shows about 3.6 kW, you are on single-phase power. A three-phase upgrade unlocks the full 11 kW.

5. 5

   Monitor the charging screen

   During DC charging, watch the current power on the touchscreen. If it starts low, the battery may be warming up. Give it 5-10 minutes. Power should gradually increase as the battery temperature rises.

6. 6

   Stop DC charging at 80% on road trips

   The last 20% takes disproportionately long. On longer drives, unplug at 80% and drive to the next charging stop. You will save significant time overall.

Contactless reader not responding

You tap your bank card or phone and nothing happens. The screen does not acknowledge the tap at all, or it briefly flashes and returns to the start screen.

Symptoms

• No beep or screen change after tapping your card
• Screen flashes 'Card read error' then resets
• Apple Pay or Google Pay shows 'Done' on your phone but the charger does not start
• Reader works on one unit but not the adjacent one

How to Fix It

1. 1

   Try a physical bank card instead of your phone

   Contactless phone payments sometimes fail on BP Pulse readers even when a physical card works fine. Hold the card flat against the reader for 2-3 seconds.

2. 2

   Check for a second tap point

   Some BP Pulse units have the contactless reader on the side panel rather than below the screen. Look for a card symbol printed on the housing.

3. 3

   Clean the reader surface

   Wipe dirt, rain, or condensation off the contactless reader area with your sleeve. Moisture on the sensor can prevent a clean read.

4. 4

   Start the session via the BP Pulse app instead

   Open the app, find the charger on the map, select the connector, and tap 'Start Charging.' This bypasses the physical reader entirely.

5. 5

   Try the other connector or an adjacent unit

   If the charger has two connectors, the other side may have a working reader. Or walk to the next unit. Contactless reader failures are often limited to one specific unit.

BP Pulse app crashing on Android

The app closes unexpectedly when you try to start a session, view the map, or enter payment details. This is more common on older Android versions and after recent app updates.

Symptoms

• App closes immediately after opening
• App freezes on the map screen then crashes
• Crash when tapping 'Start Charging' after selecting a connector
• 'App keeps stopping' notification from Android

How to Fix It

1. 1

   Force close and reopen the app

   Go to Android Settings, then Apps, then BP Pulse. Tap 'Force Stop,' wait a few seconds, then open the app again.

2. 2

   Clear the app cache

   In Settings, go to Apps, then BP Pulse, then Storage, then 'Clear Cache.' This removes temporary data without deleting your account. You will not need to log in again.

3. 3

   Check for an app update

   Open the Google Play Store, search for BP Pulse, and tap 'Update' if available. Crashes often follow a buggy release that gets patched within days.

4. 4

   Use contactless payment as a backup

   If the app will not cooperate, tap your bank card on the charger's contactless reader to start a session without the app.

5. 5

   Reinstall the app if crashes persist

   Uninstall BP Pulse, restart your phone, then reinstall from the Play Store. You will need to log in again, so make sure you know your BP Pulse account email.

Charger shows 'Out of Service' with no visible damage

The screen displays 'Out of Service' or 'Unavailable,' but the charger looks perfectly fine. No broken cables, no barrier tape, no obvious reason it should be offline.

Symptoms

• Screen stuck on 'Out of Service' message
• Charger appears available in the app but shows error on arrival
• Status light is red or off entirely
• Other chargers at the same location work fine

How to Fix It

1. 1

   Check the BP Pulse app for real-time status

   Open the app and look at this specific charger. If it shows as unavailable there too, the network has flagged it remotely. A maintenance team likely already knows.

2. 2

   Look for a reset button or power switch

   Some older BP Pulse units (especially former Chargemaster ones) have a small reset button behind a panel or near the base. Pressing it can sometimes clear a stuck error state.

3. 3

   Report it in the app

   Use the 'Report a problem' option on the charger's detail page in the BP Pulse app. This helps BP Pulse prioritize repairs and updates the status for other drivers.

4. 4

   Move to another charger

   An 'Out of Service' state usually means a backend fault, a communication issue with the network, or a pending software update. You cannot fix these yourself. Use another unit or location.

Charging session drops after 5-10 minutes

Charging starts normally, but the session ends on its own after a few minutes. Your car shows it is no longer receiving power, and the charger returns to the welcome screen.

Symptoms

• Car dashboard shows charging stopped unexpectedly
• Charger screen returns to 'Plug in to start' after a few minutes
• You receive a session-ended notification in the app with a very short session
• This happens repeatedly at the same charger

How to Fix It

1. 1

   Check the connector is fully seated

   Unplug the cable, inspect the connector pins for dirt or debris, and plug it back in firmly until you hear a click. A loose connection can cause the charger to drop the session.

2. 2

   Check your car's charge limit

   If your car's charge limit is set very close to the current battery level, some vehicles will stop charging almost immediately. Set the limit to 80% or higher and try again.

3. 3

   Try the other connector type

   If the charger offers both CCS2 and CHAdeMO and your car supports CCS2, make sure you are using CCS2. Using the wrong connector obviously will not fit, but a worn CCS2 connector on one side may work better on the other unit.

4. 4

   Start a new session at a different unit

   Repeated drops at the same charger point to a hardware fault on that unit. Move to another charger and try again.

5. 5

   Report the faulty unit

   Note the charger ID (printed on the unit) and report it via the BP Pulse app or call the BP Pulse support number shown on the charger. This helps get the unit serviced.

Subscription vs pay-as-you-go pricing confusion

BP Pulse offers a subscription plan with lower per-kWh rates and a pay-as-you-go option with higher rates. It is not always clear which pricing you are on, or whether the subscription is worth it for your usage.

Symptoms

• Charged a higher rate than expected on your receipt
• Unsure whether your subscription is active
• Signed up for subscription but still seeing non-member prices
• Cannot figure out how to switch between plans

How to Fix It

1. 1

   Check your plan status in the app

   Open the BP Pulse app, go to your account settings, and look for your subscription status. If it says 'Active,' you should be getting the lower rate automatically.

2. 2

   Make sure you are starting sessions through the app

   Subscription pricing only applies when you start the session via the BP Pulse app or RFID card linked to your account. Tapping a contactless bank card will charge you the standard pay-as-you-go rate.

3. 3

   Review your charging history for rate discrepancies

   In the app, go to Charging History and check the per-kWh rate on recent sessions. Compare this to the subscription rate listed on the BP Pulse pricing page.

4. 4

   Cancel or change your plan if needed

   You can manage your subscription in the app under Account, then Subscription. If you charge infrequently, pay-as-you-go may actually cost less overall despite the higher per-kWh rate.