Citroen e-C4 Charging at Atlante

Citroen e-C4 Charger Won't Start? Step-by-Step Fix

Your Citroen e-C4 is connected to the charger but nothing is happening. No power, no progress, and maybe an error flashing on the charger screen. This is a common problem at public charging stations and it usually has a straightforward fix.

Symptoms

• CCS2 connector inserted but no charging session begins
• Charger screen shows an error code or connection failure
• The e-C4's charge port indicator does not light up or blinks red
• Charger starts to initialize but disconnects within seconds
• Type 2 connector locks in at an AC station but no power flows

What to Do

1. 1

   Complete the authentication step

   Tap your RFID card, start a session in the charging app, or use contactless payment. Follow the charger's on-screen instructions. Some networks require authentication before plugging in, others after.

2. 2

   Unplug and firmly reseat the connector

   Pull the CCS2 or Type 2 connector out completely and reinsert it straight into the charge port with a firm push until it clicks. Keep the cable aligned and support its weight.

3. 3

   Disable scheduled charging on the touchscreen

   Open the charging settings on the e-C4's central touchscreen. Turn off any scheduled or deferred charging mode so the car accepts power immediately.

4. 4

   Clean the charge port

   Check the charge port on the left rear for dirt, salt, or ice. Wipe the contacts with a dry cloth. In freezing weather, gently clear any ice from the port opening and door.

5. 5

   Lock and unlock the vehicle to reset

   Use the key fob or the MyCitroen app to lock the car, wait 10 seconds, then unlock it. This resets the charge port controller. Try plugging in again.

6. 6

   Try a different charger

   Move to another stall at the same station or find a nearby alternative. Some charger faults affect only one unit while others at the same site work fine.

Citroen e-C4: Charger Payment Failed? Quick Fixes

Your Citroen e-C4 is plugged in, but the payment is not going through. RFID rejected, app error, or bank card declined. This is entirely a charger and payment issue, not a car problem. Here is how to sort it out and start charging.

Symptoms

• RFID card rejected with an error beep or message
• Charging network app shows a payment error or session failure
• Contactless bank card declined at the charger terminal
• Pre-authorization hold appears but no charging session starts
• Charger starts briefly then stops with a billing error

What to Do

1. 1

   Check accepted payment methods on the charger

   Look at the charger's display and body for logos showing which RFID networks, apps, or card payment options are accepted.

2. 2

   Try a different payment method

   Switch from RFID to the network app, or from the app to a contactless bank card. Always carry at least two options.

3. 3

   Check your bank card balance

   Open your banking app and confirm you have enough available balance for a pre-authorization hold. Some chargers hold up to 80 EUR upfront.

4. 4

   Update or restart the charging app

   Check for updates, close and reopen the app, and look for any stuck open sessions. Log out and back in if the problem persists.

5. 5

   Use the charger's built-in card reader

   Look for a contactless card reader on the charger. More European stations now offer direct bank card payment, which bypasses RFID and app issues.

6. 6

   Call the support number on the charger

   Every public charger displays a support number. The operator can sometimes start a session remotely or diagnose the payment issue from their end.

Citroen e-C4 Charging Too Slow? How to Fix It Now

Your Citroen e-C4 can charge at up to 100 kW on a DC fast charger, but you might be getting far less. The 50.8 kWh NMC battery sits on the Stellantis e-CMP platform, and its charging behavior has some known limitations. Here is what holds back your speed and how to work around it.

Symptoms

• DC charging power stays well below 100 kW even at a high-power station
• Charging speed drops steeply before reaching 50% state of charge
• AC charging at home maxes out at 3.6 kW instead of 11 kW
• The touchscreen shows an estimated time much longer than expected
• Cold weather charging sessions take nearly twice as long as summer sessions

What to Do

1. 1

   Drive at highway speed for 15-20 minutes before fast charging

   Since the e-C4 has no battery preconditioning, active driving is the best way to warm the battery. Highway driving before your charging stop makes a meaningful difference in cold weather charging speeds.

2. 2

   Arrive at the charger between 10% and 20%

   The e-C4 charges fastest at low state of charge. Plan your stop so you arrive around 10-15% to take advantage of peak speeds. The difference between 10% and 50% arrival can be 30-40 kW.

3. 3

   Pick a charger stall that is not sharing power

   Check if two CCS2 cables come from one cabinet. Choose the stall where the other connector is free. This ensures you get the full power output from the charger.

4. 4

   Verify your home AC setup

   Check the power reading on the e-C4's touchscreen during a home AC charge. If it shows about 3.6 kW, you are on single-phase power. A three-phase upgrade unlocks the full 11 kW.

5. 5

   Monitor the charging screen

   During DC charging, watch the current power on the touchscreen. If it starts low, the battery may be warming up. Give it 5-10 minutes. Power should gradually increase as the battery temperature rises.

6. 6

   Stop DC charging at 80% on road trips

   The last 20% takes disproportionately long. On longer drives, unplug at 80% and drive to the next charging stop. You will save significant time overall.

New station with teething problems

Atlante is expanding rapidly, and many stations are brand new. Newly installed chargers sometimes have firmware bugs, incomplete network configuration, or hardware that has not been fully tested under real-world conditions.

Symptoms

• Charger turns on but fails to communicate with your vehicle
• Session starts but drops after a few seconds
• Charger screen shows an error code you have never seen before
• Station appears on the map but the chargers are not yet operational

How to Fix It

1. 1

   Try a different charger at the same station

   New stations often have multiple units and the issue may be limited to one charger. Try another unit before giving up on the location.

2. 2

   Unplug, wait 30 seconds, and retry

   New charger firmware sometimes fails on the first handshake but succeeds on the second attempt. A short wait lets the charger reset its session state.

3. 3

   Start the session through the Atlante app

   If the charger's screen or contactless reader is not working properly, the app provides a separate communication path to the charger's backend. This can bypass local hardware issues.

4. 4

   Check the Atlante app for station status notes

   Atlante sometimes posts notices about newly activated stations that are still in testing. The station detail page in the app may show a note about limited functionality.

5. 5

   Report the issue and move to the next station

   Use the Atlante app to report the problem. New station issues are usually fixed quickly once reported. Check the app for the nearest alternative Atlante or competitor station.

App crashes on older phones

The Atlante app can be unstable on older phones or phones running outdated operating systems. The app may crash during login, while loading the map, or in the middle of starting a session.

Symptoms

• App closes unexpectedly when you open the station map
• App freezes during the payment screen
• Login screen loads but the app crashes after entering credentials
• App works briefly but crashes when you try to start a session

How to Fix It

1. 1

   Update the Atlante app to the latest version

   Atlante pushes frequent updates that fix stability issues. Open the App Store or Google Play and check for updates before your trip.

2. 2

   Clear the app cache

   On Android, go to Settings, Apps, Atlante, and clear the cache. On iPhone, delete and reinstall the app. Corrupted cache data is a common cause of crashes.

3. 3

   Check your phone's operating system version

   The Atlante app may require iOS 15+ or Android 10+. If your phone is on an older version, update if possible. If your phone cannot update, you may need a roaming app as a backup.

4. 4

   Use contactless payment as a fallback

   If the app keeps crashing and the station supports contactless, tap your credit or debit card on the charger's payment terminal. Not all Atlante stations have this yet, but it completely bypasses the app.

5. 5

   Try a roaming app

   Apps like Chargemap, Shell Recharge, or Electropass can start sessions at Atlante stations without using the Atlante app. Check roaming coverage before relying on this.

Contactless payment terminal not activated

Atlante is rolling out contactless card payment across its network, but not every charger has an active terminal yet. Some units have the hardware installed but the payment function is not turned on.

Symptoms

• Card reader is visible on the charger but does not respond to a tap
• Screen says 'Use app to start' with no contactless option shown
• Contactless symbol is printed on the charger but the reader light is off
• You see a payment terminal but tapping produces no response

How to Fix It

1. 1

   Download and use the Atlante app

   At stations where contactless is not yet active, the Atlante app is the primary payment method. Download it before your trip and add a payment card in advance.

2. 2

   Check the charger screen for payment instructions

   Some Atlante chargers display which payment methods are currently available. If contactless is not listed, the terminal is not active at that unit.

3. 3

   Try a different charger at the same station

   Contactless activation sometimes rolls out unit by unit. Another charger at the same station may have an active terminal.

4. 4

   Use a roaming RFID card or app

   If you have an RFID card from a roaming provider, try tapping it. Some Atlante stations accept roaming RFID even when the contactless card terminal is not active.

Charger screen hard to read in direct sunlight

Some Atlante charger screens have low brightness levels that make them nearly impossible to read in bright sunlight. This is especially common at stations in Southern Europe during summer.

Symptoms

• Screen content is barely visible outdoors during the day
• You cannot read the price, status, or error messages on the screen
• Screen appears to be off but the charger is actually on
• You have to cup your hands around the screen to read it

How to Fix It

1. 1

   Use your body or hand to shade the screen

   Stand to block direct sunlight from hitting the screen. Even partial shade can make the display readable.

2. 2

   Take a photo of the screen with your phone

   Your phone camera can sometimes capture what your eyes cannot. Take a photo and zoom in to read the text.

3. 3

   Use the Atlante app to monitor your session

   All session information (charging speed, energy delivered, cost, estimated time) is available in the app. You do not need the charger screen to track your session.

4. 4

   Start the session entirely through the app

   If you cannot read the screen at all, use the Atlante app to select the charger, start the session, and stop it when done. This avoids needing to interact with the screen.

Cable connector requires specific angle to lock

Some Atlante charger cables need to be inserted at a particular angle or with extra force for the CCS2 connector to seat properly. If it is not fully locked, the session will not start.

Symptoms

• Connector feels like it is in but the charger does not recognize it
• Charger screen says 'Connect cable' even though the cable is plugged in
• You hear a partial click but the connector is not locked
• Connector slides back out after you let go

How to Fix It

1. 1

   Push the connector straight in, then slightly upward

   Some Atlante CCS2 connectors need a slight upward tilt after the initial push to engage the locking mechanism. You should feel and hear a solid click.

2. 2

   Check for debris in the vehicle's charging port

   Dust, ice, or a small pebble in the port can prevent the connector from seating fully. Inspect the port and brush out anything you find.

3. 3

   Make sure the vehicle is unlocked and ready to charge

   Some vehicles lock the charging port flap or disable the inlet when the car is locked or in drive mode. Ensure the car is in park and unlocked.

4. 4

   Try a different cable if the charger has two

   If the charger has two CCS2 cables, try the other one. One cable may have a slightly worn connector that does not seat as easily.